PowerA FUSION Pro Wireless Controller

Warranty and Support

2-Year Limited Warranty. Visit PowerA.com/Support for details.

Manufacturer: BDA LLC., 15525 Woodinville-Redmond Rd NE, Woodinville, WA 98072

Package Contents

• FUSION Pro Wireless Controller
• Pro Pack (with four removable paddles)
• Protective case
• 9.8ft (3m) braided USB cable* with snap-lock, inline release and cable wrap
• Pro Pack controller cover
• One tall concave analog stick
• One tall convex analog stick
• One saddle thumbstick adapter
• Two swappable anti-friction rings
• User Manual

*NOTE: The included USB cable is a dedicated (proprietary) USB cable for this FUSION Pro Wireless Controller.

Controller Overview - Front

Front View Labels:

• L1 BUTTON/BUMPER
• SHARE BUTTON
• DIRECTIONAL BUTTONS
• LIGHT BAR LED
• LEFT STICK/L3 BUTTON
• TOUCH PAD/TOUCH PAD BUTTON
• R1 BUTTON/BUMPER
• OPTIONS BUTTON
• ΔΟΧΟ BUTTONS
• SPEAKER
• PS BUTTON
• RIGHT STICK/R3 BUTTON
• PRO PACK PROGRAM LED

Controller Overview - Back

Back View Labels:

• R2 BUTTON/TRIGGER
• USB PORT
• PROGRAM BUTTON
• L2 BUTTON/TRIGGER
• RIGHT 3-WAY TRIGGER LOCK
• MAPPABLE PRO PACK
• WIRELESS/WIRED SWITCH
• LEFT 3-WAY TRIGGER LOCK
• STEREO HEADSET PORT
• RUBBERIZED GRIPS

Thumbstick / Anti-Friction Ring Replacement

Follow these steps to replace thumbsticks or anti-friction rings:

1. Gently pull the existing thumbstick upwards to remove it.
2. Carefully remove the old anti-friction ring.
3. Align the new anti-friction ring with the base of the thumbstick and press down.
4. Align the thumbstick with the new ring and press down to secure it.

Mapping Pro Pack Paddles

Map the Pro Pack paddles to your desired button inputs:

1. Press and hold the Program button (1), then press the desired paddle button (2, 3, or 4) to enter mapping mode.
2. Press the button on the controller you wish to map to the paddle (e.g., L1, R1, X, O).
3. The Pro Pack Program LED will flash to confirm the mapping.
4. Repeat for the remaining Pro Pack paddles. Paddle assignments are saved in memory.

Resetting the Pro Pack Paddles

To reset the Pro Pack paddles to their default settings:

1. Press and hold the Program button (1) and the Share button (2) simultaneously for 3 seconds.
2. Release both buttons. The Pro Pack Program LED will turn off, indicating the reset is complete.

3-Way Trigger Lock Adjustment

Adjust the trigger lock for different gaming styles:

• T1: Full trigger travel.
• T2: Short trigger travel.
• T3: Locked position (trigger disabled).

Pro Pack Installation/Removal

Install or remove the Pro Pack accessory:

1. Align the Pro Pack with the back of the controller.
2. Press the Pro Pack firmly until it clicks into place.
3. To remove, gently pull the Pro Pack away from the controller.

NOTE: Store all unused components in the protective case when not in use.

Setup

Rechargeable 1000 mAh Internal Battery

The controller is factory-charged, but if the Light Bar LED flashes red, connect the USB cable to charge before initial pairing.

Battery Maintenance Note: Charge the controller at least once every 45-60 days to maintain battery health. Battery capacity may decrease over time with repeated charging.

PS4™ USB Wired Mode

1. Slide the Mode Switch on the back of the controller to the "PS4™ USB" position.
2. Connect the USB cable to a PS4™ USB port and the controller's USB port. If the PS4™ is off, press the PS button to power it on. The controller's LED Connection Indicator will illuminate.
3. Refer to the PS4™ user manual for player and controller assignment.
4. To disconnect, squeeze the side buttons near the USB port and pull gently.

