HOMCOM Convertible Armchair Bed Assembly Instructions
Product Information
Brand: HOMCOM
Model Numbers: 839-834V00, 839-834V70, 839-834V01, 839-834V00CW
Product Type: Convertible Armchair Bed
Estimated Assembly Time: 10 Minutes
Parts Included
Part | Description | Quantity |
---|---|---|
A | Frame Piece | x1 |
B | Side Support | x2 |
C | Side Support | x2 |
D | Legs | x4 |
E | Cushion/Seat | x1 |
F | Connecting Bracket/Plate | x1 |
G | Screws/Fasteners | x4 |
Assembly Steps
Step 1: Identify and Organize Parts
Unpack all components and verify against the parts list. Ensure all parts (A-G) and fasteners are present and undamaged.
Visual Aid: Pages 1-8 display individual parts with their labels and quantities.
Step 2: Assemble Main Frame
Attach Part F (Connecting Bracket/Plate) to Part A (Frame Piece) using the provided fasteners (G).
Visual Aid: Page 9 shows Part A (Frame Piece, x1) and Part F (Connecting Bracket, x1). The bracket is positioned and attached to one end of the frame piece.
Step 3: Attach Side Supports
Connect two Part B (Side Supports) and two Part C (Side Supports) to the assembled frame from Step 2. Use fasteners (G) where indicated.
Visual Aid: Page 10 shows the frame from Step 2. Two 'B' parts and two 'C' parts are positioned along the sides and attached using fasteners.
Step 4: Install Legs
Attach the four Part D (Legs) to the underside of the assembled base structure. Use the provided fasteners (F).
Visual Aid: Page 11 shows the partially assembled unit. Four legs (D) are being attached to the corners of the base using brackets (F).
Step 5: Position Seat Cushion
Place the Part E (Cushion/Seat) onto the assembled frame.
Visual Aid: Page 12 shows the assembled base with legs. A large cushion (E) is being placed on top.
Step 6: Final Configuration
Ensure all parts are securely fastened. The convertible armchair is now ready for use. It can be converted into a bed by adjusting the backrest and unfolding the base.
Visual Aid: Page 13 shows the final product, a convertible armchair, with "E1" pointing to the cushion "E", indicating its placement and the completed assembly.