Manuals+

Creality K1 Max 3D Printer User Manual

Version 1.4

Dear Users

Thank you for choosing Creality products. For the best experience, please read this User Manual carefully and strictly follow the instructions to operate the printer. Creality's teams are ready to provide the best services. Please contact us via the phone number or e-mail address provided at the end of this User Manual if you encounter any problems with the printer. For a better experience, you can also learn how to use the printer in the following ways:

NOTES

  1. Do not use the printer in any way other than described herein to avoid personal injury or property damage.
  2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, cool, and dustless environment.
  3. Do not expose the printer to violent vibration or any other unstable environment, as this may cause poor print quality.
  4. Please use recommended filaments to avoid clogging of the extrusion head and causing damage to the machine.
  5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet that accompanies the printer.
  6. Do not touch the nozzle and the heated bed during operation to avoid burns or personal injury.
  7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable parts that could cause crushing and cutting injuries to bodily parts.
  8. Use the provided tools to clean the filament from the extruder in time, taking advantage of the residual temperature after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns.
  9. Clean the printer frequently. Clean the printer body with a dry cloth regularly after powering off the printer. Wipe away dust, bonded print filament, and foreign objects on the guide rails.
  10. Children under 10 years old should not use the printer without supervision, otherwise it may cause personal injury.
  11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any violators' legal liability under any circumstance.
  12. Tip: Do not plug in or unplug wires on a charged basis.

Contents

1. About the Device

2. Unboxing

3. About the User Interface

4. First Printing

5. Functional Specification

6. Tips and Routine Maintenance

1. About the Device

1.1 About the Printer

The printer includes the following components:

1.2 Device Specifications

Basic Parameters
Parameter Value
Product Model K1 Max
Dimensions 435*462*526mm
Max. Build Dimensions 300*300*300mm
Print Technology FDM
Rated Voltage 100-240V~, 50/60Hz
Rated Power 1000W
Ambient temperature 10℃-30℃ / 50°F-86°F
Extruder Sprite Direct Drive
Supported Filament PLA/ABS/Carbon/PETG/PET/TPU95A
Max. Nozzle Temperature 300℃
Screen 4.3 inch touch screen
Printing Method USB Flash Disk/LAN Printing/Creality Cloud Printing
Connection USB flash disk/WIFI/Ethernet
Power Loss Recovery Yes
Filament Detection Yes
Auto leveling Yes
Camera Yes
AI LIDAR Yes

1.3 Packing List

The package includes:

Tool Box List:

* Tips: The above accessories are for reference only. Please refer to the physical accessories.

2. Unboxing

2.1 Unpacking Steps

Take the packing cotton and tools in the order shown in the figure.

  1. Handle the top cover with care (the glass is fragile).
  2. Take the touch screen and Power Cable.
  3. Move the Extruder to one side in the direction indicated by the arrow and take the grey foam as shown in the figure.

2.2 Install the Product

  1. Install the door handle on the front door as shown in the diagram.
  2. Connect the touch screen to the flat cable extended from the base according to Figure A. Then snap the touch screen into the slot in the baseplate, as shown in Figure B. (The direction is as shown in the figure; otherwise, the screen interface may be damaged.)
  3. A: Connection and power on. B: Install the material barrel.
  4. Load filaments. (Insert the filaments into the deepest part of the Teflon tube until it cannot be moved.)
    Note: Keep the Extrusion switch off before printing.
  5. Install the top cover. (Put the top cover gently on the top of the machine.)

Caution:

  1. When printing low-temperature filaments such as PLA and flexible filaments, remove the clear top cover if the room temperature exceeds 30°C.
  2. When printing high melting-point filaments such as non-PLA and non-flexible filaments, be sure to keep the forming chamber temperature with the clear top cover closed to avoid cracking of the mould.

⑥ Select a language and click “Next”. Remove three screws a, b and c according to the position indicated by the yellow arrow. Click “OK” on the screen.

⑦ Keep the blue cube in the figure clean of debris and then click “OK”.

2.3 Power-on guide

  1. Network Settings
  2. Time Zone Settings
  3. Creality Cloud binding
  4. Self-check
  5. Self-checking
  6. Self-check completed

Note: The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest firmware UI published on the official website.

