Technical Data Compressor

Model: FRK7.5G

Sales code: 106G5663

Compressor Design Specifications

Compressor Design Details
Designation	FRK7.5G
Compressor design	220-240V/50Hz 1~, 208-230V/60Hz 1~
Oil type	Polyolester
Oil viscosity	19,2 cSt
Oil quantity	240cm³ / 8,1fl.oz
Refr. charge - tech. limit	700g / 24,7oz
Free gas volume comp.	1535cm³ / 51,9fl.oz
Weight	9,5kg / 20,9lbs
Motor protection	external
Winding resistance main	10,7Ω (at 25°C)
Winding resistance aux	17Ω (at 25°C)
Max. winding temp.	125°C / 257°F
Max. discharge temp.	130°C / 266°F
Additional note	Very good robustness against liquid intake. Ice-cube maker optimization - indirect suction intake. Special design for high refrigerant charge.
Refrigerant(s)	R134a, R513A
Displacement	5,6cm³ / 0,34cu.in
Compressors on pallet	100

Image Description: A black, compact, hermetic scroll compressor with the SECOP logo and "FRK-Series" branding visible. It has a typical industrial appearance.

General Configurations

Configuration FRK7.5G

General Configurations
Parameter	Conf. 1	Conf. 2
Motor configuration	CSIR	CSIR
Power supply (nominal)	220-240V/50Hz	208-230V/60Hz
Number of phases	1	1
Voltage range	187-254V	198-253V
Approvals	VDE, CB, UL	VDE, CB, UL
Starting torque	HST	HST
Note	Electrical equipment is included and pre-assembled to compressor.

Applications with FRK7.5G

Applications
Parameter	Conf. 1	Conf. 2
Refrigerant	R134a	R134a
Application	LBP+MBP+HBP	LBP+MBP
System cooling	fan 3m/s	fan 3m/s
Hot gas defrost	OK	OK
Long interval pull down	OK	OK

Electrical Data - Configurations with FRK7.5G

Electrical Data
Parameter	Conf. 1	Conf. 2
Starting device type	relay	relay
Run capacitor	-/-	-/-
Start capacitor	80µF	80µF
LRA (locked rotor amps / 4s/ U(N))	11,4A	-/-
RLA (rated load amps / 1s/ U(N))	1,2A	-/-A
Cut in current (U(N))	10,7A	-/-

Compressor Dimensions

Housing Dimensions

Housing Dimensions
Dimension	Value (mm)	Value (in)
A Height	182	7,17
B Height	175	6,89
C Length shell	198	7,8
D Length w. cover	238	9,37
E Width	160	6,3

Diagram Description: A diagram illustrating the compressor's housing dimensions, with labels A (Height), B Height, C (Length shell), D (Length w. cover), and E (Width), providing measurements in millimeters and inches.

Connectors

Connector Specifications
Parameter	Suction (X)	Discharge (Y)	Process (Z)
Diameter [mm] (i:inside, o:outside)	Øi 8,11-8,29	Øi 6,11-6,29	Øi 6,11-6,29
Diameter [in] (i:inside, o:outside)	Øi 0,32-0,33	Øi 0,24-0,25	Øi 0,24-0,25
Material	copper	copper	copper
Horizontal angle	±2°	35°	13°
Vertical angle	±2°	30°	40°
Position l/h/w [mm]	119/73/59	117/107/66	-88/101/71
Position l/h/w [in]	4,7/2,9/2,3	4,6/4,2/2,6	-3,5/4/2,8
Straight tube l. [mm]	14	14	14
Straight tube l. [in]	0,5	0,5	0,5

Diagram Description: A diagram showing the compressor's suction (X), discharge (Y), and process (Z) ports. It details the diameter (inside and outside), material (copper), horizontal angle, and vertical angle for each port.

