ANDTE

Welcome

Thanks for choosing ANDTE dehumidifier! ANDTE is dedicated to keeping people healthy, comfortable and more enjoyable by offering quality appliances ranging from dehumidifiers to ice makers, and more. From breathing easier in your office to upgrading your kitchen appliances, we hope ANDTE could help you every step of the way.

READ THIS MANUAL INSTRUCTION CAREFULLY BEFORE USING THE UNIT. PLEASE KEEP THIS FOR FUTURE REFERENCE.

ANDTE DS190P commercial dehumidifier can remove 190 PPD at saturation (95°F, 90% RH) and 90 PPD at AHAM (80°F, 60% RH), reducing humidity to comfortable levels in a short period of time. This dehumidifier has a solid case to withstand harsh environments, is safe and easy to use, guarantees long-term use and easy maintenance, plus we use a copper tube condenser and high quality and accurate sensors, it will be more effective and last longer.

Before plugging in your new dehumidifier, we suggest that you read this user manual as it contains important safety information, operation instructions, troubleshooting, maintenance tips, and warranty information to ensure the reliability and longevity of your dehumidifier.

Customer Support

To access customer support, please email to AndteServices@outlook.com with your purchase order ID to help us address the problem faster and serve you better.

Thank you again!

Safety Information

• Install the dehumidifier on a flat surface to minimize vibration and/or noise.
• Inspect the power cord before use. Never operate the dehumidifier when the power cord or plug is damaged.
• Insert the three-prong plug on the power cord into a matching electrically grounded outlet (120V/60 Hz, 15A at least). Do not use an adapter. Never cut off the third prong. Do not use an extension cord.
• Do not operate the dehumidifier in standing water. Keep motor and wiring dry.
• Never immerse the dehumidifier into water or other liquids.
• Do not put the dehumidifier close to heat-generating devices, including flammable or dangerous materials.
• Unplug the power supply before cleaning or storing the dehumidifier. Always grasp the plug (not the cord) to unplug.
• Do not put fingers or other items into the air inlet or air outlet.
• Never insert any other objects into the dehumidifier body.
• Do not sit, stand or put heavy objects on the dehumidifier.
• This dehumidifier should only be used by adults who have read the manual and understand the operating procedure of the dehumidifier.
• The dehumidifier is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by an adult.

⚠️ Never repair or remove plug and or power cord. Any repairs should be completed by qualified electrician or distributor.

Introduction

Thank you for choosing the dehumidifier by ANDTE! We hope it will bring great convenience to your work and life. We recommend that you save the user manual properly for future reference. Before using this product, please read the user manual carefully to ensure that this product functions at its best.

The ANDTE's dehumidifier adopts an upgraded design, compact structure, easy to operate, and other characteristics, widely used in scientific research, basement, crawl space, greenery, laboratory, gymnasium, sanitation, commodity storage, underground engineering, and dehumidification in high humidity places such as kitchens, bathrooms, archives, warehouses, etc. Can be effectively avoided telecommunications equipment, materials, etc., are damaged due to dampness or rust.

Transportation and Custody

During transportation, this product should be handled preciously to prevent violent vibration. Generally, the packaged product should not be stored in the open air for a long time. It should be placed in a well-ventilated, non-corrosive gas warehouse. It should not be placed upside down. Rainproof measures should be adopted when stored temporarily.

Important Safety Tips

Before using the product, for safe and correct operation and maintenance, please read and understand the following safety tips.

1. When cleaning or storing the dehumidifier, please pull out the plug first, cut off the power supply, and ensure safety.
2. Do not immerse the machine in water or close to water sources.
3. Do not place the machine near heating devices or flammable dangerous goods.
4. Do not insert fingers or stick-like objects into the air inlet or outlet.
5. Please ensure that the drainpipe is installed downwards so that the condensate can drain continuously.
6. The fuselage should be placed or installed horizontally to avoid tilting the fuselage.
7. Never spray the machine with water.
8. Do not spray pesticides or flammable liquids on the machine.
9. Do not place heavy objects on the machine or let children and animals ride.
10. The machine should not be operated in a confined and narrow space.
11. If the power cord is damaged, to avoid danger, it must be repaired or replaced by the manufacturer or its maintenance department or full-time maintenance personnel.
12. The power wiring of the machine must be carried out by the national standard wiring rules, and the power cord must be reliably connected to the external grounding wire.
13. The fixed wiring of the machine connection must be equipped with an all-pole disconnection device (air switch) with a contact distance of at least 0.12 inch.
14. The model specification of the fuse is: 3.15A.
15. The distance between the machine and surrounding objects should be kept at least: 40 inch.
16. The dehumidifier is not allowed to be used by persons (including children) who are physical, sensory, or mentally retarded or lack experience and knowledge, do not touch the machine unless under the supervision or direction of an adult.
17. Children should be under the supervision of adults to ensure that they do not touch the machine at will.

