ICE-Watch User Manual
Instructions for getting started and setting the time.
Getting Started
To begin using your watch, first remove the plastic stopper. This stopper is typically located near the crown (winder) and should be pulled out in the direction indicated by an arrow.
After removing the stopper, press the crown (winder) back into its normal position.
Instructions and Care
Regular servicing is essential for your watch to function correctly. The frequency of servicing depends on the watch model, climate, and how the owner cares for it. To keep your watch in optimal condition for as long as possible, follow these general recommendations:
- Temperature: Avoid exposing your watch to temperatures below 0°C (30°F) or above 35°C (100°F).
- Care: Prevent prolonged exposure to direct sunlight, steam, and contact with alcohol, detergents, perfumes, or cosmetic products. These can cause distortion, discoloration, or other damage.
- Water Usage: Do not operate any watch buttons or the crown while the watch is submerged in water to prevent water from entering the mechanism.
The information in this document is the property of ICE Universal Ltd and may not be reproduced without their authorization.
Environmental Disposal Information
The symbol ♻️ (or a similar symbol indicating separate waste collection) signifies that this product and/or its battery must be disposed of separately from household waste, in accordance with local laws and regulations. When the product reaches the end of its useful life, please take it to a designated collection point provided by local authorities. Separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Setting the Time
The watch features a crown (winder) that controls time setting. The crown typically has multiple positions.
Diagram Description: The diagram shows the watch face with three hands: a minute hand, an hour hand, and a second hand. It also illustrates the crown in its 'Normal winder position' and its '1st position'.
- Gently pull the crown out to the 1st position.
- Turn the crown to set the hour and minute hands to the correct positions.
- The second hand will restart its movement once the crown is pushed back into its normal position.
