ROVSUN Wi-Fi Function User Manual

Let's get start!

Operation guideline

Note: If you registered the account and added the device before, when you re-install the APP again and login, the added device will remain.

Wi-Fi Module specification and basic information

1. Minimum specifications on a Smart phone:
   Android 5.0 version or higher
   IOS 9.0 version or higher
2. Basic parameters for Wi-Fi module

   Parameters	Details
   Network frequency	2.400-2.500GHz
   Standards of WLAN	IEEE 802.11 b/g/n(channels 1-14)
   Protocol stack support	IPv4/IPv6/TCP/UDP/HTTPS/TLS/MulticastDNS
   Security support	WEP/WPA/WPA2/AES128
   Network type support	STA/AP/STA+AP

3. Installation guide for USB WiFi only
   

   A diagram shows the installation of a USB Wi-Fi module.

Download and Install the App

For Android smart phone:

1. Method 1: Scan the QR code with a browser scanner, download and install the APP.
2. Method 2: Open Google Play Store on your smartphone and search "SmartLife-SmartHome", download and install the APP.

For iOS smartphone:

1. Method 1: Scan the QR code and follow the tips to get into the AppStore, download and install the APP.
2. Method 2: Open the Apple AppStore on your smartphone and search "SmartLife-SmartHome", download and install the APP.

Note: Please enable the permissions for Storage/Location/Camera for this APP when installing. Otherwise, it will have some problems when operating.

Activate APP

The first time the app is used, it will need activating.

1. Launch the APP "SmartLife-SmartHome" on your smartphone.
2. Method 1: Tap button "Scan" and scan the Activate QR code.
3. Method 2: Tap "or Enter Activation Code" at the bottom of the screen, then enter the activate code and tap "CONFIRM".

Note: Without the QR code or activation code, you can't activate the APP and use it. Please keep them safe.

Registration

1. If you don't have an account, please tap the "Register" button.
2. Read the Privacy Policy and tap "Agree".
3. Tap ">" and choose the country.
4. Enter your e-mail address.
5. Tap the button "Get Verification code".

A diagram shows the registration process, including selecting a country and entering an email address.

Registration (Continued)

1. Enter the verification code you received from e-mail.
2. Set the Password with 6-20 characters including characters and numbers.
3. Tap "Done".

Login

1. Tap "Log in with existing account".
2. Enter your registered account and password.
3. Tap the "Log in" button.

A diagram illustrates the login screen.

Login (Continued)

The first time the APP is used, Create family is needed:

1. Tap "Create family".
2. Make a name for the family.
3. Set the location.
4. Choose default rooms or add new rooms.
5. Tap "Done" and "Completed".

A diagram shows the process of creating a family and adding rooms.

Note: The app can open the map on your phone and you can set the location where you are.

Add device

There are 2 modes: CF (Quick connection) and AP (Access Point) for adding devices.

CF mode

1. Power on the indoor unit; no need to launch the air conditioner.
2. Click "+" in the upper right corner of the "Home" screen or tap "Add device" on the room which has no device.
3. Tap the "Split Air conditioner" logo.
4. Input the password of the Wi-Fi which is the same as your smartphone connected, then tap "Next".
5. Choose "CF Mode" on the right corner, then follow the instruction on the page before or screen to reset the Wi-Fi module, then tap "Next".
6. You can see the percent rate of connecting process. At the same time, "PP", "SA", "AP" shine in turn on the indoor display.
   "PP" means "Searching the router".
   "SA" means "connected to the router".
   "AP" means "connected to the server".

Diagrams illustrate the CF mode connection process.

AP mode

1. Power on the indoor unit; no need to launch the air conditioner.
2. Click "+" in the upper right corner of the "Home" screen or tap "Add device" on the room which has no device.
3. Tap the "Split Air Conditioner" logo.
4. Input the password of the Wi-Fi which is the same as your smartphone connected, then tap "Next".
5. Choose "AP Mode" on the right corner, then follow the instruction on the page before or screen to reset the Wi-Fi module, then tap "Next".
6. Read the instruction carefully and tap "Connect now".
7. In the network setting screen, select "SmartLife-****", and tap "< ".
8. You can see the percent rate of connecting process. At the same time, "PP", "SA", "AP" shine in turn on the indoor display.
   "PP" means "Searching the router".
   "SA" means "connected to the router".
   "AP" means "connected to the server".

