USER MANUAL
LP395 Glow-In-The-Dark GELS Flashlight
Requires 3 AAA Batteries
Operation Instructions
On/Off: Press and release the button on the tail cap to turn the light on and off.
A collection of five colorful flashlights (purple, pink, green, blue, and teal) arranged in a cluster is depicted. The LuxPro logo is visible on one of the flashlights.
Glow-In-The-Dark Feature
To activate the glowing rubber feature, the flashlight must be exposed to a bright light for a few minutes. The duration of glow varies by the color of the light and ranges between 2 – 5 minutes.
Battery Replacement
The LP395 uses 3 AAA batteries.
To replace the batteries, turn the tail cap counterclockwise to remove it. Tip the light downward to slide out the battery case which contains the batteries. Remove the batteries from the case and insert new batteries according to the positive (+) and negative (-) symbols found on the case.
For best results, it is recommended to use brand new alkaline batteries that are the same voltage and brand.
Re-insert the battery case into the flashlight with the (+) side first, ensuring the arrow on the battery case is pointing down. Re-attach the tail cap by pressing down lightly and turning it clockwise until tight.
If the flashlight will not be used for a while, it is suggested to remove the batteries and store them in a dry, protected place.
A disassembled flashlight showing the battery compartment, three AAA batteries, and the tail cap is depicted.
Features
- Constructed with aircraft-grade aluminum
- 9 LED flashlight
- Glow-in-the-dark rubber grip
- Matching wrist band
- Tactical on/off button
- IPX4 waterproof rating
- Batteries included (3 AAA)
ANSI/PLATO FL1 STANDARD
| MODES | LUMENS | RUN TIME | BEAM DISTANCE |
|---|---|---|---|
| High | 40 lm | 10h | 15m |
Product Warranty
The LP395 has a Limited 30-Day Warranty Against Manufacturer's Defects from the time of purchase.
For warranty claims, please contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com.
