SHADA LED's Light Outdoor Series

Product Overview

The SHADA LED's Light Outdoor Series is a solar-powered lighting solution designed for outdoor use. It features a motion sensor and offers multiple operating modes, providing efficient illumination and security. The product has a detection range of 2-6 meters and an illumination area of 6-7 meters, with a 120° detection angle.

Specifications

Operating Modes

The product offers three distinct operating modes:

• Mode A: Operates at 25% brightness for approximately 5 hours, then transitions to Mode B. This mode is indicated by a [sun] icon and a [timer] icon.
• Mode B: Operates at 3% brightness continuously. When motion is detected, it switches to 100% brightness for approximately 20 seconds. This mode is indicated by a [moon] icon, a [motion sensor] icon, and a [timer] icon.
• Mode C: Operates at 3% brightness continuously. When motion is detected, it switches to 100% brightness for approximately 30 seconds. This mode is indicated by a [moon] icon, a [motion sensor] icon, and a [timer] icon.

Box Contents

• 1x Solar Lamp
• 1x Accessory Bag
• 1x Manual
• 1x Installation Card

Safety Information

General Safety

• Read the manual carefully before use and keep it for future reference.
• Use the product only for its intended purposes as described in the manual.
• Do not use the product if any part is damaged or defective; replace it immediately.
• This product must not be used near children without adult supervision. Children must not play with the device.
• Do not modify the product in any way.
• Avoid exposing the product to water or moisture (IP20 rating). Do not immerse the product in water (IP44-IP66 rating).
• Keep the product away from heat sources.
• Do not block ventilation openings.
• Do not look directly into the LED light source.
• Maintain a minimum distance of greater than 2 meters between the lamp and the illuminated surface.

Electrical Safety

• To reduce the risk of electric shock, this product should only be opened by an authorized technician when service is required.
• Do not use the product if the cable or plug is damaged or defective. It must be replaced by the manufacturer or an authorized repair agent.
• Before use, always ensure that the mains voltage matches the voltage on the device's rating plate.
• Ensure the cable does not hang over the edge of a worktop and cannot be accidentally caught or tripped over.

Warning

• The light source contained in this luminaire shall only be replaced by the manufacturer, their service agent, or a similarly qualified person.
• Caution: Risk of electric shock.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire must be destroyed.

Disposal and Warranty

Disposal

The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste. For more information, contact the retailer or the local authority responsible for waste management.

Warranty

The unit has been carefully checked for defects. If you have a cause for complaint, please return the product to the retailer where you purchased it, along with your proof of purchase.

Compliance and Documentation

The product has been manufactured and supplied in compliance with all relevant regulations and directives valid for European Union member states. It complies with all applicable specifications and regulations in the country of sale.

Formal documentation, including the Declaration of Conformity, Material Safety Data Sheet, and product test report, is available upon request.

CE Declaration

This product complies with the following directives:

• LVD: 2014/35/EU
• EMC: 2014/30/EU
• RoHS: 2011/65/EU

For products with radio transmitter units, it also complies with RED: 2014/53/EU.

The complete Declaration of Conformity Document (DoC) can be found online.