Manuals+

Secop Compressor Technical Data

Model: KLE4.0GFTX

General Information

Designation: KLE4.0GFTX

Sales Code: 106G5418

Configurations: 220-240V/50Hz 1~ and 208-230V/60Hz 1~

Compressor Design

Oil Type: Polyolester

Oil Viscosity: 19,2 cSt

Oil Quantity: 240 cm³ / 8,1 fl.oz

Refrigerant Charge (Tech. Limit): 250g / 8,8oz

Free Gas Volume (Comp.): 1560 cm³ / 52,7 fl.oz

Weight: 8,9kg / 19,6lbs

Motor Protection: External

Winding Resistance (Main): 13,1 Ω (at 25°C)

Winding Resistance (Aux): 25,3 Ω (at 25°C)

Max. Winding Temp.: 125°C / 257°F

Max. Discharge Temp.: 130°C / 266°F

Additional Note: Good robustness against liquid intake. Ice-cube maker optimization - indirect suction intake.

A SECOP KL-Series compressor unit is depicted.

General Configurations

Feature Conf. 1 (220-240V/50Hz) Conf. 2 (208-230V/60Hz)
Motor Configuration CSIR CSIR
Power Supply (Nominal) 220-240V/50Hz 208-230V/60Hz
Number of Phases 1 1
Voltage Range 187-254V 198-253V
Approvals VDE, CB, UL VDE, CB, UL
Starting Torque HST HST
Note Electrical equipment is included and pre-assembled to compressor.

Applications

Feature Conf. 1 Conf. 2
Refrigerant R134a R134a
Application LBP+MBP+HBP LBP+MBP
System Cooling Static Static
Hot Gas Defrost OK OK
Long Interval Pull Down OK OK

Electrical Data

Feature Conf. 1 Conf. 2
Starting Device Type Relay Relay
Run Capacitor -/- -/-
Start Capacitor 80µF 80µF
LRA (Locked Rotor Amps / 4s/ U(N)) 10,5A 10,5A
RLA (Rated Load Amps / 1s/ U(N)) 1A 1A
Cut In Current (U(N)) 10,2A 10,2A

Compressor Dimensions

Housing Dimensions:

Diagram shows compressor dimensions labeled A through E.

Connectors

Feature Connector Type
Suction (X) Discharge (Y) Process (Z)
Diameter [mm] (i:inside, o:outside) øi 8,11-8,29 øi 6,11-6,29 øi 6,11-6,29
Diameter [in] (i:inside, o:outside) øi 0,32-0,33 øi 0,24-0,25 øi 0,24-0,25
Material Copper Copper Copper
Horizontal Angle +2° 35° 0°
Vertical Angle +2° 30° 40°
Position [mm] (l/h/w) 119/73/59 114/107/63 -87/101/71
Position [in] (l/h/w) 4,7/2,9/2,3 4,5/4,2/2,5 -3,4/4/2,8
Straight Tube Length [mm] 14 14 14
Straight Tube Length [in] 0,5 0,5 0,5

Diagram illustrates connector positions (X, Y, Z) and angles relative to the compressor body (A, B, C, D, E, W).

Compressor Fixation and Mounting Accessories

Compressor Fixation:

The compressor can be fixed using bolt joints or snap-on mechanisms.

Mounting Accessories (Multi Pack):

Baseplate Dimensions:

Diagrams show bolt joint fixation with washer and rubber grommet, and snap-on fixation with clip and steel pin.

Application Notes

Ambient and Machine Room Temperatures

Ambient Temperature Range: 10 - 43°C / 50 - 110°F

Machine Room Temperature Range: 10 - 48°C / 50 - 119°F

Compressor Cooling: Static

Operation Pressure Range

Graph displays the operation pressure range for the compressor. The Y-axis shows condensing pressure (in bara and saturated temperature °C/°F), and the X-axis shows evaporation pressure (in bara and saturated temperature °C/°F). Two curves represent continuous and transitory operation.

Electrical Accessories / Wiring Diagram

Diagram shows electrical accessories and wiring for the compressor. Key components include:

Alternative components are also listed:

Optimization and Standard Conditions

Performance data is provided for R134a refrigerant under various conditions (evaporating and condensing pressures, return gas temperature, liquid temperature) for both 220-240V/50Hz and 208-230V/60Hz configurations.

