IKEA VÅGLIG Dishwasher Front Connecting Rail Assembly Instructions
This document provides step-by-step instructions for assembling and installing the IKEA VÅGLIG connecting rail system, designed for dishwasher fronts. It includes a list of parts, required tools, and detailed descriptions of each assembly stage.
Brand: IKEA
Product Type: Kitchen Appliance Accessory / Dishwasher Front Mounting Hardware
Keywords: IKEA VÅGLIG, dishwasher front rail, connecting rail, assembly instructions, installation guide, kitchen hardware, 80518193, 105344, 100344, 144717, 128579, 100400, 117687, 10003587, 10095297, 10095316, METOD, DISKAD, PROFFSIG, KALLBODA, TORSBODA, HYGIENISK, RENODLAD, LAGAN, RENGÖRA, RÅGLANDA, GALMESÅS, VOXTORP, UPPLÖV
Product Overview & Preparation
This guide details the assembly of the IKEA VÅGLIG connecting rail system. Please ensure you have all parts and tools before beginning.
Tools Required:
- ? Phillips head screwdriver
- ? Flat head screwdriver
- ✏️ Pencil
- ? Measuring tape
Important Notes:
- ℹ️ Read all instructions carefully before assembly.
- ❌ Avoid using power drills for steps where manual screwing is indicated.
- ?️ Dispose of any excess hardware responsibly.
- ? For assistance, please contact IKEA customer support.
Parts Included
- Screw (105344) (10x)
- Screw (100344) (14x)
- Screw (144717) (8x)
- Screw (128579) (16x)
- Screw (100400) (2x)
- Part (117687) (2x)
- Part (10003587) (4x)
- Connecting Rail (10095297) (1x)
- Connecting Rail (10095316) (1x)
The document references various dishwasher front panel types and models, including DISKAD PROFFSIG KALLBODA TORSBODA, HYGIENISK RENODLAD LAGAN, RENGÖRA RÅGLANDA, GALMESÅS, VOXTORP, and UPPLÖV. The following steps focus on the assembly of the VÅGLIG rail system itself.
Core Frame Assembly
This section details the assembly of the main connecting rail structure.
Step 1
Place the connecting rails (10095297 and 10095316) onto a base panel. Align the rails with the pre-drilled holes. Use 4x screws (100344) to attach the rails. Refer to the [detail view] for precise placement and orientation. Measurements of approximately 61 mm and 39 mm are indicated for alignment.
Step 2
Insert 2x parts (117687) into the designated slots on the assembled section. [Slide] the next panel into place, aligning it with the inserted parts.
Step 3
Attach another panel. Use 2x screws (100344) to secure the panel. Ensure alignment at approximately 39 mm from the edge.
Step 4
Insert 2x parts (117687) into the designated slots. [Slide] the next panel into place.
Step 5
Attach another panel. Use 4x screws (100344) to secure the panel. Ensure alignment at approximately 39 mm from the edge.
Step 6
Insert 2x parts (117687) into the designated slots. [Slide] the next panel into place.
Step 7
Attach another panel. Use 4x screws (100344) to secure the panel. Ensure alignment at approximately 39 mm from the edge.
Step 8
Secure the assembly further. Use 4x screws (105344) to fasten components. The [detail view] illustrates the screw insertion process.
Step 9
Finalize attachment. Use 4x screws (105344) to secure the assembly. [Discard] any leftover screws into the trash bin ?️.
Panel Marking and Positioning
These steps involve preparing and positioning the panels before final attachment.
Step 1 (Marking)
Mark reference points on the panel using a pencil, indicated by 'X' marks. These are crucial for accurate alignment.
Step 2 (Positioning)
Use the marked points to align the assembly. Measurements of 3.5 mm and 3.0 mm are indicated for precise positioning relative to edges or other components.
Step 3 (Alignment)
Align the main assembly with the panel, ensuring the rails (10095297, 10095316) are correctly positioned. A measurement of 24 mm from an edge is indicated for rail placement.
Dishwasher Front Panel Attachment Options
The following sections describe how to attach different types of dishwasher front panels to the VÅGLIG rail system. Select the section corresponding to your specific front panel model.
Option 1: DISKAD PROFFSIG KALLBODA TORSBODA
Step A: Attach 4x parts (10003587) to the main assembly. The [detail view] shows the correct placement.
Step B: Use 2x screws (144717) to connect components. The [detail view] shows screw insertion.
Step C: Use 2x screws (144717) to connect additional components.
Option 2: HYGIENISK RENODLAD LAGAN
Step A: Attach 2x parts (100400) and 2x parts (100400) to the main assembly. Secure them using 2x screws (100400). The [detail view] shows screw insertion.
Step B: Use 2x screws (144717) to connect components. The [detail view] shows screw insertion.
Option 3: RENGÖRA LAGAN RÅGLANDA
Step A: Attach parts labeled BL (4x) and BR (1x) using screws (128579). The [detail view] illustrates correct and incorrect attachment methods.
Step B: Use 2x screws (128579) to connect components. The [detail view] shows screw insertion.
Step C: Attach screws (144717) to connect the BL and BR parts to the main assembly.
Option 4: GALMESÅS
Step A: Attach 2x parts (100400) and 2x parts (100400) to the main assembly. Secure them using 2x screws (100400). The [detail view] shows screw insertion.
Step B: Use 2x screws (144717) to connect components. The [detail view] shows screw insertion.
General Attachment Steps
The assembly process often involves attaching panels to the main structure using screws like 10x screws (105344) or 10x screws (105344), as shown in various steps. Always refer to the specific diagrams for correct screw types and quantities.
Final Information
The document also includes visual references to different dishwasher program icons and control panel layouts for models such as LAGAN. These are provided for context regarding compatibility or usage of the dishwasher itself, rather than the VÅGLIG rail assembly.
The final page contains copyright information, the document identifier AA-2378837-2, and the publication date.
