CommScope TeraSPEED N-024-MP-8W-F12YL/D Fiber Optic Cable

This document provides detailed specifications for the CommScope TeraSPEED N-024-MP-8W-F12YL/D fiber optic cable.

Product Classification

Portfolio	CommScope®
Product Type	Fiber indoor cable / Optical fiber
Product Series	N-MP / TeraSPEED® OS2 Singlemode
Regional Availability	Asia, Australia/New Zealand, EMEA, Latin America, North America

General Specifications

Cable Type	MPO trunk cable
Construction Type	Non-armored
Subunit Type	Gel-free
Jacket Color	Yellow
Jacket Marking	Feet
Subunit, quantity	2
Fibers per Subunit, quantity	12
Total Fiber Count	24

Dimensions

Height Over Jacket	5.2 mm \| 0.205 in
Width Over Jacket	8.2 mm \| 0.323 in
Buffer Tube/Subunit Diameter	3 mm \| 0.118 in
Fiber Curl, minimum	4 m \| 13.123 ft

Cable Structure

The cable features an LSZH (Low Smoke Zero Halogen) outer jacket. Beneath this are ARP Rods, a Ripcord for easy opening, Aramid Yarn for tensile strength, and a 12-Fiber Subunit containing the optical fibers.

Mechanical Specifications

Minimum Bend Radius, loaded	78 mm \| 3.071 in
Minimum Bend Radius, unloaded	52 mm \| 2.047 in
Tensile Load, long term, maximum	200 N \| 44.962 lbf
Tensile Load, short term, maximum	667 N \| 149.948 lbf
Compression	10 N/mm \| 57.101 lb/in
Compression Test Method	FOTP-41 \| IEC 60794-1 E3
Flex	300 cycles
Flex Test Method	FOTP-104 \| IEC 60794-1 E6
Impact	2.94 N-m \| 26.021 in lb
Impact Test Method	FOTP-25 \| IEC 60794-1 E4
Strain Test Method	FOTP-33 \| IEC 60794-1 E1
Twist	10 cycles
Twist Test Method	FOTP-85 \| IEC 60794-1 E7
Vertical Rise, maximum	491 m \| 1,610.892 ft
Proof Tensile Stress	100,000 psi (0.69 GPa)
Macrobending, 20 mm Ø mandrel, 1 turn	0.75 dB @ 1,550 nm \| 1.50 dB @ 1,625 nm
Macrobending, 30 mm Ø mandrel, 10 turns	0.25 dB @ 1,550 nm \| 1.00 dB @ 1,625 nm
Macrobending, 60 mm Ø mandrel, 100 turns	0.05 dB @ 1,550 nm \| 0.05 dB @ 1,625 nm
Coating Strip Force, maximum	8.9 N \| 2.001 lbf
Coating Strip Force, minimum	1.3 N \| 0.292 lbf
Dynamic Fatigue Parameter, minimum	20

Optical Specifications

Fiber Type	G.652.D and G.657.A1, TeraSPEED® \| OS2 \| OS2
Cabled Cutoff Wavelength, maximum	1260 nm
Point Defects, maximum	0.1 dB
Zero Dispersion Slope, maximum	0.092 ps/[km-nm-nm]
Zero Dispersion Wavelength, maximum	1324 nm
Zero Dispersion Wavelength, minimum	1300 nm

Wavelength Specific Optical Specifications

Attenuation, maximum	0.40 dB/km @ 1,310 nm \| 0.40 dB/km @ 1,385 nm \| 0.40 dB/km @ 1,490 nm \| 0.40 dB/km @ 1,550 nm \| 0.50 dB/km @ 1,270 nm \| 0.50 dB/km @ 1,575 nm
Backscatter Coefficient	-79.6 dB @ 1,310 nm \| -82.1 dB @ 1,550 nm
Dispersion, maximum	18 ps(nm-km) at 1550 nm \| 3.5 ps(nm-km) from 1285 nm to 1330 nm at 1310 nm
Index of Refraction	1.467 @ 1,310 nm \| 1.467 @ 1,385 nm \| 1.468 @ 1,550 nm
Mode Field Diameter	10.4 µm @ 1,550 nm \| 9.2 µm @ 1,310 nm \| 9.6 µm @ 1,385 nm
Mode Field Diameter Tolerance	±0.4 µm @ 1310 nm \| ±0.5 µm @ 1550 nm \| ±0.6 µm @ 1385 nm
Polarization Mode Dispersion Link Design Value, maximum	0.06 ps/sqrt(km)
Standards Compliance	ITU-T G.652.D \| ITU-T G.657.A1 \| TIA-492CAAB (OS2)

