SNZB-P(EN) Zigbee Motion Sensor
Introduction
The SNZB-03P is a low-energy motion sensor based on the Zigbee 3.0 protocol, utilizing infrared sensing technology to detect moving objects in real-time within its environment. It supports smart scenes, connecting with other smart devices to facilitate functions like automatic lighting when someone enters a room and turning off lights when the area is empty, ideal for hallways and corridors. It can also be used for security purposes, such as detecting unauthorized entry. It can trigger a camera for video recording, activate a sound alarm via a gateway, and send app notifications to alert you, among other functions.
- ? Motion Detection
- ⚡ Fast Detection
- ☀️ Light Sensing
- ? 3-Year Battery Life
Device Overview
The device features a PIR motion sensor, a button, a magnetic base, and an LED indicator.
LED Indicator Status
| LED Indicator Status | Status Instruction |
| Slow blink for 180 seconds | First power on / Press and hold button for 5s to enter pairing mode |
| Hold for 3s and then hold | Pairing successful |
| End of slow blink and turn off | Distribution failure/timeout |
| Blink once quickly | Not added to gateway and short press button |
| Blink twice quickly | Added to gateway and online, and short press button |
| Slow blink for 30 seconds | Abnormal communication |
*Functional characteristics depend on Zigbee gateway functionality.
*The device is suitable for mounting at heights of 2 m only.
Specifications
| Model | SNZB-03P |
| MCU | EFR32MG22 |
| Input | CR2477 (3V) |
| Color | White |
| Product Dimension | 44 x 44 x 65 mm |
| Net Weight | 54 g |
| Shell Material | PC |
| Wireless Connection | Zigbee 3.0 IEEE802.15.4 |
| Pairing Time | 180s |
| Communication Distance | 30m (indoor environment) |
| Applicable Place | Indoor |
| Detection Angle | 110° |
| Detection Distance | 6m |
| Operating Temperature | -10 °C ~ 60 °C |
| Operating Humidity | 5-95% RH, non-condensing |
| Operating Altitude | Less than 5000 m |
| Certifications | CE/FCC/ISED/ROHS |
| Executive Standard | EN IEC 62368-1 |
Pairing Instructions
Download the eWeLink app and add the SONOFF Zigbee bridge. Please download the 'eWeLink' app from the Google Play Store or Apple App Store.
- Twist to open the sensor.
- Use a coin or other tool to unscrew the battery cover.
- Remove the battery isolation sheet to power on the device.
- In the eWeLink app, navigate to 'My Home', tap '+', and select 'Scan'.
- Scan the QR code on the device.
- Select 'Add Device'.
- Press and hold the button for 5 seconds.
- The LED indicator will blink slowly for 180 seconds.
- Select your Zigbee bridge (e.g., ZB Bridge).
- Wait for the pairing to complete.
Compatible Hubs
SONOFF Hubs: SONOFF ZBBridge, ZBBridge-P, NPanel PRO, AIBridge, ZBDongel-P, ZBDongel-E
Third-Party Compatible Hub Models:
- Amazon Hub Models: Echo Plus 2nd Gen, Echo Show 2nd Gen, Echo 4th Gen
- SmartThings Hub Models: SmartThings hub V3, AeoTec Smart Home Hub V3
Other gateways supporting the ZigBee3.0 wireless protocol are also compatible. Detailed information is subject to the final product.
Effective Communication Distance Verification
Install the device in the desired location and then press the pairing button on the device. The LED indicator will blink twice, indicating that the device and the gateway (router or hub) on the same Zigbee network are within effective communication distance.
Installation
The sensor can be installed in multiple ways:
- Placement on a Flat Surface: Position the sensor on a table or shelf.
- Magnetic Mounting: Attach to a metal surface using the magnetic base.
- Adhesive Mounting: Stick to the wall using the included 3M adhesive tape.
- Screw Mounting: Secure to the wall using screws with the provided base.
Detection Zone
The sensor has a detection range of approximately 6 meters and a detection angle of approximately 110 degrees.
Regulatory Information
FCC Warnings
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
[FCC Logo] This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
ISED Warnings (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian standard ICES-003(B). This device complies with Industry Canada’s RSS-247. Operation is subject to the condition that this device does not cause harmful interference.
French Translation: L'émetteur/récepteur exempté de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio. L'exploitation est autorisée aux deux conditions suivantes: (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique de la Classe B est conforme à la norme NMB-003(B) au Canada. Le fonctionnement est soumis à la condition que cet appareil ne provoque pas d'interférences nuisibles.
ISED Radiation Exposure Statement
This device complies with ISED radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
French Translation: Cet équipement est conforme aux limites d'exposition aux rayonnements de la ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et fonctionner à au moins 20 cm de distance d'un radiateur ou de votre corps. Cet émetteur ne doit pas être co-localisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur.
SAR Warnings
Under normal conditions of use, this device should be kept at a minimum distance of 20 cm between the antenna and the user's body.
French Translation: Dans des conditions normales d'utilisation, cet équipement doit être maintenu à une distance d'au moins 20 cm entre l'antenne et le corps de l'utilisateur.
EU Declaration of Conformity
Shenzhen Sonoff Technologies Co., Ltd hereby declares that the radio equipment type SNZB-03P is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/
CE Frequency Information
Operating Frequency Range: Zigbee: 2405-2480 MHz
RF Output Power: Zigbee: 10dBm
WEEE Information
Information on Disposal and Recycling of WEEE
All products marked with this symbol ♻️ are waste electrical and electronic equipment (WEEE according to Directive 2012/19/EU) and should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Proper disposal and recycling will help prevent potential negative consequences for the environment and human health. Please contact the installer or local authorities for more information on the location and terms of such collection points.
Battery Warning
⚠️ Do not ingest battery, risk of chemical burn.
This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Replacing the battery with an incorrect type may compromise protection (e.g., in the case of certain types of lithium batteries).
Disposing of a battery in a fire or hot oven, or mechanically crushing or cutting a battery, may result in an explosion.
Leaving a battery in an extremely high temperature environment may result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Manufacturer Information
Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
Postal Code: 518000
Website: sonoff.tech
Service Email: support@itead.cc
Made in China
[CE Logo] [FCC Logo]
