S26 Smart Socket USER GUIDE
Welcome to using the S26 Smart Plug in EU(E&F)/US/UK/CN/AU Standard.
1. Download "eWeLink" app.
Install the APP
Search "eWeLink" in the App Store for the iOS version or Google Play for the Android version.
2. Add device
- Plug in and power up your S26 Socket.
- Press the button for 7 seconds until the green LED blinks rapidly.
Open eWeLink, click "+". You will see the pairing icons.
Select Quick Pairing Mode (TOUCH), tap Next.
It will auto-search and connect to smart home devices around you.
- It will auto-select your home SSID. Please enter the password.
- If there is no password, keep it blank.
- Currently, eWeLink only supports the 2.4G WiFi communication protocol. 5G-WiFi is not supported.
Name the device to complete the process.
The device might appear as "Offline" in eWeLink initially. It needs about 1 minute to connect to your router and the server. When the green LED stays on, the device is "Online". If eWeLink still shows "Offline", please close and reopen the eWeLink app.
3. APP features
-
WiFi remote control and device state
Turn devices on/off by tapping the device icon. The device status is always displayed simultaneously on the APP.
-
Share Control
The owner can share devices with other eWeLink accounts. For sharing to be successful, both users must be online on eWeLink. If the account you wish to share with is not online, they will not receive the invitation message.
To share: Click "Share", input the eWeLink account (phone number or email address) you want to share with. Select the timer permissions (edit/delete/change/enable) you wish to grant. Enter a note so the other user knows who you are, then click "Next". The other account will receive an invitation message. Click "Accept" to complete the device sharing. The other user will then have access to control the device.
-
Timing
Supports a maximum of 8 enabled single/repeat/countdown timing schedules per device.
-
Set default power on status
In "Device Settings", you can set the default device status to be ON or OFF when the device powers on.
-
Scene/Smart Scene
Scenes allow you to trigger your devices on/off automatically. Scene settings are located in the upper right corner of the "Device List". You can set up scenes or smart scenes to control the device.
Users should select "Click to execute" in the condition, add different existing devices, name the scene, and save it.
-
Security mechanism
One device per owner. Other users cannot add devices that have already been added. If you wish to add your device to another account, remember to delete it from the current account first.
-
Update
The system will automatically remind you of new firmware or version updates. Please update as soon as possible.
4. Problems and solutions
Read the detailed FAQ on the Itead Smart Home Forum. If the FAQ does not help solve your problem, please submit feedback on eWeLink.
