Glow Bowl LED Toilet Backlight User Manual

Introduction & Features

Perfect for decorating any indoor bathroom, the tzumi Glow Bowl adjusts seamlessly to fit any standard toilet bowl rim and provides a fun, colorful glow to guide you in the dark. Equipped with a light sensor and motion detector, the unit illuminates in the dark and turns off when light is detected to save battery life.

Product Overview & Functions

Product Description: A toilet bowl light with a flexible arm for mounting, featuring a motion and light sensor, LED light, and a button for color selection.

Key Components:

Flexible Arm: For secure attachment to the toilet bowl rim.
LED Selection Button: To choose and set LED colors.
Light/Motion Sensor: Detects movement and ambient light to activate the LED.
Battery Compartment (Back): Houses the batteries.
LED Light: Emits the colored light.

Features:

Built-In Motion Sensor & Light Detection
Perfect for Night Light and Decoration
Flexible Universal Mounting System
Installs in Seconds & Easy to Clean

Package Contents

1 Glow Bowl LED Toilet Backlight
User Manual

Using Your Glow Bowl Device

Note: The Glow Bowl usually works best if the sensor faces the door, but this may vary per room environment/light conditions. Adjust as needed for best results.

Step 1: Fit to Your Toilet

Adjust the bending arm as needed to secure a tight fit to the rim of your toilet bowl.

Step 2: Install Your Glow Bowl

Open the battery compartment. Insert 3 AAA batteries into the compartment as shown and replace the cover.
Use the Glow Bowl's flexible arm to secure the unit to your toilet rim as shown. Make sure the button is facing outwards and away from the toilet.

Step 3: Turn Off the Lights

The Glow Bowl will only operate in the dark. When the sensor detects movement, the LED will turn on and remain lit for about 120 seconds from the last detected movement.
If the room lights are on, the Glow Bowl will remain off to conserve battery life. The unit may remain turned on in dimmed lighting.

Step 4: Determine Your Color Settings

The unit will automatically cycle through all available LED colors.
Press the LED Selection Button to set a single color when the cycle hits your desired color.
Press the LED Selection Button a second time to start the color cycle again.

Tips for Cleaning & Care

To clean, wipe the unit down with a wet wipe, damp cloth, or sponge. Chemical cleaners may be used if necessary.
The Glow Bowl is designed for daily use with indoor toilets/bathrooms only.
Do not immerse the Glow Bowl in water or place directly under running water. ??

Safety Precautions

This product uses batteries (not included). Keep away from flammable objects and excessive heat. ??
Never attempt to disassemble or modify your Glow Bowl. Doing so violates warranty and may cause permanent damage.
Contact the Customer Support team at tzumi.com/Support for assistance.

Specifications

Batteries Required: AAA x 3
Dimensions: 2.5 x 2.5 x 5.0 in. (Arm Length: 4.25 in.)
Weight: 1.3 oz.

	HaloGlow 8" LED Ring Light User Manual User manual for the Tzumi HaloGlow 8" LED Ring Light, detailing features, setup instructions, product overview, controller functions, package contents, specifications, and troubleshooting.
	Tzumi Multi Color Light Bar User Guide User guide for the Tzumi Multi Color Light Bar, detailing its features, setup, app control, remote functions, and safety precautions.
	ColorGalaxy Starlight Projector User Guide \| Tzumi Learn how to use your Tzumi ColorGalaxy Starlight Projector. This guide covers features, functions, specifications, and safety information for creating a magical starry atmosphere.
	Tzumi AuraLED ColorGalaxy Starlight Projector User Manual User manual for the Tzumi AuraLED ColorGalaxy Starlight Projector, detailing its features, product overview, functions, specifications, and safety guidelines.
	AuraLED Moodlight ColorStrip LED Lights 10' User Guide User guide for the AuraLED Moodlight ColorStrip 10-foot LED lights, detailing features, product overview, installation, remote control operation, specifications, and safety precautions.
	tzumi ProBuds Totally Wireless Earbuds User Manual - Setup & Controls Comprehensive user manual for tzumi ProBuds Totally Wireless Earbuds, covering setup, pairing, controls, charging, troubleshooting, and important safety information for models Tzumi-TWE-L and Tzumi-TWE-R.
	HaloFlex Duo 3.5" LED RingLight User Manual User manual for the Tzumi HaloFlex Duo 3.5-inch LED RingLight, providing setup instructions, product features, specifications, and troubleshooting tips for this versatile selfie lighting and phone holder.
	tzumi On Air Halo Stick Pro 5.5' LED RingLight User Manual User manual for the tzumi On Air Halo Stick Pro, a 5.5-foot LED ring light with a Bluetooth shutter, compatible with iPhone and Android devices. Includes setup, pairing, and charging instructions.