BTicino Class 100 Video Doorphone
Model Numbers: 344652, 344662
Dimensional Data
The BTicino Class 100 video doorphone offers specific dimensions for installation and operation.
- Recommended Installation Height: 90-130 cm, unless otherwise specified by regulations.
- Device Dimensions: Approximately 165 mm (height) x 164 mm (width) x 20.5 mm (depth).
- Cable Diameter: Maximum 5 mm for connections.
Installation Overview
The unit is designed for wall mounting. The typical installation process involves:
- Installing a suitable wall box (e.g., 502E-503E).
- Securing a mounting plate to the box.
- Connecting the device to the plate, which includes wiring to the SCS 2-Wire BUS and potentially an external floor call button.
Note: Some accessories may need to be purchased separately.
Front View and Controls
The front panel features a display and several touch-sensitive controls:
- 1. Loudspeaker: For audio output.
- 2. Display: A 5-inch (16:9) color screen providing visual feedback.
- 3. Notification LED: Indicates the status of the bell. A flashing red LED signifies that the bell function is excluded.
- 4. Door Lock Release Key: A touch-sensitive button to unlock doors. A flashing white LED indicates that the "Professional Studio" (Office) function is active.
- 5. Entrance Panel/Scrolling Key: Used to activate the external unit or cycle through different views.
- 6. Tactile Guides: Raised markings to assist visually impaired users.
- 7. Communication Disable Key: This key deactivates the communication. A flashing red LED indicates an ongoing call.
- 8. Microphone: Captures audio input.
- 9. Staircase Light/Favorites Key: A touch key for controlling staircase lighting or accessing favorite functions.
- 10. Communication Enable Key: Used to initiate or answer calls. A flashing green LED indicates an incoming call.
Important Note for Key 4: If the LEDs flash white upon pressing the door lock release key, the "safe door lock" function is active, and the key itself will be deactivated.
Available Functions
The BTicino Class 100 offers a range of functionalities:
- Teleloop: Available for specific models (e.g., item 344662), providing an inductive loop for hearing aids.
- Preset Intercom: Allows for pre-configured intercom communication.
- Door Status: Monitors the status of connected doors.
- Intercom: Enables two-way audio communication.
- Auto-switching ON: Automatic activation of certain functions.
- Safe Door Lock: Enhanced security feature for door locking.
Back View and Configuration
The rear of the unit houses configuration switches and connection terminals:
- 1. Slave/Master Function Microswitch: Configures the unit as either a master or slave device within the system.
- 2. Safe Door Lock Function Microswitch (ON/OFF): When set to ON, this function is active even when the device is not powered.
- 3. Configurator Socket: A slot for inserting specific configuration modules.
- 4. Line Termination Micro-switch (ON/OFF): Used to properly terminate the SCS bus line, preventing signal reflections.
- 5. SCS 2-Wire BUS Terminals: Connection points for integrating the device into the BTicino SCS 2-wire bus system.
- 6. Floor Call Button Terminals: Allows connection of an external button to signal a specific floor.
- 7. Joystick: A control for navigating menus, making adjustments, and programming the device.
Technical Specifications
| Parameter | Specification |
|---|---|
| Power Supply | 18-27 Vdc |
| Standby Absorption | 10 mA |
| Maximum Absorption | 250 mA max |
| Maximum Cable Section per Terminal | 2 x 1 mm² |
| Operating Temperature | 5-40 °C |
Safety Warnings and Consumer Rights
Please read the following important safety information and consumer rights carefully before using the product and retain for future reference:
- Prohibited Actions:
- Using liquid cleaners or aerosols.
- Blocking ventilation openings.
- Modifying the device.
- Removing protective parts.
- Installing units near liquids, powders, heat sources, or harmful gases/metal dust.
- Power Disconnection: Always disconnect the power supply before performing any work on the system or the device.
- Qualified Personnel: Installation, configuration, start-up, and maintenance operations must be performed exclusively by qualified and trained personnel.
- Installation Practices: Ensure wall installations are performed correctly and that cables are laid in compliance with current regulations. Connect power supply cables according to the provided instructions.
- System Expansions: For any system expansions, use only the components specified in the technical documentation.
