Hotmoon Luna Pro Smart Sound Machine

Start Your New Sleep

Step 1: Download and Register the APP

Download the Hotmoon app from the Apple App Store or Google Play, then create or log in to your account.

NOTE:

• For Android versions below 12, geographic location permission is required to connect via Bluetooth. This will not be used to record personal data.
• The Hotmoon app is regularly updated; follow in-app instructions for any changes.

[App download available on Apple App Store and Google Play]

Step 2: Plug it in

Connect the device to a power adapter with an output voltage of 5V1A using the USB-C cable.

Step 3: Connect Your Luna Pro

Press the power button on the device to power it on. Open the Hotmoon APP and follow the in-app steps to connect your Luna Pro.

NOTE:

• Enable the Bluetooth on your phone.

[App interface showing connection steps and FAQs]

Things to Try

⏰ 1. Two-phase Alarm

In the Alarm column on the "My Plan" page, tap '+' to select your preferred sound and duration for Wake Up and Get Up.

? 2. Customize 2 Sound Buttons

Tap "Edit" on the "My Sounds" page, select a sound to replace, choose your preferred sound from the Library to add, and save – your device will sync automatically.

⚙️ 3. Customize a Routine

Create your routine by modifying defaults or customizing with library sounds. Once set up, tap the routine button [routine-symbol] to start your routine—No Phone Required.

? 4. Adjust Clock Brightness

Tap the settings icon [settings-icon] in the upper right corner of the "My Plan" page to adjust.

? 5. Bluetooth Speaker Mode

Press the mode switch button on the bottom of the device. Wait for the "Bluetooth Speaker Mode" voice prompt. Check your phone's Bluetooth settings and connect to 'Luna Pro Speaker'.

? 6. Adjust the Voice Prompt Volume

After pairing, tap the settings icon [settings-icon] on the "My Plan" page → "Prompt Tone Volume" and adjust the slider.

Buttons

[Diagram showing the top and side of the Luna Pro device with numbered buttons]

1. Routine

Tap when you're ready to rest. It will seamlessly transition through each step of your Routine as programmed in the app. Once your Routine is playing, tap this button to skip to the next step. Sound, light, and duration can be customized in the app, and up to 8 combos can be set.

2. Volume +

Tap: Volume up. Tap over 2s: Volume up continuously.

3. Light

Tap: Cycle through 7 colors and off. Hold 2s: Turn off the light.

4. Volume -

Tap: Volume down. Tap over 2s: Volume down continuously.

5. Sleep Sounds

Tap to switch between up to 9 sounds set in the app.

6. Power

Tap: turn on, or switch to standby mode.

7. Relax Sounds

Tap to switch between up to 9 sounds set in the app.

8. Snooze Status

The icon lights up during snooze.

9. AM/PM

Once paired, it syncs with your phone's time.

10. Alarm Status

The icon lights up during the alarm.

11. Clock

After pairing it with your phone, the clock will automatically set its time. You can adjust the brightness and clock display period in the app.

12. Mode Switch

Press to switch between the Sound Machine Mode and Bluetooth Speaker Mode. The default is Sound Machine Mode. Long press 3s to enter the pairing status.

Snooze

When the alarm sounds, any touch button functions as a Snooze button. You can hold any button to stop the alarm.

[Image showing a hand hovering over the device with 'Snooze' text displayed]

NOTE:

• The wake-up alarm volume gradually fades in to 5% over 30 seconds, gently easing you into wakefulness.
• You can set the wake-up alarm to start 10, 15, or 20 minutes before the get-up alarm.
• By default, each snooze lasts 9 minutes and can repeat up to 3 times—both settings are adjustable in the app.
• If left untouched, the alarm will automatically turn off after 1 hour.

⚠️ Safety Warning

• Please always keep the device at least one meter away from children as the cord can pose a strangulation hazard.
• This product is not waterproof. Do not use it near or place in water.
• Do not place this device aloft. When placing it on the table, please avoid the edges to prevent it from falling down, which might damage the device and also get potential hurt.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Need help?

Hotmoon support is here. Contact us at support@hotmoon.com

Model: HMNL-09

FCC ID: 2BOJIHMNL-09

Manufacturer: Dongguan Michuang Technology Ltd.

Address: Room 1102, Building 15, No. 3 Yongtai Road, Tangxia Town, Dongguan City, Guangdong Province, China

[Luna Pro User Guide text visible near a QR code]