Configuration 1: 220-240V/50Hz

Optimization + Standard Conditions
Conditions Cooling Capacity COP Power Consumption Current [A] Ref. Mass Flow [kg/h] Application Standard
[W] [Btu/h] [kcal/h] [W/W] [Btu/Wh] [kcal/Wh] [W] P1
Evaporating [°C/°F]
Condensing [°C/°F]
RGT [°C/°F]
Tliq [°C/°F]		 -23 / -10
54 / 130
32 / 90
32 / 90		 101,4 346 87,3 1,14 3,90 0,98 88,8 1,15 1,97 ASHRAE LBP
-7 / 20
54 / 130
35 / 95
46 / 115		 221,7 757 190,8 1,77 6,03 1,52 125,5 1,23 4,84 ASHRAE MBP
7,2 / 45
54 / 130
35 / 95
46 / 115		 398,3 1360 342,8 2,58 8,81 2,22 154,4 1,31 8,84 ASHRAE HBP
-35 / -31
40 / 104
20 / 68
40 / 104		 46,0 157 39,6 0,72 2,47 0,62 63,5 1,10 1,01 EN12900 LBP
-10 / 14
45 / 113
20 / 68
45 / 113		 191,3 653 164,6 1,74 5,93 1,49 110,1 1,20 4,48 EN12900 MBP
5 / 41
50 / 122
20 / 68
50 / 122		 339,4 1159 292,1 2,36 8,07 2,03 143,6 1,28 8,55 EN12900 HBP
Performance Tables
Conditions Cooling Capacity COP Power Consumption Current [A] Ref. Mass Flow [kg/h]
[W] [Btu/h] [kcal/h] [W/W] [Btu/Wh] [kcal/Wh] [W] P1
Cond. Pressure [°C/°F]
pc= 45/113
Return Gas Temp. [°C/°F]
RGT= 32/90
Liquid Temp. [°C/°F]
Tliq= 45/113		 -35 / -31
-25 / -13
-15 / 5
-10 / 14
0 / 32
5 / 41
15 / 59		 43,4
86,8
154,2
198,5
310,9
380,4
548,6		 148
296
527
678
1062
1299
1874		 37,4
74,7
132,7
170,8
267,6
327,4
472,1		 0,69
1,05
1,52
1,80
2,43
2,78
3,54		 2,34
3,57
5,20
6,15
8,31
9,51
12,09		 0,59
0,90
1,31
1,55
2,09
2,40
3,05		 63,3
82,9
101,2
110,1
127,7
136,6
154,9		 1,10
1,14
1,18
1,20
1,24
1,26
1,31		 0,94
1,88
3,36
4,34
6,88
8,47
12,43
Cond. Pressure [°C/°F]
pc= 55/131
Return Gas Temp. [°C/°F]
RGT= 32/90
Liquid Temp. [°C/°F]
Tliq= 55/131		 -35 / -31
-25 / -13
-15 / 5
-10 / 14
0 / 32
5 / 41
15 / 59		 35,4
73,8
132,4
170,8
268,7
329,4
477,3		 121
252
452
583
918
1125
1630		 30,5
63,5
114,0
147,0
231,3
283,5
410,8		 0,59
0,87
1,23
1,44
1,92
2,19
2,78		 2,01
2,97
4,19
4,91
6,55
7,48
9,50		 0,51
0,75
1,06
1,24
1,65
1,88
2,40		 60,0
84,9
107,8
118,8
140,0
150,5
171,5		 1,10
1,15
1,19
1,22
1,27
1,30
1,36		 0,84
1,76
3,19
4,13
6,57
8,12
11,99