Compressor Fixation

Bolt Joint

Baseplate Dimensions
Feature	[mm]	[inch]
Baseplate Bl	204	8.03
Baseplate Bw	132	5.2
Baseplate ØE	Ø 9.7	Ø 0.38
Large holes Ll	165	6.5
Large holes Lw	101.6	4
Large holes ØL	Ø 19	Ø 0.75
Small holes Sl	170	6.7
Small holes Sw	70	2.76
Small holes ØS	Ø 16	Ø 0.63

Diagram Description: A diagram illustrating the compressor's baseplate with dimensions (Bl, Bw, E, Ll, Lw, ØL, ØE, Sl, Sw) and hole specifications. It shows how the compressor is mounted using bolts, washers, and rubber grommets.

Snap-on

Diagram Description: A diagram depicting a snap-on mounting mechanism for the compressor, involving a clip, steel pin, and rubber grommet attached to the compressor base and cabinet base.

Mounting Accessories

Mounting Accessories Part Numbers
Accessory Type	Conf. 1 (one comp.)	Conf. 2 (multi pack)
Bolt joint \| M6 \| Ø16mm	118-1917	118-1918
Bolt joint \| Ø1/4" \| Ø16mm	118-1946	118-1919
Bolt joint \| Ø1/4" \| Ø19mm	118-1949	-
Snap-on \| Ø7,3 \| Ø16mm	118-1947	-

Application Notes

Provision for PE Grounding is located at the PE Stamp on the compressor.
Suction gas connector and Process connector can be switched (minor loss of cooling capacity).

Ambient/Machine Room Temperatures

Ambient temperature range: 10 - 43°C / 50 - 110°F

Machine room temperature range: 10 - 48°C / 50 - 119°F

Compressor cooling: fan 3m/s

Operation Pressure Range

Diagram Description: Two graphs illustrating the compressor's operation pressure ranges. The top graph plots condensing pressure (bar) against saturation temperature (°C/°F) for continuous and transitory operation. The bottom graph plots evaporation pressure (bar) against saturation temperature (°C/°F) for continuous and transitory operation.

Electrical Accessories / Wiring Diagram

Diagram Description: A diagram showing electrical accessories and wiring for the compressor. Components include a current relay (a5), a start capacitor (c), and covers/clamps (b, d). It illustrates the electrical connections.

Components (incl. and pre. assembl.)

Components
Component	Part Number
a5 current relay (T0089/L6-S2)	117U7070
c start capacitor (80µF, 6.3mm)	117U5001
b, d cover + clamp + screws(5VA-compl.)	103N0600

Alternative Components

Alternative Components
Component	Part Number
b, d 100x cover + clamp + screws(5VA)	103N2060
b, d cover + clamp + screws(5VA) in bag	103N1060

Optimization + Standard Conditions

This section details performance metrics under various operating conditions, including evaporating and condensing pressures, return gas temperature, and liquid temperature. Data is provided for Configuration 1 (220-240V/50Hz).

Optimization + Standard Conditions (Conf. 1)
pe [°C/°F]	pc [°C/°F]	RGT [°C/°F]	Tliq [°C/°F]	Cooling capacity [W]	Cooling capacity [Btu/h]	Cooling capacity [kcal/h]	COP [W/W]	EER [Btu/Wh]	EER [kcal/Wh]	P1 [W]	I [A]	Ref. mass flow m [kg/h]	Application
-23 / -10	54 / 130	32 / 90	32 / 90	151,7	518	130,6	1,28	4,38	1,10	118,3	1,06	2,95	ASHRAE LBP
-7 / 20	54 / 130	35 / 95	46 / 115	325,4	1111	280,1	1,86	6,37	1,60	174,6	1,21	7,10	ASHRAE MBP
7,2 / 45	54 / 130	35 / 95	46 / 115	583,4	1992	502,1	2,65	9,06	2,28	219,9	1,36	12,94	ASHRAE HBP
-35 / -31	40 / 104	20 / 68	40 / 104	79,0	270	68,0	0,96	3,28	0,83	82,2	0,99	1,73	EN12900 LBP
-10 / 14	45 / 113	20 / 68	45 / 113	281,1	960	241,9	1,87	6,37	1,61	150,6	1,14	6,58	EN12900 MBP
5 / 41	50 / 122	20 / 68	50 / 122	497,7	1700	428,3	2,45	8,37	2,11	203,1	1,30	12,54	EN12900 HBP

Performance Tables

These tables provide detailed performance data, including cooling capacity, COP, EER, power consumption, current consumption, and refrigerant mass flow, across different pressure and temperature conditions for Configuration 1 (220-240V/50Hz).

