GO Cinema LED Home Cinema Projector HD 1080p
Bring the THEATER ANYWHERE!
Introduction
Enjoy your favorite media – whether it be video games, movies, photos, and text – with dynamic, enhanced visuals and the convenience of portability. The GO Cinema is a compact projector that delivers a distinctive, home theater experience anywhere you like. Be it indoors or outdoors, all you'll need is the right darkened space, a solid place to project, and the perfect vibes will be set in motion thanks to you and the GO Cinema!
Please read this manual carefully before using and/or setting up the Go Cinema, and keep it handy for future reference, as needed.
Features
- A 60" dynamic image
- LED lifetime up to 30,000 hours
- Works best for in-home, dark environment video entertainment
What's in the Box?
- 1- Go Cinema projector
- 1- Wireless Remote
- 1- Lens Cover
- 1- AC Power Adapter
- 1- HDMI Cable
- 1- AV/RCA Cable
- 1- User Manual
Getting Started
Connect the power cable (DC12V 2A) on the right side of the projector then plug it into an available outlet.
Once plugged in, the control keys on top of the projector will light up.
Press the POWER button [▶️] on the projector or the remote control to turn on the projector.
Let's Take a Look at the Remote
PLEASE NOTE: The Go Cinema's remote is powered by two AA batteries. Please insert them before use.
Description of the remote control: A black remote with buttons labeled Power, Source, Menu, Up [⬆️], Left [⬅️], Right [➡️], Down [⬇️], OK, Play/Pause, Vol+.
Let's Get Started - The Boot Screen
When the Go Cinema powers up, after two to five seconds, the main display will be shown, and icons will flash. You can use the arrow button(s) on the remote, or the arrow buttons on the top of the Go Cinema itself, to make the appropriate selection.
Description of the boot screen: The projector's main display shows icons for Media, Settings, and Input Source. The 'Media' icon is typically highlighted for selection.
Let's Get Connected!
When connecting a signal source to the Go Cinema, be sure to:
- Use the correct type of cables for each source.
- Be sure the cables are firmly inserted.
- In the connection illustrations shown below, some cables may not be included with the projector (see WHAT'S IN THE BOX?). They are commercially available online and/or from electronics stores.
Using HDMI Devices
HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between compatible devices such as: Laptops, DTV tuners, DVD players, Blu-ray players, Chromecast, Fire TV, etc. HDMI transmits both video and audio signals via a single cable. You should use the included HDMI cable when making a connection between the Go Cinema and compatible HDMI devices. The HDMI port is on the right side panel of the Go Cinema and is marked "HD."
Description of the HDMI connection: The projector's right side panel is shown with an HDMI port labeled "HD." A table lists supported file formats and resolutions: 576p, 480p, 720p, 1080p, 640x480, 800x600, 1024x768, 1280x1024, 1280x720, 1440x900, 1920x1080, 1366x768, 1280x800, 1440x960, 1600x1200, 1680x1050.
Using an AV/RCA Connection
Follow the diagram below to connect the Go Cinema to a device that has RCA (yellow/red/white) inputs. You should use the included AV/RCA cable when making a connection between the Go Cinema and compatible AV devices. The female AV/RCA connector is on the right side panel of the Go Cinema and is marked "AV."
Description of the AV/RCA connection: The projector's right side panel is shown with an AV port labeled "AV."
Using a USB Connection or Micro SD Card to Play Media
Insert a USB stick with media into the USB socket located on the right side of the Go Cinema (it is marked 'USB'). The Micro SD slot is on the back and marked 'Micro SD'.
Description of USB and Micro SD ports: The projector's right side panel shows a USB port labeled 'USB'. The back panel shows a Micro SD slot labeled 'Micro SD'.
When you select the Media icon, you'll see the Go Cinema screen as below.
Description of the Media selection screen: The projector's interface displays options to select Photos, Music, Video, or Text.
From this menu, you can use the remote (or the keys on top of the projector) to choose the content you wish to display: Photos, Music, Video, or Text.
Description of the subfolder selection screen: The projector's interface shows a grid of icons representing different media types and folders, allowing users to navigate to specific files.
| Category | System Requirement |
|---|---|
| Audio file | MP3/WMA/OGG/AAC/FLAC/APE/WAV |
| Image file | JPEG/BMP/PNG |
| Video file | Full Format Support |
| Text file | TXT |
Using the Audio/3.5mm Connection
This jack can be used to connect 3.5mm headphones or external speakers. It is located on the back of the Go Cinema.
