Anker Soundcore Select 4 Go Bluetooth Speaker

At a Glance

The Soundcore Select 4 Go speaker features the following controls and indicators:

Charging Your Speaker

Use a certified USB-C cable and charger to prevent any damage.

Battery Status Indicators:

Powering On / Off

To Power On:

• Press or Press and Hold the [Power Button] for 2 seconds. The LED will flash white then blue.

To Power Off:

• Press and Hold the [Power Button] for 2 seconds. The LED will turn off.

This speaker will power off automatically after 20 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode

Press the [Bluetooth Button] to enter Bluetooth pairing mode, then select "soundcore Select 4 Go" from the Bluetooth list on your device to connect.

Bluetooth Status Indicators:

• If the speaker is not connected to a device within 3 minutes after being powered on, it will automatically exit Bluetooth pairing mode.
• To re-enter Bluetooth pairing mode, press the [Bluetooth Button] once.

This speaker can only play music on one mobile device at a time. If another connected device starts playing music, the speaker will automatically take over and interrupt the current playback without requiring the first device to pause.

Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the [Bluetooth Button] to enter Bluetooth pairing mode.

True Wireless Stereo (TWS) Mode

Two identical Soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel).

With one speaker connected to a smartphone, press and hold the [Bluetooth Button] for 2 seconds on both speakers simultaneously to enter TWS pairing mode.

TWS Status Indicators:

Button Controls

soundcore App

Download the soundcore app to enhance your experience.

Get it on Google Play
Download on the App Store

Product Information: Check the product name and software version, or read the user manual.

Firmware Update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.

Battery Status: Indicates the remaining battery level of your speaker.

Volume Control: Adjust the volume level via the app without pressing the buttons on the speaker.

EQ Settings: There are various preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres:

• soundcore Signature: Standard EQ mode optimized for well-balanced sound.
• Balanced: No enhancement for high-frequency and low-frequency sounds.
• Treble Boost: High frequencies are enhanced.
• Bass Boost: Enhances low frequencies for a deeper, richer bass experience.

Set Auto-power Off Time: The speaker will automatically power off when time is up.

Voice Prompt: Mute or restore the voice prompt while powering on/off.

Reset

Press and hold the [Bluetooth Button] and [Volume Up Button] simultaneously for at least 8 seconds to reset the speaker.

Specifications

Specifications are subject to change without notice.

Compliance

Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.

For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages/psti-related.

SN Code Variable Explanation

Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.