Triton Velino Bar Diverter Installation & Registration Guide

Brand: Triton

Product Model Numbers: 86006250, 86006450, 86006530

Certification: Certified to NSF TMV2

Installation & User Guide Access

For the complete Installation & User Guide, including on-site test methods and frequency, please visit the Triton website:

tritonshowers.co.uk/velinodiverterguide

Alternatively, you can obtain the guide by contacting Triton customer support:

Email: CXsupport@tritonshowers.co.uk
Telephone: 024 7637 8327

Product Registration & Guarantee Offer

Additionally, by registering online, you can enter a prize draw to WIN £100 of retail vouchers.

Register Online: tritonshowers.co.uk/register

Note: Product registration is only available for units purchased and installed in the UK.

Alternative Registration by Telephone: 024 7637 8321

For your Service Reference: Please note down the product code from the label on the front or top of the box.

Important Safety Information

Please Read Carefully.

Triton products are designed to be safe and without risk when installed, used, and maintained correctly according to the provided instructions and recommendations.

Site Requirements

Installation must comply with water supply (water fittings) regulation 1999 and/or local Bylaws.
Maximum static pressure: 10 Bar
Hot supply temperature: 55°C to 65°C
Cold supply temperature: Equal to or less than 25°C
Valves operating outside these specified conditions cannot be guaranteed by the Scheme to operate as Type 2 valves.
Hot and cold water dynamic supply pressure: Refer to the installation guide for specific requirements.

TMV Designation

HP-S High Pressure Shower

Outlet Temperature Control

The mixed water temperature must never exceed 46°C.

Plumbing Requirements & Restrictions

DO NOT install the mixer shower in a location where it could freeze.
DO NOT connect to any tap or fitting not recommended by Triton.
DO NOT use jointing compounds on any pipe fittings during installation.
DO NOT solder fittings near the mixer shower, as heat can transfer along the pipework and damage components.
DO NOT subject the mixer shower to a water temperature above 80°C during installation, use, maintenance, or disinfection.

Pipework & Inlet Requirements

The layout and sizing of pipework MUST ensure that nominally equal inlet supply pressures are achieved and that the effects of other draw-offs are minimised.
The hot water pipe entry MUST be made to the left-hand side inlet, marked as HOT, H, or with a red/orange label.

Isolating Valves

Suitable isolating valves (complying with Water Regulations and Bylaws) MUST be fitted on both the hot and cold water supplies.
These valves serve as an independent means of isolating the water supplies for maintenance or servicing.
Position these valves as close as practicable to the water supply inlets of the mixer shower.
If an isolator is fitted in a loft space, ensure the loft has a fixed access ladder, is boarded, and has appropriate lighting from the access point to the isolator.

Installation Procedure

The full fitting and operating instructions for your mixer shower are available in the online book.

The shower installation MUST be carried out by a suitably qualified person, following the sequence detailed in the instruction book.

Proper installation care will ensure a long and trouble-free life for your shower.

Environmental Contribution

By registering and accessing installation & user guides online, you contribute to saving approximately 25 tonnes of paper annually, equivalent to over 500 trees per year.

	Triton Neo Frameless Swivel Panel Installation Guide Step-by-step installation guide for the Triton Neo Frameless Swivel Panel, including safety precautions, pre-installation checks, and parts list. Learn how to correctly fit your shower panel for optimal performance and water sealing.
	Triton Elina Sequential Built-in Thermostatic Mixer Valve Installation and Operating Guide Comprehensive installation, operation, and maintenance guide for the Triton Elina sequential built-in thermostatic mixer valve (model 86002260). Covers site requirements, plumbing, fitting, commissioning, testing, and troubleshooting.
	Triton Omnicare Ultra Thermostatic Electric Shower - Technical Specifications Detailed technical specifications for the Triton Omnicare Ultra Thermostatic Electric Shower, including product codes, installation, commissioning, and end-user features. Learn about its safety, performance, and design.
	Triton 2400W Dual Mode Precision Plunge Router TRA002 Operating & Safety Instructions This document provides operating and safety instructions for the Triton 2400W Dual Mode Precision Plunge Router (Model TRA002). It covers product features, safety warnings, specifications, and usage guidelines.
	Triton 3/8 Inch Tie Down Kit - Customer Instruction Sheet Customer instruction sheet for the Triton 3/8 inch Tie Down Kit (Kit No. 11242). Includes a detailed parts list and a textual description of the assembly diagram for mounting brackets, bolts, washers, and nuts.
	Triton Power Pool Lift Installation, Assembly, and Operation Instructions Comprehensive guide for installing, assembling, and operating the Triton Power Pool Lift, including safety instructions, troubleshooting, and maintenance.
	Triton TA1200BS 1200W Belt Sander: Operating and Safety Instructions This manual provides essential operating and safety instructions for the Triton TA1200BS 1200W Belt Sander. It covers product familiarisation, safe usage guidelines, maintenance procedures, troubleshooting tips, and technical specifications for effective and secure operation.
	Triton Maxi Sliding Extension Table ETA 300: Operating and Safety Instructions Comprehensive operating and safety instructions for the Triton Maxi Sliding Extension Table ETA 300, covering assembly, usage, safety precautions, and guarantee information.