Description of the Audio/3.5mm connection: The back panel of the projector shows a 3.5mm audio jack, with an icon representing headphones.
Regarding Menus
Use the remote control to navigate the menus. Press the MENU key to access the main menu, then use LEFT/RIGHT keys to select a submenu, and UP/DOWN keys to adjust settings. Press the OK key to confirm your selection.
Image Menu
In the IMAGE submenu, you can select the following modes:
- Picture Mode (text, video, picture, user defined)
- Color Temperature (cold, hot, user defined)
- Aspect Ratio (auto, 4:3, 16:9, point-to-point, panoramic, zoom1, zoom2, just scan)
- Noise Reduction (close, low, middle, high)
Description of the Image menu screen: Shows 'MENU' and 'IMAGE' selected, with options like 'Picture Mode', 'Color Temperature', 'Aspect Ratio', and 'Noise Reduction'.
Audio Menu
In the AUDIO submenu, you can set:
- Sound Mode (music, power, sports, user defined)
- Balance (-50 to +50)
- Frequency adjustments (120Hz, 500Hz, 1.5Hz, 5Hz, 10Hz)
- Auto Volume (on or off)
- Surround Sound (close, surround, SRS)
Description of the Audio menu screen: Shows 'MENU' and 'AUDIO' selected, with options like 'Sound Mode', 'Balance', 'Auto Volume', and 'Surround Sound'.
Time Menu
In the TIME submenu, you can set:
- Clock (standard or 24 hr./military)
- Off Time
- On Time
- Sleep Timer (30 min., 60 min., 90 min., or user defined)
- Auto Sleep
Description of the Time menu screen: Shows 'MENU' and 'TIME' selected, with options like 'Clock', 'Off Time', 'On Time', 'Sleep Timer', and 'Auto Sleep'.
Option Menu
In the OPTION submenu, you can set:
- Text Language (23 choices)
- Restore Projector Back to Factory Default Settings
- Auto Set the Color Range
- Update Software/Firmware via the USB port
Description of the Option menu screen: Shows 'MENU' and 'OPTION' selected, with options like 'Text Language', 'Restore Projector Back to Factory Default Settings', 'Auto Set the Color Range', and 'Update Software/Firmware'.
Specifications
- Display Native Resolution: 320 x 240
- Contrast: 800:1
- HDMI Supported Video Resolution: 1920 x 1080
- Power Consumption: 10W – 24W (operating)
- Display Color: 16.7K
- Projection Size: 24-60"
- Supported Signal/Input Ports: USB/HDMI/Micro SD Card/3.5mm/AV-RCA
- Dimensions: 5.1" x 3.6" x 2" (129 x 91 x 52mm)
Important Safeguards
- Use the Go Cinema only as intended and as described in this manual.
- Do not look into the Go Cinema's lens while the projector is working.
- Do not put any cloth (or other materials) over the ventilation holes of the GO Cinema.
- The Go Cinema is not water-proof, so do not get it wet or place a vase, cup, bowl, etc. anywhere near it.
- The Go Cinema should always be used (and stored) in a dry and clean place.
- If the Go Cinema is not in use for a long period, be sure that it is off and the power cord is unplugged.
- Please use the factory original foam and other shockproof materials when transporting the Go Cinema.
- If the Go Cinema is defective or broken, do not attempt to repair it yourself. Please contact tzumi customer support to arrange for proper repair protocols.
- To avoid risk of electric shock, do not disassemble (or attempt to repair) the Go Cinema in any way, shape, or form.
Support and Contact
If you have any other questions or issues with product use and/or care, please contact tzumi Technical Support at: support@tzumi.com or call us at: 1-855-GO-TZUMI.
tzumi™ Inc. Distributed by tzumi Inc. NY, NY 10016. © Copyright 2020 tzumi Inc. All Rights Reserved. Made in China. Other trademarks and trade names are those of their respective owners. Subject to change without prior notice.
Brand: tzumi. Tagline: life just got better.
Certifications: CE, FCC, RoHS
