SilverStone NT07-115X
Superior low-profile thermal solution for Intel LGA1156 / 1155 / 1150
65W TDP
Introduction
SilverStone Technology's Nitrogon NT07-115X is a super slim profile CPU cooler designed for space-limited applications that utilizes LGA 1156, 1155, or 1150 platforms. It features a copper center construction with extruded aluminum fins for excellent thermal conductive capability that rivals many larger coolers. The custom 80mm PWM fan is designed with fan blades to achieve the highest air pressure possible while maintaining an acoustic profile that is rare for coolers of this size. With a total height of only 23mm, the NT07-115X is an essential choice for super slim cases such as SilverStone Petit PT12 or PT13 utilizing LGA 1156, 1155, or 1150 processors.
Special Features
- Supports Intel LGA1156/1155/1150 processors
- Designed for low profile systems, only 23mm tall
- Large, custom 80mm PWM fan for excellent cooling and low noise
- Copper center and base with extruded aluminum fins
- Easy to install
Specifications
| Model No. | SST-NT07-115X |
|---|---|
| Material | Copper center, Extruded aluminum fins |
| Application | Intel Socket LGA1156/1155/1150 |
| Dimension w/fan | 90mm (W) x 23mm (H) x 90mm (D) |
| Cooling fan | 80mm PWM |
| Fan blade size | 80mm (W) x 10mm (H) x 80 mm (D) |
| Fan speed | 1200~3400 RPM |
| Max air pressure | 2.6mmH2O |
| Max airflow | 48CFM |
| Noise | 18~26dBA |
| CPU TDP | 65W |
| Net Weight | 201g (with fan & clip) |
Installation Guide
Step 1: Install Back-plate
Description of diagram: A motherboard is shown with a separate back-plate positioned to be installed on its rear.
Instruction: Install the included back-plate onto the backside of the motherboard.
Step 2: Apply Thermal Compound
Description of diagram: A CPU socket on a motherboard is shown. Thermal compound is being applied evenly onto the CPU surface.
Instruction: Apply the included heatsink compound on your CPU evenly.
Step 3: Mount the Cooler
Description of diagram: The CPU cooler is shown being placed onto the CPU on the motherboard. Arrows indicate the mounting points and direction of placement.
Instruction: Place the NT07-115X cooler on top of the installed CPU, and align the four spring screws with the holes on the motherboard.
Step 4: Secure the Cooler
Description of diagram: The cooler is shown mounted. Arrows labeled 'A' and 'B' point to screw locations, indicating the order of tightening.
Instruction: Press and fasten two screws in position A as shown, and then the other two in position B to fix the CPU cooler in place.
Step 5: Connect Fan Cable
Description of diagram: A close-up view shows the CPU fan cable being connected to the motherboard's CPU fan header.
Instruction: When the NT07-115X is installed, connect the CPU fan cable to the motherboard fan header for CPU.
Removal Guide
Step 1: Disconnect Fan Cable
Description of diagram: A close-up view shows the CPU fan cable being disconnected from the motherboard's CPU fan header.
Instruction: Remove the CPU fan cable from the motherboard fan header.
Step 2: Loosen Screws
Description of diagram: The cooler is shown mounted. Arrows labeled 'A' and 'B' point to screw locations, indicating the order of loosening.
Instruction: Loosen and pull up two screws in position A and then the other two in position B to remove the CPU Cooler from the motherboard.
Step 3: Remove Cooler
Description of diagram: The cooler is shown being lifted off the CPU on the motherboard.
Instruction: Remove the CPU cooler from the motherboard.
Step 4: Remove Back-plate
Description of diagram: A motherboard is shown with the cooler removed, and the back-plate being detached from the rear.
Instruction: Remove back-plate from the motherboard.
Warranty Information
This product has a limited 3 year warranty in North America, Europe, and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
Warranty terms & conditions
- Product component defects or damages resulted from defective production are covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology's jurisdiction:
- Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
- Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc.).
- Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
- Warranty mark/stickers are not removed or broken.
- Under warranty, SilverStone Technology's maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
- Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
- Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser.
- You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
- If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone at http://www.silverstonetek.com. Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization ("RMA") number from SilverStone. Updated warranty information will be posted on SilverStone's official website. Please visit http://www.silverstonetek.com for the latest updates.
Additional info & contacts
For North America (usasupport@silverstonetek.com) SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the "USA RMA form for end-users" form from the below link and follow its instructions. http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com) Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please refer to above "Warranty terms & conditions" for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238 (standard international call charges apply)
For Europe (support.eu@silverstonetek.de)
For all other regions (support@silverstonetek.com)
Purchase Information
To be valid, this sheet must be filled out by your salesperson at the time of purchase.
- Store:
- Purchaser:
- Purchase date:
- Model No.:
- Serial No.:
SilverStone