Performance Tables (Conf. 1)
pe [°C/°F]	pc [°C/°F]	Cooling capacity [W]	Cooling capacity [Btu/h]	Cooling capacity [kcal/h]	COP [W/W]	EER [Btu/Wh]	EER [kcal/Wh]	P1 [W]	I [A]	m [kg/h]
-35 / -31	-25 / -13	74,4	254	64,0	0,91	3,11	0,78	81,7	0,99	1,60
	-15 / 5	131,0	447	112,7	1,20	4,08	1,03	109,5	1,04	2,84
	-15 / 5	227,1	776	195,5	1,66	5,66	1,43	136,9	1,11	4,95
-10 / 14	291,6	996	251,0	1,94	6,61	1,67	150,6	1,14	6,38
0 / 32	456,4	1559	392,8	2,56	8,75	2,20	178,2	1,22	10,09
5 / 41	558,1	1906	480,3	2,90	9,92	2,50	192,1	1,27	12,42
15 / 59	802,8	2742	690,9	3,64	12,43	3,13	220,5	1,37	18,18
-35 / -31	-25 / -13	61,0	208	52,5	0,80	2,72	0,69	76,6	0,98	1,45
	-15 / 5	111,2	380	95,7	0,99	3,37	0,85	112,6	1,05	2,66
	-15 / 5	195,0	666	167,8	1,32	4,52	1,14	147,2	1,13	4,69
-10 / 14	250,9	857	216,0	1,53	5,22	1,32	164,1	1,18	6,07
0 / 32	394,2	1346	339,3	2,00	6,82	1,72	197,4	1,28	9,64
5 / 41	482,7	1649	415,5	2,26	7,71	1,94	213,9	1,34	11,90
15 / 59	696,7	2379	599,6	2,83	9,65	2,43	246,6	1,46	17,50

Optimization + Standard Conditions (Conf. 2)

This section details performance metrics under various operating conditions for Configuration 2 (208-230V/60Hz).

Optimization + Standard Conditions (Conf. 2)
pe [°C/°F]	pc [°C/°F]	RGT [°C/°F]	Tliq [°C/°F]	Cooling capacity [W]	Cooling capacity [Btu/h]	Cooling capacity [kcal/h]	COP [W/W]	EER [Btu/Wh]	EER [kcal/Wh]	P1 [W]	I [A]	Ref. mass flow m [kg/h]	Application
-23 / -10	54 / 130	32 / 90	32 / 90	187,0	639	160,9	1,34	4,56	1,15	140,0	1,18	3,63	ASHRAE LBP
-7 / 20	54 / 130	35 / 95	46 / 115	384,7	1314	331,1	1,89	6,45	1,63	203,7	1,35	8,39	ASHRAE MBP
7,2 / 45	54 / 130	35 / 95	46 / 115	681,9	2329	586,8	2,65	9,04	2,28	257,7	1,53	15,13	ASHRAE HBP
-35 / -31	40 / 104	20 / 68	40 / 104	96,1	328	82,7	1,05	3,58	0,90	91,6	1,08	2,11	EN12900 LBP
-10 / 14	45 / 113	20 / 68	45 / 113	330,6	1129	284,6	1,86	6,34	1,60	178,1	1,27	7,74	EN12900 MBP
5 / 41	50 / 122	20 / 68	50 / 122	580,4	1982	499,5	2,40	8,20	2,07	241,6	1,47	14,62	EN12900 HBP

Performance Tables (Conf. 2)