Parts Identification

The following are the identified parts of the dehumidifier:

Front View

• 1. Handle Bar: For carrying and maneuvering the unit.
• 2. Control Panel: Located on the top, houses buttons and display.
• 3. Wheels: For easy mobility.
• 4. Air Inlet: Where air is drawn into the unit, typically covered by a filter.
• 5. Natural outfall: Port for continuous drainage via gravity.
• 6. Pump outlet: Port for drainage using the internal pump.

Rear/Side View

• 1. Air Outlet: Where dry air is expelled from the unit.
• 2. Cord Winder: For storing the power cord.
• 3. Power Cord Port: Connection point for the power cord.
• 4. Pump access port: Access to the pump mechanism or drainage system.

NOTE: There may be slight differences in the model; the actual machine shall prevail.

Operation Instruction

Operation Panel

The control panel features the following indicators and buttons:

Indicators:

• Defrost Indicator: Illuminates when the unit is in defrost mode.
• Pump Working Indicator: Illuminates when the internal pump is active.
• Timer Indicator: Illuminates when the timer function is set.
• Running Indicator: Illuminates when the dehumidifier is operating.

Buttons:

• POWER Button: Press to turn the dehumidifier ON or OFF.
• UP Button: Press to increase the set-point of humidity level or timer.
• DOWN Button: Press to decrease the set-point of humidity level or timer.
• TIMER Button: Press to enable the timer function or confirm the timer settings.
• PUMP Button: Press and hold for 3-5 seconds to manually empty water from the pump reservoir. The pump does not start forcibly if the water tank is empty, and the indicator light will not illuminate.

Target Humidity Value Setting

1. Check the room humidity (After powering on, the digital number on the control panel displays the room humidity readout).
2. Press UP or DOWN button once; the digital number will change to the previous setting value and blink.
3. Repeatedly press the UP or DOWN button to set a desired humidity percentage value between 10%-98% in increments of 1%. The set humidity value needs to be at least 5% lower than room humidity (the digital number keeps blinking while changes are being made).
4. After selecting the desired value, wait for a few seconds until the digital number reverts to the room humidity readout, then let the dehumidifier run.

NOTE: The dehumidifier with a humidistat will automatically stop and restart to maintain room humidity level within a range of ±3% of the set point.

For example, if the set humidity is 50%:

• When the inlet humidity level the dehumidifier detects is 47% (3% lower than the set humidity), the dehumidifier will automatically stop and enter standby mode. During this time, the digital number keeps blinking.
• When the inlet humidity level the dehumidifier detects rises to 53% (3% higher than the set humidity), it will automatically restart.
• However, if the set humidity level is equal to 10, the dehumidifier will enter CONTINUOUS MODE where it will run continuously.

Timer Setting

The TIMER function enables you to either delay AUTO-ON or delay AUTO-OFF the dehumidifier, with choices from 1 hour to 24 hours.

• Setting an AUTO-ON timer: When the dehumidifier is on standby, selecting TIMER will turn the dehumidifier on after the set hours.
• Setting an AUTO-OFF timer: When the dehumidifier is running, selecting TIMER will turn the dehumidifier off after the set hours.

To Set Timer:

1. Press the TIMER button to activate the TIMER feature (the digital number turns into 00 and blinks).
2. Repeatedly press the UP or DOWN button to increase or decrease the delay timer in 1-hour increments, up to 24 hours (the digital number blinks while changes are being made).
3. After selecting the desired TIMER setting value, press the TIMER button again to confirm the timer setting. The digital number then reverts to the room humidity readout, and the TIMER indicator remains illuminated.

Note:

• Set AUTO ON timer when the dehumidifier is off, or set AUTO OFF timer when the dehumidifier is running. It is not allowed to set both AUTO ON and AUTO OFF timers simultaneously.
• The Delay Start/Stop Feature will work until the dehumidifier either starts or stops.
• The TIMER will function only one time, instead of cycling the dehumidifier on or off indefinitely.
• When an AUTO OFF timer has been activated, pressing the TIMER button again allows you to check the remaining time until the dehumidifier automatically turns off.
• If the timer is set to 00, the timer function will not be activated.

Drainage

During operation, the pump will automatically pump the condensation out via the drain hose when the pump reservoir is full. No manual intervention is required.

Before moving the dehumidifier, press and hold the PUMP button for 3-5 seconds to empty the pump reservoir to avoid water spillage. The PUMP indicator will light up and blink when the pump is working. The pump will stop working automatically, and the PUMP light will go off when the pump reservoir is almost empty.

Smart Functions

Auto Drain

Thanks to the built-in pump, the dehumidifier will drain the condensation water automatically.

