SWIVEL PANEL INSTALLATION GUIDE

SAFETY

• Handle glass with great care. Although the glass is very tough, sharp impacts can damage both the glass and metal frame.
• Make sure there are no hidden pipes or cables hidden in the wall where you intend to drill.
• Wear safety goggles, shoes and appropriate clothing.

BEFORE INSTALLATION

• Check that the shower tray is level in all directions. The enclosure will not sit correctly on an uneven surface. If uneven, the wall channels may not fit and the doors may not shut correctly.
• The enclosure should be fitted on tiled walls which are sealed with waterproof grout.
• There must be a good silicone seal between the rim of the shower tray and the wall.
• The shower tray and the enclosure must match in size. Attempting to fit the incorrect size of enclosure to the shower tray will result in water leaks.
• Always check very carefully that components are vertical.
• To avoid damage, use the opened out packaging to build the enclosure on.

Equipment needed: Silicone Sealant.

STAGE 1

A diagram illustrating a frameless swivel panel, showing its rectangular shape and a pivot mechanism at the top and bottom, indicating its ability to swing.

Two diagrams show the swivel panel, one for left-hand and one for right-hand installation. Both indicate 'THIS WAY UP OUTSIDE' and feature arrows demonstrating the panel swinging inward across the shower tray area. The text notes the product is reversible and no brackets need to be removed to change handing.

NOTE: Ensure swivel panel swings inward across the tray area. If swivel panel swings outward, the panel is installed in the incorrect handing.

STAGE 2

Detailed diagrams illustrate the installation process.

• 1A/1B: Show the profile and glass sides, with red lines indicating where sealant is applied.
• 1C: Highlights a wedge gasket, specifying that its three fins should face the glass.
• 1D: Shows the bottom of the panel with a seal.

Please note the side of the wedge gasket with the 3 fins should be faced towards the glass.

STAGE 3

Diagrams depict the final installation stages. Sealant is shown applied to the bottom seal and wall channels. ⏳ 24 hours curing time is indicated, and ❌ Do not use shower for 24 hours is advised.

PARTS LIST

Swivel Panel

A visual representation of the Swivel Panel, with three numbered components: 1. Swivel panel, 2. Wedge gasket for swivel panel, 3. Bottom seal.

(Note: The table indicates a Swivel Panel Size of '300' which is not explicitly in a row but seems to be a header or annotation for the table.)