SONOFF SNZB-03P Zigbee Motion Sensor

Introduction

SNZB-03P is a low-power Zigbee 3.0 protocol-based motion sensor that utilizes infrared sensing technology to detect moving objects in real-time within its environment. It supports smart scenes linking with other smart devices, making it easy to achieve functions like automatic lighting when someone enters a room and turning off lights when the area is vacant, perfect for hallways and corridors. It can also be used for security purposes such as detecting unauthorized entry. It can trigger a camera to record a video, activate a sound alarm through the gateway, and send app notifications to alert you, among other capabilities.

• Motion Detection ?
• Quick Detection ?
• Light sensing ?
• 3-year battery life ?

Device Overview

The device features:

• 1. Motion sensor ?️: The infrared sensor for detecting movement.
• 2. Button ?: Used for pairing and status checks.
• 3. Magnetic base ?: For mounting the sensor.
• 4. LED indicator (Red) ?: Provides status feedback.

Note: Functional characteristics depend on the Zigbee gateway. The equipment is suitable for mounting at heights ≤ 2 m.

LED Indicator Status

Specifications

Download the eWeLink App & Add SONOFF Zigbee gateway.

Adding Device

Please download the "eWeLink" App from Google Play Store or Apple App Store.

Scan QR Code to Add Device

1. Step 1: Rotate to open the sensor.
2. Step 2: Use a coin or another tool to unscrew the battery cover.
3. Step 3: Take out the battery insulation sheet to power on the device.
4. Step 4: Enter "scan QR code" mode in the eWeLink app.
5. Step 5: Scan the QR code on the device.
6. Step 6: Select "Add Device" in the app.
7. Step 7: Long press the button for 5 seconds. The LED indicator will flash slowly for 180 seconds.
8. Step 8: Select your Zigbee gateway in the app.
9. Step 9: Wait until the addition is done.

Matched Gateways

Compatible gateways include:

• SONOFF: ZBBridge, ZBBridge-P, NSPanel PRO, AIBridge, ZBDongle-P, ZBDongle-E
• Amazon Gateway: Echo Plus 2nd, Echo Show 2nd, Echo 4th Gen
• SmartThings Gateway: SmartThings hub V3, AeoTec Smart Home Hub V3
• Other gateways supporting ZigBee3.0 wireless protocol.

Effective Communication Distance Verification

Install the device in the desired place, then press the Pairing button on the device. The LED indicator flashes twice, indicating that the device and the Zigbee network (router device or hub) are within effective communication distance.

Installation

Choose one of the following mounting methods:

1. Desktop Placement: Place the sensor on a flat surface.
2. Magnetic Mounting: Attach the sensor to a metal surface using its magnetic base.
3. Adhesive Mounting: Stick the sensor to a wall using the included 3M adhesive tape on the base.
4. Screw Mounting: Fix the base to the wall using screws (components 1, 2, 3 shown in diagram).

Detection Zone

The sensor provides a detection range of approximately 6 meters with a detection angle of around 110 degrees.

[Diagram Description: A diagram shows the motion sensor mounted on a wall, emitting detection beams in a cone shape. The range is indicated as 6M and the angle as 110°.]

Safety Warnings and Compliance

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Notice (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003(B). This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

ISED Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

SAR Warning

Under normal use conditions, this equipment should be kept at a separation distance of at least 20 cm between the antenna and the body of the user.

WEEE Warning

WEEE Disposal and Recycling Information: Products bearing the WEEE symbol are waste electrical and electronic equipment and should not be mixed with unsorted household waste. Protect human health and the environment by handing over waste equipment to a designated collection point for recycling. Correct disposal and recycling help prevent negative consequences. Contact local authorities for more information.

EU Declaration of Conformity

Shenzhen Sonoff Technologies Co., Ltd declares that the radio equipment type SNZB-03P complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/compliance/

CE Frequency Information

• Operation frequency Range: Zigbee: 2405-2480MHz
• RF Output Power: Zigbee: ≤10dBm

Battery Safety Information

Hazard Warning: Do not ingest battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If batteries are suspected to have been swallowed or placed inside the body, seek immediate medical attention.

Battery Replacement: Use only the correct battery type. Incorrect types can defeat safeguards.

Disposal Warning: Do not dispose of batteries in fire, hot ovens, or by crushing/cutting, as this can result in an explosion. Do not leave batteries in extremely high temperatures or under extremely low air pressure, as this can cause explosions or leakage of flammable liquid or gas.

Manufacturer Information

Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.

Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China

ZIP code: 518000

Service email: support@itead.cc

Website: sonoff.tech

Made in: China

[Certifications: CE, FCC, ISED, RoHS]