Yealink UVC50 USB PTZ Camera

Package Contents

The package includes the following items:

• UVC50 Camera
• 2.5m USB Cable
• 7.5m Ethernet Cable
• Power Adapter 48V/0.7A
• VESA Accessory
• Velcro x2 (One Velcro is on the bracket)
• Cable Ties x5
• Mounting Bracket and Accessories
• UVC50 Quick Start Guide

It is recommended to use accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in poor performance.

UVC50 Installation

Put on a Flat Surface

Place the UVC50 on a conference table. Ensure the angle of inclination is not more than 5 degrees for proper operation.

Mount on the top of the TV

For TVs with thickness between 1mm and 36mm

Follow these steps for mounting on top of the TV:

1. Attach the bracket to the TV, paying attention to its direction.
2. Secure the bracket.
3. Mount the UVC50 onto the bracket.

If the UVC50 cannot be mounted when the bracket reaches the given location, remove the bracket and convert its direction. Refer to the following section for more information.

For TVs with thickness between 37mm and 77mm

Follow these steps for mounting on top of the TV:

1. Attach the bracket to the TV, noticing the direction of the bracket.
2. Secure the bracket.
3. Mount the UVC50 onto the bracket.

If the bracket reaches the edge of the UVC50 and cannot be placed on top of the TV, choose another installation method.

Caution: Do not lift the UVC50 with the bracket attached, as it may fall.

Mount on the Wall

The recommended mounting height is 1.55m-1.85m above the ground.

1. Drill holes with a diameter of 6mm and a depth of 30mm.
2. Attach the bracket using T4x30 screws.

Mount on the Ceiling

For ceiling-mounted installation, a separate bracket is required. The bracket must meet the following requirements:

• Bear a weight of at least 10.5kg (23.15 lb.).
• Thickness must be between 2mm (0.08 in.) and 3 mm (0.12 in.).
• Include a location pillar insertable into the VESA accessory's location hole.
• The distance between the bracket's screw and the location pillar must be 14 mm (0.55 in.).

Mounting involves using M3x8 screws and the VESA accessory, which has screw holes (6.0 mm depth) and location holes (5.0 mm diameter).

Mount onto a TV Stand or a Tripod

A TV stand or tripod must be purchased separately. The requirements for the stand or tripod are the same as for the ceiling mount bracket. The installation steps are also similar to the ceiling mounting process.

Mounting uses M3x8 screws and 1/4"-20 UNC screws.

Cable Ties Installation

Use cable ties to neatly bundle cables.

Hardware Interface Instructions

The UVC50 features the following interfaces:

• 1 USB: Insert DD10 to connect to CPW90 wireless microphone (for overseas use).
• 2 Microphone (optional): Connect to VCM34.
• 3 Video Out: Connect to a PC for video output.
• 4 Line In: Connect an audio input device using a 3.5mm audio cable.
• 5 Line Out: Connect an audio output device using a 3.5mm audio cable.
• 6 DC48V: Connect to the power adapter.
• 7 Reset: Resets the UVC50 to factory defaults.
• 8 Security slot: Connect a universal security cable to lock the UVC50 down.

UVC50 Connection

Connect the UVC50 to your system:

• Connect the UVC50 to a PC via USB (using DD10 for CPW90 if applicable).
• Connect a microphone (e.g., VCM34) to the microphone port.
• Connect a soundbar or audio output device to the Line Out port using a 3.5mm cable.
• Connect the power adapter to the DC48V port.

The priority of audio input channels is: Microphone (VCM34) > USB (CPW90) > line-in.

Note: If any cable's skin is broken during use, replace it immediately.

LED Indicator Instructions

The UVC50 has the following LED indicators:

Regulatory Notices

Operating Ambient Temperatures

• Operating temperature: +32 to 104°F (0 to 40°C)
• Relative humidity: 5% to 90%, noncondensing
• Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty

Yealink's product warranty is limited to the unit itself when used normally according to operating instructions and system environment. Yealink is not liable for damage, loss, or claims arising from the use of the product, including financial damages or lost profits.

Explanation of the symbols

• DC symbol: Indicates the DC voltage.
• WEEE Warning symbol: Represents the crossed-out wheeled bin symbol, indicating that WEEE should not be disposed of as unsorted municipal waste and must be collected separately to avoid potential environmental and health effects from hazardous substances.

Restriction of Hazardous Substances Directive (RoHS)

All adapter devices comply with the EU RoHS Directive. Compliance statements can be obtained by contacting support@yealink.com.

Safety Instructions

General Requirements

• Read safety instructions carefully before installation and use.
• Keep the device dry and clean during storage, transportation, and operation; avoid collision and crash.
• Do not attempt to dismantle the device yourself; contact an appointed maintenance center for repair.
• Respect relevant laws and statutes, including the legal rights of others.

Environmental Requirements

• Place the device in a well-ventilated area, away from direct sunlight.
• Keep the device dry and free of dust.
• Do not place near inflammable or fire-vulnerable objects (e.g., rubber materials).
• Keep away from heat sources or open flames (e.g., candles, electric heaters).

Operating Requirements

• Do not allow children to operate the device without guidance.
• Prevent children from playing with the device or accessories to avoid accidental swallowing.
• Use only manufacturer-provided or authorized accessories.
• Ensure the power supply meets the device's input voltage requirements; use the provided surge protection power socket.
• Ensure hands are completely dry before plugging or unplugging cables.
• Do not spill liquids on the product or use near water (e.g., bathtub, sink, swimming pool).
• During thunderstorms, stop using the device and disconnect it from the power supply to avoid lightning strikes.
• If the device is left unused for an extended period, disconnect it from the power supply.
• If smoke, abnormal noise, or smell is detected, immediately disconnect the device from the power supply.
• Do not insert foreign objects into equipment slots.
• Connect the grounding cable first before connecting other cables; do not disconnect it until all other cables are disconnected.

Cleaning Requirements

• Disconnect the device from the power supply before cleaning.
• Use a soft, dry, anti-static cloth for cleaning.
• Keep the power plug clean and dry.

Troubleshooting

Issue: Unit cannot supply power to devices other than Yealink device.

• Check for a bad connection with the plug. Clean the plug with a dry cloth or try another wall outlet.

Issue: Usage environment is out of operating temperature range.

• Use the device within the specified operating temperature range.

Issue: Cable between the unit and Yealink device is connected incorrectly.

• Connect the cable correctly.

Issue: Cannot connect the cable properly.

• Ensure you have connected the correct Yealink device.
• Use the correct power supply.
• Check for dust in the port and clean it.

For further questions, contact your dealer or an authorized service facility.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Unauthorized changes may void the user's authority to operate the equipment.

IC Statement

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to two conditions: (1) this device may not cause interference; and (2) it must accept any interference, including interference that may cause undesired operation. (CAN ICES-3(B))

Contact Information

YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands

YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Made in China

About Yealink

Yealink is a global leader in enterprise communication and collaboration solutions, providing video conferencing services worldwide. With a strong focus on R&D and innovation, Yealink leverages its technical patents in cloud computing, audio, video, and image processing to offer comprehensive audio and video collaboration solutions. Yealink ranks first in global market share for SIP phone shipments, serving customers in over 140 countries and regions.

Technical Support

Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQs, and product documents.

For better service, submit technical issues via the Yealink Ticketing system (https://ticket.yealink.com).