ROVSUN
Wi-Fi Function User Manual
[Wi-Fi symbol] Wi-Fi
[Android logo] [Apple logo]
This description is applied to Air Conditioners with Wi-Fi function. Please read the manual carefully before using the product and keep it for future reference.
Made in China
Let's get start!
Operation guideline. Please take below simple guideline instruction as reference.
| Operation Steps | Operation Items | New Account | Re-install APP (registered before) |
| Step 1 | Download and Install APP | YES | YES |
| Step 2 | Activate APP | YES | YES |
| Step 3 | Registration Account | YES | NO |
| Step 4 | Login | YES | YES |
| Step 5 | Add Device to control | YES | Registered Device will remain. |
Note: If you registered the account and added device before, when you re-install the APP again and login, the added device will remain.
FCC Caution (FCC ID: 2AJCLTWAC-TYWFS/2ANDL-WBR3)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The distance between user and device should be no less than 20cm.
Wi-Fi Module specification and basic information
1. Minimum specifications on a Smart phone:
- Android 5.0 version or higher
- IOS 9.0 version or higher
2. Basic parameters for Wi-Fi module
| Parameters | Details |
| Network frequency | 2.400 - 2.500GHz |
| Standards of WLAN | IEEE 802.11 b/g/n(channels 1-14) |
| Protocol stack support | IPv4/IPv6/TCP/UDP/HTTPS/TLS/MulticastDNS |
| Security support | WEP/WPA/WPA2/AES128 |
| Network type support | STA/AP/STA+AP |
Download and Install the App
[QR code for Android app download]
[SmartLife-SmartHome app logo]
For Android smart phone
- Method 1: Please scan the QR code with a browser scanner, download and install the APP.
- Method 2: Open the Google "Play Store" on your smart phone and search "SmartLife-SmartHome", download and install the APP.
For IOS smart phone
- Method 1: Please scan the QR code and follow the tips to get into "AppStore", download and install the APP.
- Method 2: Open the Apple "AppStore" on your smart phone and search "SmartLife-SmartHome", download and install the APP.
Note: Please enable the permissions of Storage/Location/Camera for this APP when installing. Otherwise it will have some problems when operating.
Activate APP
The first time the app is used, it will need activating.
- Launch the APP "SmartLife-SmartHome" on your smart phone.
- Method 1: Tap button "Scan" and scan the right Activate QR code. Method 2: Tap "or Enter Activation Code" in bottom of the screen, then enter the activate code and tap "CONFIRM".
[App screenshot showing activation screen with 'Scan' button]
[Activation QR code]
OR ROVSUN
Note: Without the QR code or activation code, you can't activate the APP and using it, please keep them safe.
or Enter Activation Code
******
CANCEL CONFIRM
Registration
- If you don't have any account please tap button "Register".
- Read the Privacy Policy and tap "Agree".
[App screenshot for registration]
[App screenshot for Privacy Policy agreement]
- Tap ">" and choose the country.
- Enter your e-mail address.
- Tap the button "Obtain verification code".
[App screenshot for country selection]
Search the country or slide the screen up/down to find and choose the Country.
< Resister
***********
> enter your e-mail address here
X
Obtain verification code
I Agree User agreement and Privacy Policy
Registration
- Enter the verification code you received from e-mail.
- Set the Password with 6-20 characters including characters and numbers.
- Tap "Done".
[App screenshot for verification code entry]
[App screenshot for password entry]
Login
- Tap "Log in with existing account".
- Enter your registered account and password.
- Tap "Log in" button.
[App screenshot for login screen]
Login
The first time the APP is used, Create family is needed:
- Tap "Create family".
- Make name for the family.
- Set the location.
- Choose default rooms or add new rooms.
- Tap "Done" and "Completed".
Turn on your smart life
Create family
Log out
choose the recommended room or make a new room, then tap Done.
< Add Room Done
Room Name *******
Recommended Living Room Master Bedroom Second Bedroom Dining Room Kitchen Study Room Porch Balcony Kids Room Closet
< Add family Done
Family Name My home Family Location Set location >
Smart devices in rooms:
Living Room Master Bedroom Second Bedroom Dining Room Kitchen Study Room
Add Room
You can change the room settings anytime
Family created successfully View family Completed
CANCEL CONFIRM
Allow Smart Life to access this device's location?
