Midland Bike Guardian Wi-Fi Dash Cam
Your essential companion for capturing your rides.
Key Features
- Type: Camera/Dash cam
- Resolution: Full HD 1080p / HD 720p/WVGA/VGA
- Durability: IP68 rating ?️ (dust and water resistant)
- Recording: Cycle recording
- Photo Resolution: 12MP ?
- Video Format: 1080p at 30fps
- Field of View: 170° Wide Angle ?️
- Connectivity: Wi-Fi ? (2.4GHz)
- Wi-Fi Output Power: 0.37W
- Battery Life: Up to 60 minutes
Device Overview & Controls
The dash cam features a compact design with several key components:
Main Unit Components:
- 1. Lens: The primary optical component for capturing video and photos.
- 2. Blue LED: Indicates power status (on).
- 3. ON Button: Powers the device on/off.
- 4. Red LED: Indicates recording status.
- 5. Photo/REC Button: Used to start/stop recording or take photos.
- 6. Screw Cap: Protects the lens or other ports.
Ports and Indicators:
- 7. Microphone: Captures audio.
- 8. Micro SD Slot: For memory card storage.
- 9. Recharge Connector: Port for charging the device (e.g., USB).
- 10. Mode Selector: Switch between video and photo modes.
- 11. Reset Button: For resetting the device.
Diagrams illustrating these components are available in the original manual.
What's in the Box
The package typically includes:
- USB cable
- Waterproof USB cable with rubber gaskets
- Lock mount with spare screws
- Bi-adhesive mount (includes GO-PRO adaptor, screw, quick release mount, flat mount with bi-adhesive)
- Handlebar mount
- Suction cup mount
- Allen wrench
Visuals of these accessories are provided in the original documentation.
Battery Recharge
The BIKE GUARDIAN WI-FI can be recharged using the provided USB cable connected to a suitable charger or a PC. The blue LED will illuminate during charging and turn off once the battery is fully charged.
Recording and Operating Modes
A selector on the rear of the camera allows you to choose between two operating modes:
- Video Mode: The camera automatically starts recording when powered on and stops when powered off. If the microSD card is full, it will overwrite the oldest files to continue recording. If the camera is not powered on, press the red Photo/REC button to start or stop recording.
- Photo Mode: Turn on the BIKE GUARDIAN WI-FI and press the red Photo/REC button to capture a photo ?.
Micro SD Card Usage
Formatting: It is recommended to format the microSD card before first use. Turn on the camera and press the red button until the red LED turns off. Then, turn the camera off and on again.
Compatibility: The device supports microSD cards from 8GB up to 64GB. Midland recommends using a 32GB card.
Performance: For optimal performance, use Class 10 U3 speed or higher SD cards.
Maintenance: Regularly delete data from the memory card to ensure smooth operation.
Downloading Files
From PC: Connect the camera to a PC using the USB cable. It will be automatically recognized as a webcam. To switch to Mass Storage Mode, briefly press the Power button.
Via "VISIONBANK" App: The VISIONBANK app allows remote control of the camera using a smartphone or tablet. Activate Wi-Fi ? by pressing the Wi-Fi button on the rear of the camera. In your smartphone's Wi-Fi settings, connect to the network named "SSID: Bike Guardian WIFI" and enter the password "12345678".
QR codes for downloading the app are provided in the original documentation.
Further Information
For the complete user manual and warranty information, please visit www.midlandeurope.com.
