Best Choice Products Mirrored Jewelry Armoire with Drawer
Instruction Manual
Model: SKY5948 | Version: 2
NOTICE
- Please retain these instructions for future reference.
- Firmly secure all bolts, screws, and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer's instructions as this could void the product warranty.
- This product is intended for residential use only.
TOOLS REQUIRED
- Phillips Screwdriver
- 3 AA Batteries
1 Person Assembly
Up to 30 Min. Assembly
HARDWARE
- 1 LAG BOLT: A long, threaded metal fastener with a hexagonal head. (8 PCS)
- 2 LAG NUT: A hexagonal nut designed to be used with lag bolts. (8 PCS)
- 3 M6 X 30MM DOWEL: A cylindrical wooden pin, 6mm in diameter and 30mm long. (10 PCS)
- 4 M2.5 X 12MM SCREW: A small metal screw with a fine thread, 2.5mm in diameter and 12mm long. (12 PCS)
- 5 M4 X 35MM SCREW: A metal screw, 4mm in diameter and 35mm long. (8 PCS)
- 6 M6 X 45MM BARREL BOLT: A metal bolt with a cylindrical head, 6mm in diameter and 45mm long. (6 PCS)
- 7 BARREL NUT: A cylindrical nut designed to be used with barrel bolts. (6 PCS)
- 8 M4 X 16MM SCREW: A metal screw, 4mm in diameter and 16mm long. (1 PC)
- 9 KNOB: A round handle, typically for drawers. (1 PC)
- 10 M3 X 12MM SCREW: A small metal screw, 3mm in diameter and 12mm long. (12 PCS)
- 11 M8 X 30MM DOWEL: A cylindrical wooden pin, 8mm in diameter and 30mm long. (2 PCS)
- 12 PIVOT CONNECTER SET: A set of metal components used to create a pivoting connection. (2 PCS)
- 13 FEMALE RUNNER (L/R): A metal track component, typically for drawers, with a groove for a male runner. Includes left and right versions. (1 SET)
- 14 MALE RUNNER (L/R): A metal track component, typically for drawers, designed to slide into a female runner. Includes left and right versions. (1 SET)
- 15 LARGE WASHER: A flat, circular metal ring with a larger outer diameter. (2 PCS)
- 16 SMALL WASHER: A flat, circular metal ring with a smaller outer diameter. (2 PCS)
PARTS
- A ARMOIRE: The main mirrored cabinet structure. (1 PC)
- B ARMOIRE SUPPORT: Tall, vertical support pieces for the armoire. (2 PCS)
- C SUPPORT BRACE: A horizontal metal bar connecting the armoire supports. (1 PC)
- D CABINET TOP: The top panel of the main cabinet structure. (1 PC)
- E1 CABINET SIDE: One of the side panels for the main cabinet. (1 SET)
- E2 CABINET SIDE: The other side panel for the main cabinet. (1 PC)
- F CABINET BACK: The rear panel of the main cabinet structure. (1 PC)
- G CABINET BASE: The bottom panel of the main cabinet structure. (1 SET)
- H1 DRAWER SIDE: One of the side panels for the drawer. (1 PC)
- H2 DRAWER SIDE: The other side panel for the drawer. (1 PC)
- I DRAWER BACK: The rear panel of the drawer. (1 PC)
- J DRAWER BOTTOM: The base panel of the drawer. (1 PC)
- K DRAWER FRONT: The front panel of the drawer, typically with a space for a knob. (1 PC)
PRODUCT ASSEMBLY
Step 1: Assemble the Drawer
Attach the drawer sides (H1, H2) to the drawer back (I) using four part 5 screws. Insert the drawer bottom (J) into the grooves of the assembled sides and back.
Step 2: Attach Drawer Front and Runners
Attach the knob (9) to the drawer front (K) using one part 8 screw. Then, attach the drawer front (K) to the assembled drawer box using four part 2 lag nuts and four part 1 lag bolts. Flip the drawer assembly and attach the male runner sets (14) to the drawer sides using six part 10 screws per side. Ensure the runner wheels are at the back of the drawer.
Step 3: Attach Cabinet Side Runners
Attach the female runner sets (13) to the cabinet sides (E1, E2) using six part 10 screws per side. Ensure the runner wheels are positioned at the drawer compartment opening.
Step 4: Attach Cabinet Sides to Base
Attach the cabinet side set (E1, E2) to the cabinet base (G) using four part 3 dowels and four part 5 screws.
Step 5: Assemble Support Structure
Attach two armoire supports (B) to the support brace (C) using two part 3 dowels, two part 7 barrel nuts, and two part 6 barrel bolts. Then, attach this support assembly to the cabinet top (D) using four part 7 barrel nuts and four part 6 barrel bolts.
Step 6: Attach Cabinet Top Assembly
Attach the cabinet top assembly (from Step 5) to the main cabinet assembly (from Step 4) using four part 3 dowels, four part 1 lag bolts, and four part 2 lag nuts.
Step 7: Attach Cabinet Back
Attach the cabinet back (F) to the rear of the assembled cabinet structure using twelve part 4 screws.
Step 8: Attach Armoire
Attach the main armoire (A) to the vertical supports. Insert two part 11 dowels into the corresponding holes on the armoire and supports for angle adjustment. Secure the armoire using two part 12 connector sets, two part 15 large washers, and two part 16 small washers.
INSTALLING BATTERIES
This armoire requires a total of 3 AA batteries. Locate the battery compartment on the back of the armoire. Remove the cover plate and install three AA batteries.
HELP CENTER
Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com
CHAT US!
Product Assembly
Returns & Refunds
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.