ALLOW ONLY WHILE IN USE ALLOW ALL THE TIME DENY
Note: The app can open the map on your phone and you can set the location where you are.
Login
Forgot the password
If you forgot the password or you want to reset the password, operate as below:
- Tap "Forgot password".
- Enter your account(e-mail address) and tap button "Obtain verification code".
- Enter the verification code received by your e-mail.
- Set the new password and tap button "Done".
[App screenshot for forgot password flow]
Login means that you agree with User Agreement and Privacy Policy
Add device
There are 2 modes CF(Quick connection) and AP(Access Point) for adding device.
CF mode
- Power on the indoor unit, no need to launch the air conditioner.
- Click "+" in the upper right corner of the "Home" screen or tap "Add device" on the room which has no device.
- Tap the "Window Type Air conditioner" logo.
- Input the password of the Wi-Fi which the same as your smart phone connected, then tap "Next".
- Choose "CF Mode" on the right corner, then follow the instruction on page before or screen to reset the Wi-Fi module, then tap "Next".
- You can see the percent rate of connecting process, at the same time "PP","SA","AP" shining in turn on the indoor display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
[App screenshots for CF mode device addition]
Work office V
Welcome Home
Set your home location for more information
All Devices Living Room Master
Cancel CF Mode
Reset the device first.
CF
Resetting Devices Confirm the device is reset.
Next
Cancel
Select 2.4 Ghz Wi-Fi Network and enter password
2.4GHz 5GHz
******* Password
Next
enter password
Cancel
Adding device...
Ensure that the device is powered on.
2%
Scan devices.
Register on Cloud.
Initialize the devices.
< Add Device
Device added successfully
Sample1
Done
Add device
There are 2 methods to add the device.
2-AP mode
- Power on the indoor unit, no need to launch the air conditioner.
- Click "+" in the upper right corner of the "Home" screen or tap "Add device" on the room which has no device.
- Tap the "Window Type Air Conditioner" logo.
- Input the password of the Wi-Fi which the same as your smart phone connected, then tap "Next".
- Choose "AP Mode" on the right corner, then follow the instruction on page before or screen to reset the Wi-Fi module, then tap "Next".
- Read the instruction carefully and tap "Connect now".
- In the network setting screen, select "SmartLife-****", and tap"< ".
- You can see the percent rate of connecting process, at the same time "PP","SA","AP" shining in turn on the indoor display.
"PP" means "Searching the router"
"SA" means "connected to the router"
"AP" means "connected to the server"
[App screenshots for AP mode device addition]
Work office V
Welcome Home
Set your home location for more information
All Devices Living Room Master
Cancel AP Mode
Reset the device first.
AP Mode
Resetting Devices Confirm the device is reset.
Next
Cancel
Select 2.4 Ghz Wi-Fi Network and enter password
2.4GHz 5GHz
******* Password
Next
enter password
< Connect phone to device's wifi hotspot
1.Please connect your phone to the hotspot shown below
12:30
< Wi-Fi SmartLife-XXXX Home 5G Guest 4G
2.Return to this app and continue adding devices
Connect now
Confirm hot spot connecton,next
< WLAN AVAILABLE NETWORKS WIFI1 SmartLife-**** office wifi
Cancel
Adding device...
Ensure that the device is powered on.
2%
Scan devices.
Register on Cloud.
Initialize the devices.
< Add Device
Device added successfully
Sample1
Done
Air conditioner control
The device control screen will pop up automatically after adding the device. The device control screen will pop up manually by tapping the device name on the home screen.
[App screenshot of Control form 1 interface]
[App screenshot of Control form 2 interface]
Note: There are two different control forms base on different software or Wi-Fi module firmware. Please read the manual carefully base on the real control interface.
Control form1
The main control interface
Back to the Home screen
< Sample2
Device details and management
Turn ON/OFFthe air conditioner
Indicator of setting temperature
Decrease the setting temperature
72
Set Temperature
Selected Mode/Fan speed/ Functions indicator
Increase the setting temperature
Mode Fan Function Timer
Control form1 - Mode setting
- Tap Mode to pop up the Mode screen.