Performance Tables (Conf. 2)
pe [°C/°F]	pc [°C/°F]	Cooling capacity [W]	Cooling capacity [Btu/h]	Cooling capacity [kcal/h]	COP [W/W]	EER [Btu/Wh]	EER [kcal/Wh]	P1 [W]	I [A]	m [kg/h]
-35 / -31	-25 / -13	89,5	306	77,0	0,99	3,38	0,85	90,5	1,08	1,93
	-15 / 5	160,4	548	138,0	1,26	4,32	1,09	126,9	1,15	3,47
	-15 / 5	270,2	923	232,5	1,68	5,73	1,44	161,1	1,23	5,89
-10 / 14	343,0	1172	295,2	1,93	6,58	1,66	178,1	1,27	7,51
0 / 32	531,1	1814	457,1	2,49	8,52	2,15	212,9	1,38	11,75
5 / 41	649,0	2217	558,6	2,81	9,58	2,41	231,3	1,44	14,45
15 / 59	939,2	3208	808,3	3,46	11,82	2,98	271,3	1,57	21,27
-35 / -31	-25 / -13	70,0	239	60,2	0,76	2,60	0,65	91,9	1,08	1,67
	-15 / 5	137,4	469	118,2	1,03	3,50	0,88	134,0	1,16	3,28
	-15 / 5	235,2	803	202,4	1,36	4,65	1,17	172,9	1,26	5,66
-10 / 14	298,8	1021	257,2	1,56	5,32	1,34	191,8	1,31	7,23
0 / 32	462,1	1578	397,7	2,01	6,86	1,73	229,9	1,43	11,30
5 / 41	564,5	1928	485,8	2,26	7,72	1,95	249,6	1,50	13,91
15 / 59	817,1	2790	703,2	2,80	9,57	2,41	291,4	1,65	20,52

	SECOP KLE4.8GFTX Compressor Technical Data and Specifications Comprehensive technical data sheet for the SECOP KLE4.8GFTX compressor. Details include compressor design specifications, general configurations (Conf. 1 & 2), application suitability (LBP, MBP, HBP), electrical data, dimensions, mounting accessories, ambient temperature limits, operation pressure ranges, and detailed performance data under various standard conditions (ASHRAE, EN12900) for both 220-240V/50Hz and 208-230V/60Hz operation. Features R134a and R513A refrigerants.
	Secop KLE4.0GFTX Compressor Technical Data Sheet Comprehensive technical data, specifications, and performance tables for the Secop KLE4.0GFTX compressor, including details on configurations, dimensions, electrical data, and operating pressure ranges for R134a refrigerant.
	SECOP KLE4.8GFTX Compressor Technical Data Sheet Detailed technical specifications, dimensions, electrical data, and performance tables for the SECOP KLE4.8GFTX compressor, designed for R134a refrigerant, covering configurations for 220-240V/50Hz and 208-230V/60Hz.
	SECOP FRK7.5G Compressor Technical Data Detailed technical specifications, dimensions, electrical data, and performance tables for the SECOP FRK7.5G compressor, designed for various refrigeration applications using R134a refrigerant.
	SECOP KLE7.7GFTX Compressor Technical Data Sheet Detailed technical specifications, performance data, dimensions, and electrical information for the SECOP KLE7.7GFTX compressor, including configurations for R134a and R513A refrigerants.
	Secop FRK8.5G Compressor Technical Data and Specifications Detailed technical specifications, performance data, dimensions, and electrical information for the Secop FRK8.5G compressor, available in 220-240V 50Hz and 208-230V 60Hz configurations.
	SECOP KLE8.6GFTX Compressor Technical Data Sheet Detailed technical specifications, configurations, performance data, and dimensions for the SECOP KLE8.6GFTX compressor, supporting R134a and R513A refrigerants for various voltage and frequency combinations.
	SECOP FRK6G Compressor Technical Data Sheet Comprehensive technical data for the SECOP FRK6G compressor, including specifications, configurations, dimensions, electrical data, performance tables, and application notes for R134a refrigerant.