IKEA VÅGLIG Front Connection System Assembly Instructions

This document provides assembly instructions for the IKEA VÅGLIG front connection system, designed to attach various kitchen cabinet fronts to appliances or cabinets.

Tools Required

• Screwdriver [screwdriver]
• Tape measure [tape measure]
• Pencil [pencil]

Parts List

• 10x Screw (Part #100344)
• 14x Screw (Part #10095316)
• 2x Screw (Part #10095297)
• 8x Screw (Part #144717)
• 16x Screw (Part #117687)
• 2x Screw (Part #10075024)
• 2x Screw (Part #128579)
• 2x Metal Rail (Part #10003587)
• Various brackets and specific screws for different front types (detailed in later steps).

General Assembly Notes

Always assemble on a soft surface to prevent scratches. Do not overtighten screws. If you encounter issues, contact IKEA customer support [customer support].

Assembly Steps

Main Frame Assembly

The following steps detail the assembly of the core VÅGLIG connection system, typically involving attaching metal rails to cabinet panels.

Step 1

Attach one metal rail (Part #10003587) to a panel. Use 4x screws (Part #100344). Position the rail approximately 39 mm from the edge of the panel. Ensure screws are inserted correctly [correct] and not overtightened [do not].

Step 2

Slide a component onto the attached metal rail. A directional arrow [direction arrow] indicates the sliding motion.

Step 3

Attach another panel to the metal rail. Use screws (e.g., Part #117687). Position the rail approximately 39 mm from the edge of this panel.

Step 4

Slide another component onto the metal rail.

Step 5

Attach panels using screws (e.g., Part #100344).

Step 6

Slide component onto the rail.

Step 7

Attach panels using screws (e.g., Part #100344).

Step 8

Secure panels with screws (e.g., Part #100344).

Step 9

Final screw attachment. Includes a disposal icon [disposal] for packaging.

Subsequent steps (Steps 1 through 7 on pages 10-23, and similar sequences on pages 25-27) involve repeating these attachment processes, potentially for the other side of the cabinet or for different configurations, using various screws and ensuring precise measurements (e.g., 39 mm, 61 mm, 3.5 mm, 3.0 mm, 24 mm).

Attaching Cabinet Fronts

The VÅGLIG system is designed to connect various IKEA kitchen fronts. The following are examples of front types and their general attachment methods:

VOXTORP Front

Attach the VOXTORP front panel using 2x screws to the pre-assembled VÅGLIG system.

DISKAD PROFFSIG TORSBODA KALLBODA Front

Attach this front type using specific brackets and screws (e.g., Part #144717, Part #10075024) to the VÅGLIG system.

HYGIENISK RENODLAD LAGAN Front

Attach this front type using specific brackets and screws (e.g., Part #100400) to the VÅGLIG system.

RENGÖRA Front

Attach this front type using specific brackets (BL/BR) and screws (e.g., Part #128579) to the VÅGLIG system.

TILLREDA VILLBODA Front

Attach this front type using specific brackets and screws (e.g., Part #10075024) to the VÅGLIG system.

TILLREDA TALLBODA Front

Attach this front type using specific brackets and screws (e.g., Part #144717) to the VÅGLIG system.

Dishwasher Programs

The document also illustrates dishwasher programs and control panel icons for different models:

• DISKAD PROFFSIG TORSBODA KALLBODA
• HYGIENISK RENODLAD LAGAN
• RENGÖRA
• TILLREDA VILLBODA (with programs like Eco, Auto, Hygiene, Super, Quick, Prewash)
• TILLREDA TALLBODA (with similar program indicators)

The assembly process involves carefully aligning rails and panels, using the correct screws for each step, and ensuring precise measurements for proper function.