LuxPro XP916 Rechargeable LED Flashlight

A black, cylindrical LED flashlight with a textured grip and a prominent tail cap button. It features the 'LUX PRO' logo and 'XP916' model designation on its body. The flashlight is shown with a 'USB Rechargeable' indicator.

Operation Instructions

On/Off

Press and release the button on the tail cap to turn the light on and off.

Cycle Modes

Press the button on the tail cap quickly to cycle through modes (High/Medium/Low). If the light remains in a single mode for longer than 3-5 seconds, the next press of the button will turn the light off. The light automatically resets to High mode when turned off.

Hidden Strobe On/Off

Press and hold the button for 3 seconds to activate hidden strobe mode. The flashlight will remain in hidden strobe mode until it is deactivated by pushing and holding the button for 3 seconds again.

Charging Instructions

To charge the flashlight, reveal the charge port on the tail end of the light by rotating the charge port cover to the left.

Plug the small end of the Micro-USB charging cable (included) into the port on the flashlight. Plug the opposite end of the charging cable into a 5V USB power source.

The indicator light near the charge port will be red while the light is charging, then turn green to indicate the battery is fully charged.

The rechargeable battery is sealed and replacement is not necessary. The XP916 has a charge time of approximately 3 hours.

Features

• Constructed with aircraft-grade aluminum
• LPE optics
• Patented TackGrip molded rubber grip
• Rear tactical on/off button
• 1x18650 1800mAh Li-ion rechargeable batteries
• Micro USB charge port access via rotating dial (USB cable included)

Specifications (ANSI/PLATO FL1 STANDARD)

Product Warranty

The XP916 has a Limited Lifetime Warranty Against Manufacturer's Defects from time of purchase.

For warranty claims, please contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com.