Installing Your Mini PC to a VESA Mount-Compatible Device
First Edition, October 2021
Installation Instructions
NOTE: A 24-inch or larger size monitor on the device is recommended for installation.
To install your Mini PC to a VESA mount-compatible device:
- Place your Mini PC upside down on a flat and stable surface.
- Attach the bundled two (2) 12mm screws into the screw holes at the bottom of your Mini PC.
WARNING! Do not overtighten the screws as it may cause damage to your Mini PC.
- Remove the screw hole covers at the back of your VESA mount-compatible device, if any.
- With the arrow on the VESA mounting plate pointing upward, align its screw holes to the screw holes of the VESA mount-compatible device.
- Secure the VESA mounting plate to the VESA mount-compatible device using the bundled screws.
WARNING! Do not overtighten the screws as it may cause damage to your VESA mount-compatible device.
- Pull the metal lock on the VESA mounting plate outwards.
- Position the Mini PC and insert the screws attached on the Mini PC to the mounting holes of the VESA mounting plate, then gently push the Mini PC down to secure it in place.
- Push the metal lock back towards the Mini PC then secure it using a screw.
Diagram Description: The document includes diagrams illustrating the steps. These show the Mini PC, the VESA mounting plate with screw holes and a locking mechanism, and the screws used for attachment. The diagrams indicate the orientation of the Mini PC (upside down), the placement of screws, and the direction of the arrow on the VESA plate.