Environmental Specifications

Installation temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Operating Temperature	-20 °C to +70 °C (-4 °F to +158 °F)
Storage Temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Heat Age, maximum	0.05 dB/km @ 85 °C
Temperature Dependence, maximum	0.05 dB/km
Temperature Humidity Cycling, maximum	0.05 dB/km
Water Immersion, maximum	0.05 dB/km @ 23 °C

Environmental Test Specifications

Heat Age Test Method	IEC 60794-1 F9
Low High Bend Test Method	FOTP-37 \| IEC 60794-1 E11
Temperature Cycle Test Method	FOTP-3 \| IEC 60794-1 F1

Regulatory Compliance/Certifications

Agency	Classification
CENELEC	EN 50575 compliant, Declaration of Performance (DoP) available
CHINA-ROHS	Below maximum concentration value
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
REACH-SVHC	Compliant as per SVHC revision on https://www.commscope.com/ProductCompliance
ROHS	Compliant
UK-ROHS	Compliant

Included Products

CS-8W-MP TeraSPEED® OS2 Singlemode

Footnotes

Operating Temperature: Specification applicable to non-terminated bulk fiber cable.

Temperature Dependence, maximum: Temperature dependence is conducted at -60 °C to +85 °C (-76 °F to +185 °F).

Temperature Humidity Cycling, maximum: Temperature humidity cycling is conducted at -10 °C to +85 °C (+14 °F to +185 °F) up to 95% relative humidity.

	CommScope N-024-MP-8W-F12YL/D Fiber Optic Cable Datasheet Technical specifications for the CommScope N-024-MP-8W-F12YL/D TeraSPEED Low Smoke Zero Halogen (LSZH) Riser MPO Trunk fiber indoor cable, detailing its construction, performance, and compliance.
	CommScope N-144-MP-8W-F12YL/D TeraSPEED Fiber Optic Cable Specifications Detailed specifications for the CommScope N-144-MP-8W-F12YL/D TeraSPEED fiber optic cable, including product classification, general, mechanical, optical, and environmental specifications, as well as regulatory compliance.
	CommScope TeraSPEED N-144-MP-8W-F12YL/D Fiber Optic Cable Specifications Detailed technical specifications for the CommScope TeraSPEED N-144-MP-8W-F12YL/D fiber optic cable, including product classification, general, mechanical, optical, and environmental specifications, and regulatory compliance.
	CommScope TeraSPEED® Z-144-MP-8W-F12BK/D Fiber Optic Cable Specifications Detailed technical specifications for the CommScope TeraSPEED® Z-144-MP-8W-F12BK/D Fiber Indoor/Outdoor MPO Trunk Cable, including mechanical, optical, environmental, and compliance data.
	CommScope TeraSPEED P-024-MP-8W-F12BK Fiber Optic Cable Specifications Detailed technical specifications for the CommScope TeraSPEED P-024-MP-8W-F12BK fiber indoor cable, covering product classification, general, mechanical, optical, environmental, and regulatory compliance details.
	CommScope Z-144-MP-8W-F12BK/D TeraSPEED Fiber Optic Cable Specifications Detailed specifications for the CommScope Z-144-MP-8W-F12BK/D TeraSPEED fiber optic cable, including mechanical, optical, environmental, and regulatory compliance data. Features 144 fibers, LSZH jacket, and Dca flame rating.
	CommScope TeraSPEED P-072-MZ-8W-F12YL Fiber Indoor Cable Specifications Comprehensive technical specifications for the CommScope TeraSPEED P-072-MZ-8W-F12YL fiber indoor cable, covering product classification, general, mechanical, optical, and environmental properties, along with regulatory compliance and included products.
	CommScope P-012-MZ-8W-F12YL TeraSPEED Plenum MPO Trunk Cable Specifications Detailed technical specifications for the CommScope P-012-MZ-8W-F12YL TeraSPEED Plenum MPO Trunk Cable, including mechanical, optical, environmental, and regulatory compliance details. Features 12 fibers, interlocking aluminum armor, and yellow plenum jacket.