- Select one of the mode Feel/Cool/Heat/Dry/Fan.
- Tap anywhere around the setting temperature to cancel the Mode setting.
[App screenshot for Control form 1 mode selection]
Control form1 - Select fan speed
- Tap Fan to pop up the Fan screen.
- Select one of the fan speed High/med/Low/Auto.
- Tap anywhere around the setting temperature to cancel the selection.
[App screenshot for Control form 1 fan speed selection]
Control form1 - Function setting
- Tap Function to pop up the Function screen.
- Select one of the functions Sleep/Turbo/ECO.
- Select UP-DOWN/LEFT-RIGHT for auto swing with direction of UP-DOWN/LEFT-RIGHT.
- Tap anywhere around the setting temperature to cancel the Function setting.
[App screenshot for Control form 1 function selection]
Control form1 - Timer adding
- Tap Timer to pop up the Add Timer screen.
- Tap Add Timer.
[App screenshot for Control form 1 timer adding]
Control form1 - Timer adding
- Select the time, select the repeat days and Timer on/off.
- Select the Mode/Fan speed/Function and select the setting temperature for Timer on.
- Tap Save to add the timer.
Timer on
Timer off
Timer cancel
Cancel Timer Off
Add Timer
Save
Cancel
Add Timer
Save Timer submit
Hour setting
Minute setting
Select days to use Smart Mode
Weekly setting
Mode setting
Fan Speed setting
Temperature setting
Timer On Timer Off
Timer ON/OFF setting
Control form1 - Timer Management
- Tap the bar of timer to edit the Timer like the Timer adding process.
- Click the switch to enable or disable the Timer.
- Hold the bar of Timer about 3seconds and pop up the Remove Timer screen, tap CONFIRM and remove the Timer.
[App screenshot for Control form 1 timer management]
Air conditioner control
Control form2
The main control interface
Back to the Home screen
Decrease the setting temperature
Selected Functions indicator
Power on/off
Sample1
Cool
77
0
ON/OFF Mode Fan Speed Precision Air Flow
Eco Sleep Timer More
Tips Name of the device
Current mode
Increase the setting temperature
Different backgroundfor different mode: Cool/Heat/Dry/Fan/Auto
Function Buttons
Note: it may appear slightly different , depending on the air conditioner model. Example as below:
Mode Fan Speed Swing Flow
Turbo Eco Sleep Timer
Control form2 - Mode setting
- Tap the Mode button.
- There are 5 modes on the Mode screen, tap one button to set the Air conditioner working mode.
- Tap the X button to back the main control screen.
- The mode and background will change on the screen.
[App screenshots for Control form 2 mode selection]
Note: please read the details of each mode in the user manual to control more comfortable.
Control form2 - Fan speed selection
- Tap the Fan speed button.
- Choose your desired fan speed and tap it.
- Tap the X button to back the main control screen.
- The selected fan speed indicator will appear on the screen.
| Mode | Fan Speed |
| Cool | All speeds |
| Fan | All speeds |
| Dry | |
| Heat | All speeds |
| Auto | All speeds |
Note: Fan Speed can't be adjusted on Dry mode.
[App screenshots for Control form 2 fan speed selection]
Note: Fan Speed screen may appear slightly different , depending on the air conditioner model. Example as below:
Air conditioner control
Control form2 - Air Flow control
- Tap the Precision Air Flow button or Swing Flow button.
- Choose your desired air flow and tap it.
- Tap the X button to back to the main control screen.
- The selected air flow indicator will appear on the screen.
Note: For some models without auto Left-Right wind, If you active it, you will hear a beep, but no any actions.
[App screenshots for Control form 2 airflow selection]
Note: The Main control screen and Air Flow screen may appear slightly different , depending on the air conditioner model. Example as below:
Air conditioner control
Control form2 - ECO function
- For Eco function, just tap the button to activate the function, the button will be lighting and the indicator will appear on the screen.
- Tap again to disable the function.
- Temperature controlled for some air conditioner model: In Cooling mode, the new setting temperature will 78 . In heating mode, the new setting temperature will 77 .
| Mode | ECO enabled |
| Cool | Yes |
| Fan | |
| Dry | |
| Heat | Yes |
| Auto |
ECO is disabled on Fan/ Dry/Auto mode.
