BYTECH 10W Magnetic Desk Wireless Charger with LED Light
Model: BY-OP-CP-522-AC
Product Overview
The BYTECH 10W Magnetic Desk Wireless Charger with LED Light offers convenient wireless charging for compatible smartphones. It features a magnetic alignment system and an integrated LED light.
Visual Description: The charger is depicted as a compact, modern device with a base that illuminates with colored light. A smartphone is shown magnetically attached to the top surface, indicating wireless charging. The product is labeled "10W MAGNETIC DESK WIRELESS CHARGER + LED LIGHT".
Package Includes
- 1 x 10W Magnetic Desk Wireless Charger + LED Light (Dimensions: 2.75in x 2.75in x 2.9in / 7cm x 7cm x 7.25cm)
- 1 x USB-C Cable (39.4in / 100cm)
- 1 x User Manual
Specifications
- Input: 5V 3A, 9V 2A, 12V 1.5A
- Output: 5W, 7.5W, 10W
Compatible Devices
Compatible with smartphones featuring the Magsafe® technology, including:
- Apple iPhone® 16, iPhone® 16 Pro
- Apple iPhone® 15, iPhone® 15 Pro
- Apple iPhone® 14, iPhone® 14 Pro
- Apple iPhone® 13, iPhone® 13 Pro
- Apple iPhone® 12, iPhone® 12 Pro
- And other Magsafe® compatible phones.
Note: Check your device's user manual to ensure proper compatibility. Bytech is not responsible for any damage due to misuse of this Wireless Charger.
Product Components
The charger features the following components:
- 1. Smartphone Charging Pad
- 2. INPUT Charging Port (USB-C)
- 3. LED Power Button
- 4. LED Light
- 5. Swivel base [360° rotation symbol]
Operating the Magnetic Desk Wireless Charger
Connection:
- Connect the small end of the supplied USB-C cable to the USB-C IN Jack on the Magnetic Desk Wireless Charger.
- Connect the large end of the supplied USB-C cable to an available USB port on your computer or a compatible USB power adapter (sold separately).
Note: The charger can also be used with any other available USB power source.
Charging Your Smartphone
- Ensure the Magnetic Desk Wireless Charger is connected to a power source.
- Place your Magsafe® compatible smartphone onto the top center of the charging pad. The magnetic feature will align the phone.
- Your phone will begin charging automatically.
- Remove your phone once it is fully charged.
LED Light Operation
- Press the LED Power button to turn the LED light ON.
- Press the LED Power button again to cycle through RGB and White light modes.
- Press the LED Power button a third time to turn the LED light OFF.
Safety Instructions
- Do not puncture, throw, drop, bend, or modify this product.
- Do not throw this product into fire or water.
- Avoid prolonged exposure to sunlight or rain.
- Do not store or carry flammable liquids, gases, or explosives near the charger.
- Do not allow children to play with the product.
Notes
- Please use a charging cable with appropriate specifications (USB Cable rating 5V 3A Max) to avoid damage to the charger.
- Use an appropriate power adapter that matches the charger's parameters (power adapter sold separately).
- Do not drop, knock, disassemble, or attempt to repair the product yourself.
Caution: For your safety, the charging cable included with this item is intended for use with this product only.
FCC Compliance and RF Exposure
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.
RF Exposure Statement: To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Warranty and Contact Information
Warranty: 12 Months. Please visit bytechintl.com/warranty for details.
Manufacturer: Bytech NY INC.
Contact: 2585 West 13th Street, Brooklyn, NY 11223
Website: bytechintl.com
Trademarks: BYTECH™ is a registered trademark of Bytech NY INC. iPhone® is a registered trademark of Apple, Inc. Android™ is a registered trademark of Google Inc. Bytech has no affiliation with Apple, Inc or Google, Inc.
Certifications: FC, ROHS, CE
Origin: Made in Vietnam