Diagrams illustrate the AP mode connection process.

Air conditioner control

The device control screen will pop up automatically after adding the device. The device control screen will pop up manually by tapping the device name on the home screen.

Control form1

Diagrams show the main control interface for Control Form 1.

Note: There are two different control forms based on different software or Wi-Fi module firmware. Please read the manual carefully based on the real control interface.

Control form1-Mode setting

1. Tap Mode to pop up the Mode screen.
2. Select one of the modes: Feel/Cool/Heat/Dry/Fan.
3. Tap anywhere around the setting temperature to cancel the Mode setting.

Control form1-Select Wind Speed

1. Tap Fan to pop up the Fan screen.
2. Select one of the fan speeds: High/med/Low/Auto.
3. Tap anywhere around the setting temperature to cancel the selection.

Control form1-Function setting

1. Tap Function to pop up the Function screen.
2. Select one of the functions: Sleep/Turbo/ECO.
3. Select UP-DOWN/LEFT-RIGHT for auto swing with direction of UP-DOWN/LEFT-RIGHT.
4. Tap anywhere around the setting temperature to cancel the Function setting.

Control form1-Timer adding

1. Tap Timer to pop up the Add Timer screen.
2. Tap Add Timer.
3. Select the time, select the repeat days and Timer on/off.
4. Select the Mode/Fan Speed/Function and select the setting temperature for Timer on.
5. Tap Save to add the timer.

Diagrams illustrate timer settings.

Control form1-Timer Management

1. Tap the bar of timer to edit the Timer like the Timer adding process.
2. Click the switch to enable or disable the Timer.
3. Hold the bar of Timer for about 3 seconds and pop up the Remove Timer screen, tap CONFIRM and remove the Timer.

Control form2

Diagrams show the main control interface for Control Form 2.

Control form2-Mode setting

1. Tap the Mode button.
2. There are 5 modes on the Mode screen; tap one button to set the Air conditioner working mode.
3. Tap the X button to back to the main control screen.
4. The mode and background will change on the screen.

Note: Please read the details of each mode in the user manual to control more comfortably.

Control form2-Fan speed selection

1. Tap the Fan speed button.
2. Choose your desired fan speed and tap it.
3. Tap the X button to back to the main control screen.
4. The selected fan speed indicator will appear on the screen.

Note: Fan Speed can't be adjusted on Dry mode.

Note: Fan Speed screen may appear slightly different, depending on the air conditioner model.

Control form2-Air Flow control

1. Tap the Precision Air Flow button or Swing Flow button.
2. Choose your desired air flow and tap it.
3. Tap the X button to back to the main control screen.
4. The selected air flow indicator will appear on the screen.

Note: For some models without auto Left-Right wind, if you activate it, you will hear a beep, but no any actions.

Diagrams illustrate air flow control options.

Control form2-ECO function

1. For Eco function, just tap the button to activate the function; the button will be lighting and the indicator will appear on the screen.
2. Tap again to disable the function.
3. Temperature controlled for some air conditioner models:
   In Cooling mode, the new setting temperature will be ≥ 78°F.
   In heating mode, the new setting temperature will be ≤ 77°F.

Note: ECO is disabled on Fan/Dry/Auto mode.

Note: ECO is disabled on Turbo/Sleep mode too for some air conditioner models.

Control form2-Sleep function

1. Tap the Sleep button.
2. Choose your desired sleep mode and tap it.
3. Tap the X button to back to the main control screen.
4. The selected sleep mode indicator will appear on the screen.

Note: Sleep is disabled on Fan/Dry/Auto mode.

Note: Sleep is disabled on Turbo/Sleep mode too for some air conditioner models.

Control form2-Timer(on) setting

1. Tap the Timer button.
2. Tap + in the upper right corner of the Timer main screen.
3. Choose the Time/Repeat/Switch OFF then tap Save.
4. The timer(off) will appear on the Timer main screen.

Diagrams illustrate timer settings.

