760150813 | Z-144-MP-8W-F12BK/D
CommScope TeraSPEED® Low Smoke Zero Halogen Riser MPO Trunk Cable
Product Overview
Fiber Indoor/Outdoor cable, TeraSPEED® Low Smoke Zero Halogen Riser MPO Trunk, Gel-Free, 144 fiber multi-unit with 12 fiber subunits, Singlemode G.652.D and G.657.A1, Feet jacket marking, Black jacket color, Dca flame rating.
Representative Image Description: The cable features a black, LSZH (Low Smoke Zero Halogen) outer jacket. Internally, it contains a rip cord, water blocking tape, 12 fiber subunits (each with 3.0mm Arid-Core®), additional water blocking tape, and a central strength member.
Product Classification
- Regional Availability: Asia, Australia/New Zealand, EMEA, Latin America, North America
- Portfolio: CommScope®
- Product Type: Fiber indoor/outdoor cable
- Product Series: Z-MP
General Specifications
| Cable Type | MPO trunk cable |
| Construction Type | Non-armored |
| Subunit Type | Gel-free |
| Jacket Color | Black |
| Jacket Marking | Feet |
| Subunit, quantity | 12 |
| Fibers per Subunit, quantity | 12 |
| Total Fiber Count | 144 |
| Buffer Tube/Subunit Diameter | 3 mm | 0.118 in |
| Diameter Over Jacket | 16.8 mm | 0.661 in |
Mechanical Specifications
| Parameter | Value |
|---|---|
| Minimum Bend Radius, loaded | 252 mm | 9.921 in |
| Minimum Bend Radius, unloaded | 168 mm | 6.614 in |
| Tensile Load, long term, maximum | 400 N | 89.924 lbf |
| Tensile Load, short term, maximum | 1335 N | 300.12 lbf |
| Compression | 10 N/mm | 57.101 lb/in |
| Compression Test Method | FOTP-41 | IEC 60794-1 E3 |
| Flex | 300 cycles |
| Flex Test Method | FOTP-104 | IEC 60794-1 E6 |
| Impact | 2.94 N-m | 26.021 in lb |
| Impact Test Method | FOTP-25 | IEC 60794-1 E4 |
| Strain | See long and short term tensile loads |
| Strain Test Method | FOTP-33 | IEC 60794-1 E1 |
| Twist | 10 cycles |
| Twist Test Method | FOTP-85 | IEC 60794-1 E7 |
| Vertical Rise, maximum | 155 m | 508.53 ft |
Optical Specifications
| Parameter | Value |
|---|---|
| Fiber Type | G.652.D and G.657.A1, TeraSPEED® | OS2 | OS2 |
| Cabled Cutoff Wavelength, maximum | 1260 nm |
| Point Defects, maximum | 0.1 dB |
| Zero Dispersion Slope, maximum | 0.092 ps/[km-nm-nm] |
| Zero Dispersion Wavelength, maximum | 1324 nm |
| Zero Dispersion Wavelength, minimum | 1300 nm |
| Attenuation, maximum | 0.40 dB/km @ 1,310 nm | 0.40 dB/km @ 1,385 nm | 0.40 dB/km @ 1,490 nm | 0.40 dB/km @ 1,550 nm | 0.50 dB/km @ 1,270 nm | 0.50 dB/km @ 1,575 nm |
| Backscatter Coefficient | -79.6 dB @ 1,310 nm | -82.1 dB @ 1,550 nm |
| Dispersion, maximum | 18 ps(nm-km) at 1550 nm | 3.5 ps(nm-km) from 1285 nm to 1330 nm at 1310 nm |
| Index of Refraction | 1.467 @ 1,310 nm | 1.467 @ 1,385 nm | 1.468 @ 1,550 nm |
| Mode Field Diameter | 10.4 µm @ 1,550 nm | 9.2 µm @ 1,310 nm | 9.6 µm @ 1,385 nm |
| Mode Field Diameter Tolerance | ±0.4 µm @ 1310 nm | ±0.5 µm @ 1550 nm | ±0.6 µm @ 1385 nm |
| Polarization Mode Dispersion Link Design Value, maximum | 0.06 ps/sqrt(km) |
| Standards Compliance | ITU-T G.652.D | ITU-T G.657.A1 | TIA-492CAAB (OS2) |
Environmental Specifications
| Parameter | Value |
|---|---|
| Installation temperature | -30 °C to +60 °C (-22 °F to +140 °F) |
| Operating Temperature | -40 °C to +70 °C (-40 °F to +158 °F) |
| Storage Temperature | -40 °C to +75 °C (-40 °F to +167 °F) |
| Heat Aging, maximum | 0.05 dB/km @ 85 °C |
| Temperature Dependence, maximum | 0.05 dB/km (Specification applicable to non-terminated bulk fiber cable, conducted at -60 °C to +85 °C (-76 °F to +185 °F)) |
| Temperature Humidity Cycling, maximum | 0.05 dB/km (Conducted at -10 °C to +85 °C (+14 °F to +185 °F) up to 95% relative humidity) |
| Water Immersion, maximum | 0.05 dB/km @ 23 °C |
Regulatory Compliance & Certifications
Cable Qualification Standards
- ANSI/ICEA S-83-596 | Telcordia GR-409
- EN50575 CPR Cable EuroClass Fire Performance: Dca
- EN50575 CPR Cable EuroClass Smoke Rating: s1b
- EN50575 CPR Cable EuroClass Droplets Rating: d0
- EN50575 CPR Cable EuroClass Acidity Rating: a1
- Environmental Space: Low Smoke Zero Halogen (LSZH) | Riser
- Flame Test Listing: NEC OFNR-ST1 (ETL) and c(ETL)
- Flame Test Method: IEC 60332-3 | IEC 60754-2 | IEC 61034-2 | UL 1666 | UL 1685
- Jacket UV Resistance: UV stabilized
Environmental Test Specifications
| Parameter | Value |
|---|---|
| Cable Freeze Test Method | IEC 60794-1 F15 |
| Heat Age | -20 °C to +85 °C (-4 °F to +185 °F) |
| Heat Age Test Method | IEC 60794-1 F9 |
| Low High Bend | -20 °C to +70 °C (-4 °F to +158 °F) |
| Low High Bend Test Method | FOTP-37 | IEC 60794-1 E11 |
| Temperature Cycle | -20 °C to +70 °C (-4 °F to +158 °F) |
| Temperature Cycle Test Method | FOTP-3 | IEC 60794-1 F1 |
Packaging and Weights
| Parameter | Value |
|---|---|
| Cable weight | 264 kg/km | 177.4 lb/kft |
Regulatory Compliance/Certifications
| Agency | Classification |
|---|---|
| CENELEC | EN 50575 compliant, Declaration of Performance (DoP) available |
| CHINA-ROHS | Below maximum concentration value |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance ProductCompliance |
| ROHS | Compliant |
| UK-ROHS | Compliant |
Included Products
- CS-8W-MP TeraSPEED® OS2 Singlemode
