Peak Solice Pro Modular Wireless Adjustable Stroke Machine Manual

Peak Solice Pro Diagram

Power Button (Start/Pause): The main button for controlling the machine's power and pause functions.

Battery Capacity: Displays the remaining battery life.

Current Voltage: Shows the current voltage setting of the machine.

Voltage Adjustment: Allows for precise adjustment of the machine's voltage.

Jumpstart Icon: Indicates when the jumpstart feature is active.

Start/Pause Icon: Visual indicator when the machine is running or paused.

When Charging: The display shows "PEAK" when the machine is charging.

Fault Codes: If displayed, these codes indicate issues that may require a reboot or further attention.

• E1: Short Circuit
• E2: Over Current
• E3: Faulty Cord

*More information on fault codes can be found on page 5.

USB-C Input: Port for charging the machine's battery.

Battery Pack Built Into Housing: The integrated battery for wireless operation.

Stroke Adjustment Ring: Allows for adjustment of the machine's stroke length.

Textured Grip & Needle Depth Adjustment: Provides a secure grip and allows for adjustment of needle depth.

RCA Connection Module: Enables connection to a power supply via RCA cable.

3.5mm Battery Converter: Adapter for using the battery with 3.5mm connections.

RCA Battery Converter: Adapter for using the battery with RCA connections.

Technical Specifications

• Net Weight (with battery): 7.2oz
• Machine Length (with battery): 5"
• Stroke Length Options: 2.4, 2.7, 3.0, 3.3, 3.6, 3.9, and 4.2mm
• Voltage Range: 4v-12v
• Jumpstart Voltage: 9v in 0.3 seconds
• Battery Strength: 1500mAh
• Battery: USB-C chargeable, offers 4-7 hours of tattooing power. Enters sleep mode after 5 minutes of inactivity.
• Machine Body: Constructed from durable aluminum with the Peak logo.
• Motor: 1827 coreless motor.
• Connection: Removable 1500 mAh battery and magnetic RCA module.
• Package Includes: 3 O-rings, 2 Allen keys, 2 Battery Pack Converters (3.5mm + RCA input options), 1 spare fly wheel, 1 USB-C charging cable, and 1 RCA cord.

Key Features

• Lightweight pen-style modular tattoo machine.
• Fully adjustable stroke length.
• Can be used wirelessly or with a standard RCA connection.
• Allows connection to power for continuous tattooing, even with a low battery.
• Comes with two battery pack converters to adapt the PowerPack battery for RCA and 3.5mm input machines.
• Auto-sleep feature conserves battery life.
• Suitable for all tattooing styles.
• Compatible with the Radix footswitch.
• Compatible with the Solice 1.0 battery pack.

Get Started with Solice Pro

For Wireless Tattooing

1. Turn on without Jumpstart: Long-press the power button on the PowerPack battery. The machine will start with the previously adjusted voltage.
2. Turn on with Jumpstart: Quickly double-press the power button. A lightning bolt icon ⚡ will appear on the display.
3. Start or Pause: Press the power button whenever needed. A pedal icon ⏻ will appear when the machine is working. The battery offers up to 10 hours of use on a single charge and automatically shuts off after 5 minutes of inactivity.
4. Recharge: Connect the PowerPack to a USB-C charging cable to recharge. The battery capacity will be displayed.

For Tattooing with an RCA Connection

1. Remove the PowerPack battery.
2. Attach the magnetic RCA module (included with your Solice Pro machine).
3. Plug your Solice Pro into your preferred power supply using the included RCA cable.

Whether tattooing wirelessly or with an RCA connection, you can easily adjust your stroke length by turning the stroke adjustment ring to a range of 2.4mm up to 4.2mm.

*Do not adjust your stroke while your Solice Pro is running.

Pairing and Fault Codes

Pairing to the Radix Wireless Footswitch

1. Press the top of your Radix footswitch, then quickly double-press the bottom button to turn it on. A slow blinking red light on the footswitch indicates it's ready for pairing.
2. Press and hold the +/- buttons on your Solice Pro. The display will show “PAIR.” (Pairing activation wait time is 20 seconds).
3. Press the top of your Radix, then single-press the bottom button. A rapid blinking red light will appear on the footswitch. The Solice Pro display will show “DONE.”
4. Wait for the rapid blinking light on the footswitch to turn off. Pairing is complete, and your Solice Pro will return to the home screen.
5. Press and hold the bottom button on the Radix footswitch to turn it back on.

Unpairing the Radix Wireless Footswitch

1. Ensure your Radix footswitch is on. Press and hold the +/- buttons on your Solice Pro until the display shows “PAIR.”
2. Press the power button on your Solice Pro. The screen will say “DEL.”
3. Once unpaired, the Solice Pro screen will return to the home screen.

Fault Codes

• E1: Short Circuit: Indicates a short circuit. Try removing the battery and using a different pen. If the issue persists on a new machine, the original machine may have a motor issue. If the battery continues to show E1, it may need replacement.
• E2: Over Current: This is overcurrent protection. Check if the motor is stuck or if the drive bar or motor is broken. If everything appears functional, try a softer membrane needle. An E2 error suggests an issue external to the battery, which is protecting itself.
• E3: Faulty Cord: Indicates a faulty charging cord. Replace the cord and try again.

Warranty Information

For technical issues or repairs, contact Peak customer service at 410-712-0145. After receiving a return authorization, you can download and fill out the Peak Repair Order Form.

Mail your completed repair order form, machine, and proof of purchase to: 7410 Coca Cola Dr STE 108, Hanover, MD 21076. For questions or concerns, email info@peakneedles.com.

Machines purchased less than a year ago will be replaced with a new model. Machines older than one year are no longer covered under the one-year warranty.