PS4™ Bluetooth Wireless Mode

1. Slide the Mode Switch on the back of the controller to the "PS4™ BT" position.
2. Press and hold the "PS" button and "SHARE" button simultaneously for 3 seconds until the LED flashes rapidly.
3. On the PS4™ console, navigate to Settings > Devices > Bluetooth Devices. Use the official controller to select "YES" when prompted to pair the "PS4™ FUSION Pro".
4. Press the PS button on the FUSION Pro Controller to confirm.

PC USB Wired Mode

1. Slide the Mode Switch on the back of the controller to the "PC USB" position.
2. Connect the USB cable to a PC USB port and the controller's USB port. The controller's LED Connection Indicator will illuminate.
3. Follow PC software or game service instructions for controller setup or button mapping.

Understanding LED Indicators

The Light Bar LED functions similarly to the Light Bar on a DualShock 4 controller. The Pro Pack Program LED flashes during paddle programming.

Troubleshooting

For the latest FAQs, visit PowerA.com/Support/

Problem: Controller will not connect to game console.

• Wired Mode Solution: Confirm the USB cable is properly connected to the console and the inline release cable is properly connected.
• Wireless Mode Solution: Ensure the controller is in "BT Mode". Check pairing in Settings > Devices > Bluetooth Devices on your console.

Problem: Pro Pack paddles are not functioning properly.

• Solution: Ensure the Pro Pack is securely installed on the controller. Verify Pro Pack paddles are correctly installed. Refer to the "Mapping Pro Pack Paddles" section.

For additional troubleshooting, consult your PlayStation®4 user guide.

Warnings and Compliance

Battery Warning

• Do not attempt to replace the rechargeable battery yourself.
• Dispose of batteries according to local environmental laws.
• ⚠️ Do not expose batteries to extreme temperatures.
• ⚠️ Avoid static electricity when handling the battery.
• If battery fluid contacts eyes, rinse immediately with water and seek medical attention.
• If the battery shows abnormal signs (odor, heat), remove it from the charger and place it in a metal box.
• Discarded batteries can cause fire; do not heat or incinerate.

Motion Warning

Playing video games can cause physical strain. Follow these guidelines to prevent discomfort:

• Take a 10-15 minute break every hour.
• Stop playing if you experience fatigue or pain. Rest for several hours.
• Consult a doctor if symptoms persist.

Customer Service

For support, visit PowerA.com/Support.

Manufactured By

Bensussen Deutsch & Associates, LLC. (BDA, LLC.) 15525 Woodinville-Redmond Rd. NE Woodinville, WA 98072. BDAINC.com | POWERA.com

Additional Legal Information

PowerA, the PowerA logo, and the FUSION by PowerA logo are trademarks of Bensussen Deutsch and Associates, LLC. Manufactured and distributed under license by Sony Interactive Entertainment LLC. "PlayStation" and "DUALSHOCK" are registered trademarks of Sony Interactive Entertainment Inc. All other trademarks are property of their respective owners. Made in China.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits per FCC Rules, designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, try measures like reorienting the antenna, increasing separation, or connecting to a different circuit.

CAN ICES-3(B)/NMB-3(B)

This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) no interference, and (2) acceptance of any interference.

Australian Warranty

This product comes with guarantees that cannot be excluded under the Australian Consumer Law. For major failures, you are entitled to a replacement or refund. If purchased in Australia or New Zealand, a one-year warranty from the date of purchase applies. All warranty claims must be facilitated through the retailer.

AU Wholesale Distributor

Bluemoouth.com.au, Level 2, 2 Darling Street South Yarra, Australia VIC 3141. Email: support@bluemouth.com.au | +61 (3) 9867 2666

Regional Compliance Symbols

• WEEE: Symbol indicates proper battery disposal outside of household waste per local regulations.
• CE: European Conformity mark indicating compliance with health, safety, and environmental protection standards for the European Economic Area.
• Regulatory Compliance Mark: Visible indication of compliance with ACMA regulatory arrangements for electrical safety and EMC.