Anker PowerConf User Manual
At a Glance
The Anker PowerConf is a portable conference speakerphone. The following diagram illustrates its key components:
| Label | Component | Description |
|---|---|---|
| 1 | Multi-function button | Controls various functions, often related to calls or playback. |
| 2 | Volume down button | Decreases audio volume. |
| 3 | Mute button | Mutes or unmutes the microphone. |
| 4 | Phone call button | Answers or ends calls. |
| 5 | Volume up button | Increases audio volume. |
| 6 | Status LED | Indicates device status, call status, or sound direction. |
| 7 | Power LED | Indicates power status and battery level. |
| 8 | Power button | Turns the device on or off. |
| 9 | Bluetooth button | Initiates or manages Bluetooth pairing. |
| 10 | Bluetooth LED | Indicates Bluetooth connection status. |
| 11 | USB port (Type-A) | Used for charging external devices (charge out). |
| 12 | Audio output port | Connects to external speakers via an AUX cable. |
| 13 | USB port (Type-C) | Used for charging the device (charge in). |
Connecting
The Anker PowerConf can be connected in two primary ways:
Connect via USB
Connect the device to your computer using a USB cable. This is typically done using the USB-C port on the device and a USB-A port on the computer.
Connect via Bluetooth Pairing
Connect wirelessly to your computer or mobile device via Bluetooth. When powered on for the first time, the product automatically enters Bluetooth pairing mode.
Bluetooth LED Status
| Indicator | Status | Description |
|---|---|---|
| (No indicator) | Press | Enter Bluetooth pairing mode |
| Flashes blue | Bluetooth pairing | Bluetooth pairing |
| Steady blue | Bluetooth connected | Bluetooth connected |
Once connected, the device will attempt to reconnect to the last successfully paired device each time it is powered on. To disconnect Bluetooth, press the Bluetooth button again.
Powering On/Off
To power on the device, press and hold the power button for 2 seconds. The status LED will light up clockwise and then fade out. To power off, press and hold the power button for 2 seconds.
Power LED Behavior
| Indicator | Status | Description |
|---|---|---|
| Steady white | Power on | |
| Light off | Power off |
The device will automatically power on when connected to a computer. It will also automatically power off after 30 minutes of inactivity or if no audio source is detected.
Button Controls
The Anker PowerConf features several buttons for controlling calls and audio:
| Button | Action | Function |
|---|---|---|
| [volume-up] / [volume-down] | Press or press and hold | Volume up / down |
| [phone-icon] | Press | Answer / End a call |
| [phone-icon] | Press and hold for 2 seconds | Reject a call |
| [mute-icon] | Press | Mute or restore the microphone |
| [play-pause-icon] | Press | Play / Pause music |
Status LED Behaviors
The Status LED provides visual feedback on the device's current state:
| LED Behavior | Description |
|---|---|
| Lights up white for 2 seconds | USB connected to computer |
| Breathes green | Coming call |
| Lights up blue partly | Sound direction detected |
| Lights up blue clockwise or counterclockwise | Increase or decrease volume |
| Turns red | Muted |
| Lights up green | Press Power button to check the battery level |
Charging
The Anker PowerConf can be charged and can also charge external devices.
Charging this product
Connect a USB-C cable to the USB port (Type-C) for charge in on the device and to a power adapter to charge the speakerphone.
Power LED Behavior (Charging Product)
| Indicator | Status | Description |
|---|---|---|
| Steady red | Being charged | |
| Steady white | Fully charged | |
| Flashes red | Low battery |
Charging an external device
Connect an external device to the USB port (Type-A) for charge out on the device using a USB cable. This allows the PowerConf to act as a power bank.
- When the device is powered off or being charged, it will not charge external devices.
- When the remaining battery is less than 30%, the charge-out current will be 5V 1A. If the battery is less than 10%, it will not charge external devices.
Audio Output
Connect an external speaker to the AUX jack of this product by using an AUX cable (not provided). The audio will be played through the external speaker.
Soundcore App
Download the Soundcore app to access software updates and enhanced features for your Anker PowerConf.
You can find the app on the Google Play Store and the Apple App Store.
Google Play and the Google Play logo are trademarks of Google Inc. Apple and the Apple logo are trademarks of Apple Inc.