[App screenshots for Control form 2 ECO function]
Note: The Main control screen and ECO control method may appear slightly different, depending on the air conditioner model. Example as below:
Control form2 - Sleep function
- Tap the Sleep button.
- Choose your desired sleep mode and tap it.
- Tap the X button to back to the main control screen.
- The selected sleep mode indicator will appear on the screen.
| Mode | Sleep enabled |
| Cool | Yes |
| Fan | |
| Dry | |
| Heat | Yes |
| Auto |
Sleep is disabled on Fan/ Dry/Auto mode.
[App screenshots for Control form 2 sleep function]
Note: The Main control screen may appear slightly different, depending on the air conditioner model. Example as below:
Note: Sleep is disabled on Turbo/Sleep mode too for some air conditioner model..
Air conditioner control
Control form2 - Timer(on) setting
- Tap the Timer button.
- Tap + in the upper right corner of the Timer main screen.
- Choose the Time/Repeat/Switch OFF then tap Save.
- The timer(off) will appear on the Timer main screen.
[App screenshots for Control form 2 timer(on) setting]
Control form2 - Timer(off) setting
- Tap the Timer button.
- Tap + in the upper right corner of the Timer main screen.
- Set the Time/Repeat Date/Switch(ON)/Temperature/Mode/ Fan speed/Air Flow as your desired and then tap Save.
- The timer will appear on the Timer main screen.
[App screenshots for Control form 2 timer(off) setting]
Tap Temperature/Mode/Fan Speed/ Air Flow > oneby one then set as your desired as mentioned on the previous chapter and tap Confirm the setting.
Air conditioner control
Control form2 - Timer management
- Change the Timer setting: Tap anywhere of the timer list bar except the switch bar to get into the Timer setting screen, change the setting and then tap save.
- Enable or Disable the Timer: Tap the left of the switch to disable the Timer. Tap the right of the switch to enable the Timer.
- Delete the Timer: Slide the list bar of the Timer from right to left until Delete button appear, then tap delete.
[App screenshots for Control form 2 timer management]
Air conditioner control
Control form2 - More functions
- Tap the More button to operate additional functions if it appears on the screen.
[App screenshot of Control form 2 More functions menu]
Note: Some air conditioner model don't have the more button.
Note: The appearance maybe different , some icons will be hidden if the air conditional do no have this function or do not enable on the current mode.
- Tap the "Display" button to switch on/off the indoor LED display.
- Tap the "Buzzer" button to switch on/off the buzzing if it is available on the screen.
- Tap the "Anti-Mildew" button to activate the Anti-Mildew function, if it is available on the screen. After AC turning off , it will start drying , reduce residual moisture and prevent mould, after function finish, it will automatically turn off.
- Tap the "Health" button to switch on/off the healthy function, if it is available on the screen. It activate the antibacterial ioniser function.This function only for models with the ioniser generator.
- Tap the "GEN Mode" button, if it is available on the screen. In this Mode, you can choose one of the three levels of current. The air conditioner will maintain proper current to save energy.
Air conditioner control
Control form2 - More functions (continued)
- Tap the "Electricity Monitoring" button if it is available on the screen. In this function, you can monitor the air conditioner electricity consumption.
[App screenshots for Control form 2 Electricity Monitoring]
You can tap this button to pop up the calendar then select the date.
- Tap the "Self-Cleaning" button, if it is available on the screen. Check the details of the Self-Cleaning function on User Manual.
- Tap the "8°C Heat" button , if it is available on the screen. This function help keep the room temperature over 8°C. Check the details of the 8°C Heat function on User Manual.
- Tap the "Reservation" button , if it is available on the screen. You can set the time, repeat day, temperature, mode, fan speed, air flow as you desired and then tap Save to activate the function. The air conditioner will automatically reach your settings at the appointment time.
[App screenshot for Control form 2 Reservation]
After the reservation is set up, the air conditioner will automatically reach your set requirement at your appointment time.
Air conditioner control
Control form2 - More functions (continued)
- Tap the "Self-diagnosis" button, if it is available on the screen. The air conditioner will automatically diagnosis itself and indicate the Error code and the problem instructions if possible.
