Components for system solutions

MCB Miniature circuit breaker

8530/1-MCB-STA103-C16-500-4 Art. No. 293900

Product Features

Isolation function in accordance with EN60947-2
Energy limitation class 3
Simple replacement or expansion of system thanks to modular circuit breaker design
Simple installation - snaps onto the mounting rail in Ex e enclosures
Non-adjustable thermal and magnetic releases
Ergonomically shaped operating lever for safe switching on and off
Padlocks (Accessories) provide protection against being switched on again during maintenance work

MY R. STAHL 8530A [Explosive atmosphere protection]

R. STAHL 8530 series miniature circuit breakers are overcurrent devices with good current limiting for short circuits and high switching capacity (10, 15, or 25 kA). They offer low load on cables and high selectivity for upstream fuses. The components have a modular design and are available in 1- to 4-pole versions for rated currents of 0.5-63 A. The maximum installation capacity is 4.5 subunits.

Technical Data

Explosion Protection

Application range (zones): 1, 2
Application range (Zone) note: For use in Zone 21/22 when protected by Ex tb/tc enclosure
IECEX gas certificate: IECEx FMG 19.0029U
IECEx gas explosion protection: Ex db eb IIC Gb
ATEX gas certificate: FM19ATEX0191U
ATEX gas explosion protection: II 2 G Ex db eb IIC Gb
Certificates: ATEX (FM), Brazil (ULB), China (CQST), IECEx (FM)
Declaration of conformity: Certificate of conformity (ATEX)

Electrical Data

Rated operational voltage AC	230/400 V
Rated operational current	16 A
Frequency	50/60 Hz
Rated switching capacity	10 kA
Electrical service life	2 x 10⁴
Mechanical service life	2 x 10⁴
1st auxiliary function	Auxiliary contact 1 change-over contact + fault signal contact 1 change-over contact
1st auxiliary function for AC rated voltage	230 V
1st auxiliary function for rated current max.	2 A
2nd auxiliary function	without
2nd auxiliary function voltage max. DC	-
Tripping characteristic	C
No. of poles	3-pole

Ambient Conditions

Ambient temperature: -40 °C ... 70 °C
Ambient temperature: -40 °F ... 158 °F
Ambient temperature note: Deviating ambient temperatures based on current certificates available on request

Mechanical Data

Degree of protection (IP) (IEC 60529): IP2X
Enclosure material: Thermoplast
Connection cross section min.: 1.5 mm²
Connection cross-section max.: 25 mm²
Connection cross-section AWG min.: 16 AWG
Connection cross-section AWG max.: 4 AWG
Connection cross-section 2 min.: 1.5 mm²
Connection cross-section 2 max.: 10 mm²
Connection cross-section 2 AWG min.: 16 AWG
Connection cross-section 2 AWG max.: 8 AWG
Min. aux. cont. con. cr.-sect.: 0.5 mm²
Max. aux. cont. conn. cr.-sec.: 4 mm²
Min. aux. co. con. cr.-se. AWG: 18 (unece.unit.AWG)
Connection cross-section of auxiliary contact AWG max.: 14 (unece.unit.AWG)
Min. tightening torque: 2 N·m
Max. tightening torque: 3 N·m
Connection cross-section note: 2-conductor connection (upper and lower chamber at the same time): upper and lower chamber max. 16/10 mm² (A maximum difference of one cross section may be clamped between the upper and lower chamber.) The permitted combinations of connection cross-sections can be found in the operating instructions.

Dimensions

Width: 110 mm (4.33 in)
Length: 165 mm (6.5 in)
Mounting depth: 138.3 mm (5.44 in)
Weight: 1.8 kg (3.969 lb)

Mounting / Installation

Tightening torque: 2-3 N·m (17.7 to 26.6 lbf·in)
Tightening torque auxiliary contact: 0.4–0.6 N·m (3.5 to 5.3 lbf·in)

Technical Drawings

Tripping Curve: The document includes a tripping curve graph showing the relationship between multiple of rated current and tripping time for tripping characteristic C, for both AC and DC.

Dimensional Drawings: The document provides detailed dimensional drawings of the circuit breaker, including front, side, and top views, with dimensions in millimeters and inches. It also shows the arrangement for 3-pole with auxiliary contacts.

Accessories

4-way locking device

A lock-out/tag-out hasp for individually locking the component using up to four cylinder locks.

Art. No.: 227232

Cylinder lock

For closing (bracket Ø 3)
Art. No.: 107115

Fastening set

A fastening set for fastening the component on the mounting plate without a DIN rail.

Art. No.: 276618

Note: R. STAHL reserves the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding.

	R. STAHL LS Miniature Circuit Breaker 8530/1-MCB-STA103-C16-500-4 - Technical Data and Features Detailed technical specifications and features of the R. STAHL LS Miniature Circuit Breaker, model 8530/1-MCB-STA103-C16-500-4. Includes information on explosion protection, electrical data, mechanical data, and accessories.
	R. STAHL 8530/1-MCB-STA103-C16-500-4 Circuit Breaker: Technical Specifications and Features Detailed technical specifications, features, and dimensions for the R. STAHL 8530/1-MCB-STA103-C16-500-4 circuit breaker, including explosion protection, electrical characteristics, and mounting information.
	R. STAHL 8530/1-MCB-STA103-C16-500-4 Circuit Breaker Technical Data Technical specifications and features of the R. STAHL 8530/1-MCB-STA103-C16-500-4 circuit breaker, including explosion protection, electrical data, mechanical data, and accessories.
	R. STAHL 8530/1-MCB-STA103-B16-500-4 Miniature Circuit Breaker - Technical Data Detailed technical specifications and features of the R. STAHL 8530/1-MCB-STA103-B16-500-4 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and accessories.
	R. STAHL 8530/1-MCB-STA103-C50-500-4 Miniature Circuit Breaker Technical Data Detailed technical specifications and features of the R. STAHL 8530/1-MCB-STA103-C50-500-4 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and accessories.
	R. STAHL 8530/1-MCB-STA103-C63-500-4 Miniature Circuit Breaker - Technical Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA103-C63-500-4 Miniature Circuit Breaker, including features, electrical characteristics, environmental conditions, and dimensions. Suitable for explosion protection applications.
	R. STAHL Miniature Circuit Breaker 8530/1-MCB-STA103-C25-500-4: Technical Specifications and Features Detailed technical specifications, features, and accessories for the R. STAHL 8530 series miniature circuit breaker (MCB), model 8530/1-MCB-STA103-C25-500-4. Includes information on explosion protection, electrical data, mechanical data, and mounting.
	R. STAHL 8530/1-MCB-STA101-C16-500-2 Miniature Circuit Breaker - Technical Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA101-C16-500-2 Miniature Circuit Breaker, including electrical data, mechanical data, explosion protection, and accessories. This device is designed for system technology applications.