Wait 3 Minutes before Resuming Operation

To avoid any damage to the dehumidifier, it will not start operation following a complete cycle until after 3 minutes. Operation will automatically start after 3 minutes.

Auto Defrost

When frost builds up on the evaporator coils, the compressor will cycle off, and the fan will continue to run until the frost disappears.

Auto-Restart

If the dehumidifier shuts off unexpectedly due to a power cut, it will restart with the previous function setting automatically when the power resumes.

Note: If the dehumidifier was turned off before a power outage, it will not auto-restart after the power resumes.

Maintenance

⚠️ Ensure the dehumidifier is turned OFF and the plug is removed from the power socket before cleaning or maintenance is carried out.

1. Cleaning the Dehumidifier

Clean the dehumidifier housing with a soft damp cloth. Do not submerge or place water on the dehumidifier or control panel. Water may damage the electronic components of the dehumidifier. Do not use chemical solvents such as benzene, alcohol, gasoline, or other heavy-duty cleaners. The surface may become damaged or deformed.

2. Cleaning the Air Filter

The working performance of the dehumidifier will be greatly reduced if the filters become blocked. Please check and clean the filter regularly.

To Clean the Filter:

1. Open the air filter cover.
2. Slide the filter out.
3. Vacuum any debris from the filter using the vacuum hose and nozzle attachment.
4. Immerse the filter into lukewarm water (about 104°F / 40°C) with a mild detergent, and then wash it and allow it to dry.
5. Once dry, re-install the filter into the dehumidifier.

3. Dehumidifier Storage & Transportation

1. Press and hold the PUMP button for 3-5 seconds to empty the water in the pump reservoir before transportation or storage.
2. Transport and store the dehumidifier upright.

Trouble Shooting Guide

Before seeking support from the service team, you can check the following troubleshooting tips:

Notes:

• When the above fault cannot be eliminated and it is confirmed that repair is required, please contact ANDTE support. Do not disassemble the machine for repair without authorization.
• When the dehumidifier is running or stopped, it is normal to hear the sound of refrigerant circulating.
• It is normal for hot air to be discharged from the air outlet.

Safety Precautions

Please follow these safety precautions for proper use:

• 1. Placement: When using, do not place the dehumidifier on soft, uneven ground to avoid vibration or movement.
• 2. Insertion: Do not use thin rods or hard objects to insert into the fuselage to avoid malfunction or danger.
• 3. Heat Sources: When using, please keep the dehumidifier away from heat sources such as heaters and electric kettles to save electricity.
• 4. Ventilation: When using, please close the doors and windows to achieve the best dehumidification effect.
• 5. Airflow: Do not place items before and after the dehumidifier. If the ventilation is blocked, the dehumidification effect will be affected.
• 6. Power: In case of power failure or long-term non-use, please unplug the power cord.
• 7. Cleaning: When cleaning the dehumidifier, gently wipe it with a damp cloth; do not directly spray water to clean it.
• 8. Objects: Do not place any objects on the dehumidifier.
• 9. Filter Maintenance: Please clean the filter every two weeks (do not use hot water above 104°F / 40°C, alcohol, gasoline, or toluene).
• 10. Drainage Pipe: During continuous drainage, the drainage pipe must be placed horizontally or downwards, and must not be uneven or entangled.
• 11. Filter Drying: After the filter is cleaned, please do not place it in direct sunlight to dry it to avoid deformation.
• 12. Moving/Carrying: Before moving or carrying the dehumidifier, please pour out the accumulated water in the water tank.

Service

ANDTE offers a limited 1-year free warranty on this DS190P dehumidifier, with original proof of purchase (typically you may be only requested to offer the order number or other information to prove a genuine purchase, instead of an invoice) and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts, or workmanship during the warranty period.

During the warranty period, for a damaged part, ANDTE will provide a replacement part if it can be restored to normal use by replacing parts.

The warranty does not apply where damage is caused by other factors, including without limitation:

• Normal wear and tear;
• Abuse, mishandling, accident, or failure to follow operating instructions;
• Exposure to liquid or infiltration of foreign particles;
• Servicing or modifications of the product other than by ANDTE.

ANDTE will try its best to inspect the dehumidifier through photos or videos to troubleshoot and ensure that the problem can be better solved. These are the general terms for warranty service, but customers are urged to reach out with any issue, regardless of warranty terms.

Warranty and Service

If you have an issue with an ANDTE product, please contact us at AndteServices@outlook.com, and we will do our best to resolve it for you.

Support Hours

24 Hours available

*Please have your order number ready before contacting customer support.

Product Certification: The product is approved to leave the factory after passing the inspection. Production date: see the nameplate or barcode of the fuselage.

❓ Product Certification

The product is approved to leave the factory after passing the inspection.

Production date: see the nameplate or barcode of the fuselage.