[App screenshots for Control form 2 Self-diagnosis]
- Tap the "Photosensitive" button if it is available on the screen. This function allow the air conditioner to turn on/off the display automatically according to the light intensity.
- Tap the "Soft Wind" button if it is available on the screen. In this function, the air conditioner will blow soft airflow through the micro holes on the deflector.
Device details and management
Tap on control form1 or tap ... on control form2 , get into the device details screen. Here you can get some useful information and sharing the device to other accounts. Check the following pictures and instructions carefully.
[App screenshots of Control form 1 and 2]
[App screenshot of Details of device screen]
Tap to change the device location to another room
Feed back the problems or some suggestions to the APP administrator.
Tap to check the network status
Tap to check the network status
Tap to got the instruction for connecting the amazon alexa or Google Assistant voice controller
Tap to sharing the device to other account
Tap to check the Virtual ID/Wi-Fi name/IP address MAC address/Time Zone/Wi-Fi single strength
Check and update the firmware
Tap to remove the device and the device will be reset automatically once be deleted.
How to share the devices to other accounts?
- Tap "Device Sharing" and pop up Device Sharing screen.
- Tap "Add Sharing".
- Select the region and enter the account which you want to sharing.
- Tap "Completed", the account will appear on your sharing list.
- The received sharing members should hold pressing the home screen and slide down to refresh the device list, the device will appear on the device list.
[App screenshots for device sharing]
Hold the bar about 3s then you can delete the sharing account.
Hold on and slide down to refresh the device list
Account management
Account Profile setting
[App screenshots for Account Profile setting]
Change the nick name of your account
Edit name
Cancel Save
Select a picture for the account from local album
Select the time zone
Change the password like reset password on page7
Tap the switch to enable or disable the Pattern password
Please carefully to deactivate the account for all data will be deleted.
Home(Family) management
- Tap the name of home at the left upper corner of the Home Screen and select the Home Management. Or tap Me and tap Home Management.
- Tap one of the families in the family list and get into Family Settings screen.
[App screenshots for Home(Family) management]
Tap "Add family" and refer to page 6 to add a new family
Open the map automatically then you can set the location
Add other account into this family to control the device
Tap to rename the family name
Tap to get into Room Management
Tap to set a name and select picture for the family member
Remove the Family from your account
Notice
1. For technical update, there is maybe deviation of the actual items from what is on the manual. We express our apologies. Please refer to your actual product and APP.
2. Smart air conditioner APP can be altered without notice for quality improvement and also be deleted depending on the circumstances of manufacturing firms .
3. In case Wi-Fi signal strength is weakened, smart App may be disconnected. So make sure the indoor unit near to wireless router.
4. DHCP server function should be activated for wireless router.
5. The internet connection may fail because of a firewall problem. In this case, contact your internet service provider.
6. For smart phone system security and network setting, make sure Smart air conditioner APP is trusted.
Trouble Shooting
| Description | Analysis of cause |
| Air conditioner can't be configured successfully | 1. Check the mobile connected WLAN router SSID and password is correct; 2. Check whether there are additional settings of WLAN router as shown below. 1) Firewall by router itself or by PC 2) MAC address filtering 3) Hidden SSID 4)DHCP server Reboot WLAN router, mobile device and air conditioner (WLAN module) and connect air conditioner by CF mode again. Before rebooting, check nobody has already connected to same air conditioner. |
| Mobile can't control air conditioner | 1. When air conditioner (WLAN module) is rebooted and app displays Device remove, ignoring this confirmation will lead to mobile device losing control permission of the air conditioner. You will need to connect the air conditioner by CF mode again. 2. In case of power failure, mobile device will lose control permission of air conditioner for 3 minutes after power failure. (Notification will now show up on the mobile device.) If you cannot control the app (air conditioner) even after power restored, you will need to connect the air conditioner by CF mode again. |
| Mobile can't find air conditioner | 1. App display Air conditioner Device offline. Please check the following conditions. 1)The air conditioner has been reconfigured. 2)Air conditioner out of power. 3)Router out of power. 4)Air conditioner can't connect to router. 5)Air conditioner can't connect to network through the router. 6)Mobile device can't connect to network. 2. After adding the device, it disappears in device list. Hold and slide down to refresh the device list. If it has no change, shut down the app and start again. |