3. About the User Interface

3.1 Main, Tune

Main Interface: Displays information such as Nozzle Temperature, Hotbed Temperature, Chamber temperature, and parameters that can be manually set.

Print Interface: Shows LED switch, Cooling inlet, Print Time, and Time remaining.

Tune Interface: Allows manual adjustment of various printing parameters.

Note: The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest firmware UI published on the official website.

3.2 File

The file management system allows users to:

Note: The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest firmware UI published on the official website.

3.3 Settings, Support

Settings: Includes System settings (e.g., Language, Sound, Wi-Fi) and Network settings (e.g., IP address, DNS).

Support: Provides access to Help, Error history, and Upload Log.

Note: The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest firmware UI published on the official website.

4. First Printing

4.1 Local Printing

  1. Select a local model.
  2. Select to print.
  3. Printing progress is displayed.

Note: The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest firmware UI published on the official website.

Note: Keep the Extrusion switch off before printing.

4.2 LAN Printing

Preparation:

Steps:

  1. Choose a language and region.
  2. Choose a Printer.
  3. Click on "Import Model" and select the model file.
  4. Open the model and click on “Slice”.
  5. Selection of LAN printing.
  6. Add a device: a. Add by scanning → Select a device.
  7. Add a device: b. Add a device by manually entering the IP address.
  8. Device List.
  9. Device Details.

Note: The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest firmware UI published on the official website.

4.3 CrealityCloud printing

  1. Scan the QR code and download the Creality Cloud app.
  2. Download the app.
  3. Sign up for an account.
  4. Log in to your account.
  5. Add a new device.
  6. Add a device.
  7. Select model on the homepage.
  8. Slice the model.
  9. Print the model.
  10. Select a device.
  11. Printing.

5. Functional Specification

6. Tips and Routine Maintenance

Models: K1 Max 3D Printer, K1 Max, 3D Printer, Printer

File Info : application/pdf, 18 Pages, 5.64MB

PDF preview unavailable. Download the PDF instead.

C1SERRNwaTL

References

iLovePDF

Related Documents

Preview Creality K1 3D Printer User Manual - Setup, Operation, and Maintenance Guide
Your essential guide to the Creality K1 3D printer. This manual covers unboxing, installation, user interface navigation, printing procedures (USB & LAN), maintenance tips, and troubleshooting. Get started with high-speed 3D printing.
Preview Creality CR-10 V3 3D Printer User Manual: Setup, Operation, and Troubleshooting
Comprehensive user manual for the Creality CR-10 V3 3D printer, covering assembly, operation, bed leveling, filament loading, printing, circuit wiring, and troubleshooting. Includes detailed instructions and safety guidelines.
Preview Creality Ender-3 V3 KE 3D Printer User Manual
This user manual provides comprehensive instructions for the Creality Ender-3 V3 KE 3D printer, covering setup, operation, maintenance, and troubleshooting. Learn about its features, assembly, auto-guidance, first printing steps, and technical specifications.
Preview Ender-3 E 3D Printer User Manual | Creality
Comprehensive user manual for the Creality Ender-3 E 3D printer, covering assembly, setup, operation, leveling, filament loading, and slicing software usage.
Preview Creality CR-6 SE 3D Printer User Manual
Comprehensive user manual for the Creality CR-6 SE 3D Printer, covering setup, operation, maintenance, and troubleshooting.
Preview Creality K1 3D Printer User Manual
Discover the Creality K1 3D Printer with this comprehensive user manual. Learn about setup, operation, specifications, maintenance, and safety for optimal FDM printing. Visit creality.com for more.
Preview Creality K1 Max 3D Printer User Manual
A comprehensive user manual for the Creality K1 Max 3D printer, covering setup, operation, maintenance, and troubleshooting. Includes detailed instructions, specifications, and safety precautions.
Preview Creality Print 4.3 User Manual - Comprehensive Guide
Explore the features and functionalities of Creality Print 4.3, a powerful FDM slicing software. This user manual covers installation, slicing modes (FDM, Laser, CNC), file formats, printer and material management, and cloud integration.