Configuration 2: 208-230V/60Hz

Optimization + Standard Conditions
Conditions Cooling Capacity COP Power Consumption Current [A] Ref. Mass Flow [kg/h] Application Standard
[W] [Btu/h] [kcal/h] [W/W] [Btu/Wh] [kcal/Wh] [W] P1
Evaporating [°C/°F]
Condensing [°C/°F]
RGT [°C/°F]
Tliq [°C/°F]		 -23 / -10
54 / 130
32 / 90
32 / 90		 122,9 420 105,8 1,20 4,10 1,03 102,4 1,10 2,39 ASHRAE LBP
-7 / 20
54 / 130
35 / 95
46 / 115		 261,5 893 225,1 1,81 6,20 1,56 144,1 1,19 5,71 ASHRAE MBP
7,2 / 45
54 / 130
35 / 95
46 / 115		 465,1 1589 400,3 2,58 8,82 2,22 180,1 1,28 10,32 ASHRAE HBP
-35 / -31
40 / 104
20 / 68
40 / 104		 55,1 188 47,4 0,76 2,59 0,65 72,7 1,06 1,21 EN12900 LBP
-10 / 14
45 / 113
20 / 68
45 / 113		 224,4 767 193,2 1,76 6,00 1,51 127,8 1,15 5,25 EN12900 MBP
5 / 41
50 / 122
20 / 68
50 / 122		 395,7 1351 340,6 2,34 7,98 2,01 169,3 1,25 9,97 EN12900 HBP
Performance Tables
Conditions Cooling Capacity COP Power Consumption Current [A] Ref. Mass Flow [kg/h]
[W] [Btu/h] [kcal/h] [W/W] [Btu/Wh] [kcal/Wh] [W] P1
Cond. Pressure [°C/°F]
pc= 45/113
Return Gas Temp. [°C/°F]
RGT= 32/90
Liquid Temp. [°C/°F]
Tliq= 45/113		 -35 / -31
-25 / -13
-15 / 5
-10 / 14
0 / 32
5 / 41
15 / 59		 50,9
104,5
182,4
232,9
361,9
442,5
640,8		 174
357
623
795
1236
1511
2188		 43,8
90,0
157,0
200,4
311,5
380,8
551,5		 0,71
1,10
1,56
1,82
2,40
2,72
3,40		 2,42
3,77
5,33
6,22
8,21
9,29
11,60		 0,61
0,95
1,34
1,57
2,07
2,34
2,92		 71,8
94,7
116,8
127,8
150,6
162,6
188,7		 1,06
1,09
1,13
1,15
1,20
1,23
1,30		 1,10
2,26
3,98
5,10
8,00
9,85
14,51
Cond. Pressure [°C/°F]
pc= 55/131
Return Gas Temp. [°C/°F]
RGT= 32/90
Liquid Temp. [°C/°F]
Tliq= 55/131		 -35 / -31
-25 / -13
-15 / 5
-10 / 14
0 / 32
5 / 41
15 / 59		 38,9
89,4
158,6
202,7
314,9
385,0
558,0		 133
305
542
692
1075
1315
1906		 33,5
77,0
136,5
174,5
271,0
331,3
480,3		 0,54
0,91
1,28
1,49
1,95
2,20
2,76		 1,85
3,10
4,38
5,08
6,66
7,53
9,41		 0,47
0,78
1,10
1,28
1,68
1,90
2,37		 71,7
98,4
123,7
136,2
161,6
174,7
202,5		 1,06
1,10
1,14
1,17
1,23
1,26
1,34		 0,93
2,14
3,82
4,90
7,70
9,49
14,02

PDF preview unavailable. Download the PDF instead.

kle40gftx 106g5418 r134a 220v 208v 50hz 60hz 08-2025 ds Microsoft Excel für Microsoft 365

Related Documents

Preview SECOP KLE4.8GFTX Compressor Technical Data and Specifications
Comprehensive technical data sheet for the SECOP KLE4.8GFTX compressor. Details include compressor design specifications, general configurations (Conf. 1 & 2), application suitability (LBP, MBP, HBP), electrical data, dimensions, mounting accessories, ambient temperature limits, operation pressure ranges, and detailed performance data under various standard conditions (ASHRAE, EN12900) for both 220-240V/50Hz and 208-230V/60Hz operation. Features R134a and R513A refrigerants.
Preview SECOP KLE4.8GFTX Compressor Technical Data Sheet
Detailed technical specifications, dimensions, electrical data, and performance tables for the SECOP KLE4.8GFTX compressor, designed for R134a refrigerant, covering configurations for 220-240V/50Hz and 208-230V/60Hz.
Preview SECOP KLE8.6GFTX Compressor Technical Data Sheet
Detailed technical specifications, configurations, performance data, and dimensions for the SECOP KLE8.6GFTX compressor, supporting R134a and R513A refrigerants for various voltage and frequency combinations.
Preview Secop FRK8.5G Compressor Technical Data and Specifications
Detailed technical specifications, performance data, dimensions, and electrical information for the Secop FRK8.5G compressor, available in 220-240V 50Hz and 208-230V 60Hz configurations.
Preview SECOP FRK6G Compressor Technical Data Sheet
Detailed technical specifications, dimensions, electrical data, and performance tables for the SECOP FRK6G compressor, designed for R134a refrigerant and operating on 220-240V/50Hz and 208-230V/60Hz power supplies.
Preview SECOP FRK7.5G Compressor Technical Data Sheet - Specifications and Performance
Detailed technical specifications, dimensions, electrical data, operating conditions, and performance tables for the SECOP FRK7.5G compressor. Includes data for 220-240V/50Hz and 208-230V/60Hz configurations.
Preview SECOP KLE4.0GFMX Compressor Technical Data Sheet
Comprehensive technical specifications for the SECOP KLE4.0GFMX compressor, detailing configurations, dimensions, operating conditions, and performance data for R134a and R513A refrigerants. Includes electrical characteristics and mounting information.
Preview SECOP KLE4.0GFTX Compressor Technical Data
Detailed technical specifications, dimensions, electrical data, and performance tables for the SECOP KLE4.0GFTX compressor, designed for R134a refrigerant and operating on 220-240V/50Hz and 208-230V/60Hz power supplies.