Champion 201110 9200W Electric Start Generator
Quick Start Guide
Important Safety Information
WARNING: Read the ENTIRE operator's manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury or even death.
ADVERTENCIA: Read the operator's manual completely to familiarize yourself with the product's features before operating. Failure to operate the product correctly may result in damage to the product, personal property, and cause serious injury or death.
Visit www.championpowerequipment.com. © Champion Power Equipment 2021. All Rights Reserved.
Setup / Montaje
Open shipping carton.
Assembly > Unpacking
Description: Image of an open shipping carton with arrows indicating contents being removed.
Attach wheel kit.
Assembly > Install the Wheel Kit
Description: Diagram shows attaching wheel assemblies (A) to the generator frame using bolts and nuts (x2 for each wheel). The generator is shown upright with wheels attached.
Add oil.
Assembly > Add Engine Oil.
Recommended: 10W-30, up to 37.2 fl. oz. (1100 ml). DO NOT overfill.
Description: Diagram shows adding 10W-30 oil to the engine's oil fill port using a funnel. A bottle labeled "10W-30" is shown. The recommended fill level is indicated.
Connect the battery.
Assembly > Connect the Battery.
Description: Diagram shows the battery and its connector. Instructions indicate to cut the cable tie on each side of the battery connector and push the two halves of the connector together tightly.
Start Up / Arrancar
Move the generator outdoors.
Description: Diagram illustrates moving the generator to an open, outdoor area with the exhaust pointing away. A safety zone of 5ft (1.5m) is indicated around the generator, with a warning that heat from the muffler and exhaust gas can ignite combustible materials.
Add fuel.
Assembly > Add Fuel
DO NOT use E15 or E85.
Description: Diagram shows adding fuel to the generator's fuel tank. Labels "E15" and "E85" are shown with a prohibition symbol [?], indicating these fuel types should not be used.
DO NOT plug in any electrical devices.
Description: A prominent warning symbol [!] is shown, along with an electrical plug symbol with a prohibition symbol [?]. Text reads: "NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!"
Turn the fuel valve "ON".
Description: Diagram shows the fuel valve lever being moved to the "ON" position.
Start the generator.
Electric Start:
- Move the choke lever to the "CHOKE" position.
- Press and hold the ignition switch to the "START" position.
- Move the choke lever to the “RUN” position.
Manual Start:
- Push the ignition switch to the “ON” position.
- Move the choke lever to the "CHOKE" position.
- Pull the starter cord.
- Move the choke lever to the “RUN” position.
Description: Diagrams illustrate the sequence for both electric and manual starting, showing the positions of the choke lever and ignition switch, and the action of pulling the starter cord.
Plug in.
Operation > Connecting Electrical Loads.
Description: Diagram shows an electrical plug being connected to a device, with a checkmark symbol [✔️] indicating a successful connection.
Resources & Support
Visit the Champion Power Equipment YouTube channel to watch how-to videos and subscribe for the latest product updates.
Need Assistance or Have a Question? Give us a call.
Phone: 1-877-338-0999
Website: CHAMPIONPOWEREQUIPMENT.COM