Control form2-Timer(off) setting

1. Tap the Timer button.
2. Tap + in the upper right corner of the Timer main screen.
3. Set the Time/Repeat Date/Switch(ON)/Temperature/Mode/Fan speed/Air Flow as your desired and then tap Save.
4. The timer will appear on the Timer main screen.

Tap Temperature/Mode/Fan Speed/Air Flow > one by one then set as your desired as mentioned on the previous chapter and tap Confirm the setting.

Control form2-Timer management

1. Change the Timer setting: Tap anywhere of the timer list bar except the switch bar to get into the Timer setting screen, change the setting and then tap save.
2. Enable or Disable the Timer: Tap the left of the switch to disable the Timer. Tap the right of the switch to enable the Timer.
3. Delete the Timer: Slide the list bar of the Timer from right to left until Delete button appears, then tap delete.

Control form2-More functions

1. Tap the More button to operate additional functions if it appears on the screen.
2. Tap the "Display" button to switch on/off the indoor LED display.
3. Tap the "Buzzer" button to switch on/off the buzzing if it is available on the screen.
4. Tap the "Anti-Mildew" button to activate the Anti-Mildew function, if it is available on the screen. After AC turning off, it will start drying, reduce residual moisture and prevent mould; after function finish, it will automatically turn off.
5. Tap the "Health" button to switch on/off the healthy function, if it is available on the screen. It activates the antibacterial ioniser function. This function is only for models with the ioniser generator.
6. Tap the "GEN Mode" button, if it is available on the screen. In this Mode, you can choose one of the three levels of current. The air conditioner will maintain proper current to save energy.
7. Tap the "Electricity Monitoring" button if it is available on the screen. In this function, you can monitor the air conditioner electricity consumption.
8. Tap the "Self-Cleaning" button, if it is available on the screen. Check the details of the Self-Cleaning function on User Manual.
9. Tap the "8°C Heat" button, if it is available on the screen. This function helps keep the room temperature over 8°C. Check the details of the 8°C Heat function on User Manual.
10. Tap the "Reservation" button, if it is available on the screen. You can set the time, repeat day, temperature, mode, fan speed, air flow as you desired and then tap Save to activate the function. The air conditioner will automatically reach your settings at the appointment time.
11. Tap the "Self-diagnosis" button, if it is available on the screen. The air conditioner will automatically diagnose itself and indicate the Error code and the problem instructions if possible.
12. Tap the "Photosensitive" button if it is available on the screen. This function allows the air conditioner to turn on/off the display automatically according to the light intensity.
13. Tap the "Soft Wind" button if it is available on the screen. In this function, the air conditioner will blow soft airflow through the micro holes on the deflector.

Device details and management

Tap on control form1 or tap on control form2, get into the device details screen. Here you can get some useful information and sharing the device to other accounts. Check the following pictures and instructions carefully.

Diagrams show accessing device details and management options.

How to share the devices to other accounts?

1. Tap "Device Sharing" and pop up Device Sharing screen.
2. Tap "Add Sharing".
3. Select the region and enter the account which you want to sharing.
4. Tap "Completed"; the account will appear on your sharing list.
5. The received sharing members should hold pressing the home screen and slide down to refresh the device list; the device will appear on the device list.

Account management

Account Profile setting

Diagrams illustrate profile settings, including nickname, account security, and pattern unlock.

Home(Family) management

1. Tap the name of home at the left upper corner of the Home Screen and select the Home Management. Or tap Me and tap Home Management.
2. Tap one of the Homes in the Home list and get into Home Settings screen.
3. Set the Home as the following indicators.

Diagrams show home settings, including renaming the home, room management, and adding members.

Notice

1. For technical updates, there may be deviations of the actual items from what is on the manual. We express our apologies. Please refer to your actual product and APP.
2. Smart air conditioner APP can be altered without notice for quality improvement and also be deleted depending on the circumstances of manufacturing firms.
3. In case Wi-Fi signal strength is weakened, smart App may be disconnected. So make sure the indoor unit is near to the wireless router.
4. DHCP server function should be activated for the wireless router.
5. The internet connection may fail because of a firewall problem. In this case, contact your internet service provider.
6. For smart phone system security and network setting, make sure Smart air conditioner APP is trusted.

Trouble Shooting