Arcade1Up XL Size Owner's Manual
Featuring Golden Tee 3D Golf and Midway Arcade Classics
Safety Precautions
WARNING: Read and comprehend all warnings before use. Do not get the arcade wet when cleaning. Parents and guardians should read the entire manual before allowing a gamer to play. The AC/DC adapter and apparatus should not be exposed to dripping or splashing. Do not place objects filled with liquids on the apparatus. Ensure adequate ventilation (minimum 10 cm / 3.94 inches around the apparatus) and avoid covering ventilation openings. Do not place naked flame sources on the apparatus. Use only in moderate climates.
EPILEPSY WARNING: A small percentage of individuals may experience epileptic seizures or blackouts when exposed to flashing lights. Take a 10-15 minute break every hour of playing to reduce this risk.
FCC/ISED STATEMENT: This device complies with FCC and ISED regulations. Operation is subject to conditions that it does not cause harmful interference and accepts any interference received. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, try reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.
Important Safety Instructions
- Read and keep these instructions.
- Heed all warnings and follow all instructions.
- Do not use the apparatus near water.
- Clean only with a dry cloth.
- Do not block ventilation openings. Install according to manufacturer's instructions.
- Do not install near heat sources.
- Do not defeat the safety purpose of polarized or grounding-type plugs. Consult an electrician for outlet replacement if needed.
- Protect the power cord from being walked on or pinched.
- Only use manufacturer-specified attachments/accessories.
- Unplug during lightning storms or when unused for long periods.
- Refer all servicing to qualified personnel.
- Use at ambient temperatures between 32° - 95°F (0° - 35°C).
- TIP OVER HAZARD: Secure the apparatus in place using provided mounting means to prevent instability and potential injury.
Installation
This game is designed for indoor and personal use only. It must not be installed outdoors. Avoid direct sunlight, high humidity, direct water contact, dust, high heat, extreme cold, and vibration. Install on a level surface. Do not install where the game could obstruct emergency exits or equipment.
Specifications
Power Supply: AC/DC Adapter (Manufacturer: Dong Guan Royal Intelligent Co., Ltd., Model: BI36L-120300-I-LED)
Input Power: AC 100-240V~50/60Hz 1.2A Max
Output Power: DC12.0V --- 3.0A 36.0W
Monitor: 19" LCD
Cabinet Assembled Dimensions: 65.7"x 22"x 27.2" (166.8cm x 55.8cm x 69cm)
Efficiency: Average Active Efficiency: 88.39%, Efficiency at Low Load (10%): 85.828%, No-Load Power Consumption: 0.080W
The AC/DC adapter serves as the disconnect device and should remain accessible. To completely disconnect power, unplug the AC/DC adapter from the mains.
For EU ErP energy efficiency information, visit: http://arcade1up.com/apps/help-center#hc-what-is-the-energy-efficiency-of-the-adaptors
Assistance or Service
Before contacting for assistance or service, check the "Troubleshooting" section in the User Manual. For further questions or technical support, contact Arcade1UP Customer Service at www.Arcade1UP.com and click on "Support".
Game Settings
- Move the cursor to the gear icon using the trackball.
- Press "START" to enter game settings.
- Move the cursor using the trackball to adjust settings.
- Select "HIDE THIS MENU" and press "START" to save & exit.
Game Controls
Note: Arcade may take 10-15 seconds to power on after switching on.
- Move the cursor to the game icon using the trackball.
- Press "START" to choose a game.
- Follow game controls below for each game.
- Press "LIVE" button to bring up the pause menu.
- Select "QUIT GAME" in the pause menu to exit the game.
Available Games: Golden Tee 3D Golf, Golden Tee '97, Golden Tee '99, Golden Tee '98, Golden Tee 2K, World Class Bowling, Shuffleshot, Bubbles, Defender, Gauntlet, Gorf, Joust, Klax, Paperboy, Rampage, Sinistar, Tapper, Toobin, Wizard of War.
Control Layout Description: The control panel features two player setups, each with a joystick and several action buttons. Specific button functions vary by game. Key controls include a trackball, START buttons, LIVE buttons, and various action buttons labeled with game-specific functions (e.g., FIRE, JUMP, PUNCH, HOOK LEFT/RIGHT, PEDAL, THROW, POUR, etc.). Light-up buttons are also present.
Troubleshooting
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|---|---|
Game will not turn on. | -Power cord not plugged in. -Wires/Plugs incorrect. -Upload switch on back of monitor OFF. |
-Ensure power cord is plugged in and outlet has power. -Ensure all Wires/Plugs are properly connected. -Set ON/OFF Switch on control deck to ON. -Set upload switch on back of monitor to ON. |
Game will turn ON, but no sound. | -Wires/Plugs incorrect. -Volume Switch OFF. |
-Ensure all Wires/Plugs are properly connected. -Set Volume Switch to the right (increase volume). |
Sound but no picture. | -Wires/Plugs incorrect. | -Ensure all Wires/Plugs are properly connected. |
Game screen frozen. | -Game encountered a processing problem. | -Turn ON/OFF switch OFF, unplug for 60 seconds, then turn back ON. -Reset the game by power cycling. |
Marquee won't light up. | -Marquee power cord not plugged in. -Marquee power cord plugged into wrong input. -Wires/Plugs incorrect. |
-Ensure all Wires/Plugs are properly connected. |
Screen pixelated or lines through image. | -Wires/Plugs incorrect. | -Ensure all Wires/Plugs are properly connected. -Reset the game by power cycling. |
Control deck button stuck. | -Debris between button and housing. | -Use a thin object (like a business card) to slide between the button and housing to loosen debris. |
Cannot scroll through games. | -Using wrong joystick or buttons. | -Refer to the game control section in the manual for correct controls. |
Can scroll, but cannot enter a game. | -Pressing wrong button to enter. | -Refer to the game control section in the manual for correct controls. |
Entered game, but cannot start. | -Pressing wrong button to start. | -Refer to the game control section in the manual for correct controls. |
Entered game, but cannot exit. | -Pressing wrong button to exit. -Not holding exit button long enough. |
-Refer to the game control section in the manual for correct controls. -Hold the exit button down for 5 seconds. |
Control functions printed on deck do not match gameplay. | -Using wrong game control buttons. -Printed controls are for feature cabinet game only. |
-Refer to the game control section in the manual for correct controls. -Check the game loading screen for correct controls. |
Cannot select 2 or 3 players. | -Game may only support 1 or 2 players. | -Refer to the game control section in the manual to see player limitations. |
Safe Gaming Environment
WARNING: To enjoy a safe gaming environment, please use the wall anchor kit included with the product.
Preventing Tip-Over: Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:
- Set up Arcade1UP on a level floor.
- Never allow children to climb or hang on the product.
- Always set up an anti-tip device!
Use of tip-over restraints may reduce, but not eliminate, the risk of tip-over. Arcade1UP assumes no liability for improper installation or excessive loads placed on screws or brackets. The wall anchor is not a substitute for proper adult supervision. Ensure your Arcade1UP is located on a flat surface.
FCC RF RADIATION EXPOSURE STATEMENT: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20cm between the radiator and any part of your body.
ISED RF RADIATION EXPOSURE STATEMENT: This equipment complies with IC RSS-102 radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20cm between the radiator and any part of your body.