BTicino Wireless Double Light Switch

Product Description and Features

The BTicino wireless double light switch, models YW/YD/YG4003DCW, is designed for modern home automation. The device features fixing holes with center distances of 83.5 mm and 60 mm. It includes a pre-cut section for transforming a 3-module frame to a 2-module frame. Key components identified are: a control pushbutton, a notification LED, a tab to be removed, an adhesive positioning area, and a factory reset pushbutton. The reset pushbutton should be pressed and held until the red LED turns on for factory reset.

Configuration and App Support

For device configuration, installation, and further information, users are directed to the BTicino app or documentation available on the website www.homesystems-legrandgroup.com. The app requires Android 5.0 or later with Google Play access, or an iPhone with iOS 12.0 or later.

Available via: Download App, Home + Control

Installation and Mounting

The device supports both wall mounting and flush mounting. The installation process includes securing the unit to the wall or flush into a surface. The unit also allows for conversion from a 3-module frame to a 2-module frame. Instructions for disassembly are also provided. The unit comes with a removable sticker for positioning.

Battery Replacement

To replace the battery, first remove the cover. Then, carefully remove the old battery (CR2032 Lithium 3V) and insert the new one, ensuring correct polarity. The device uses a CR2032 Lithium 3V battery.

Battery Disposal: Used batteries must be disposed of respecting current laws.

Technical Specifications

Important Warnings and Safety Information

General Precautions: Read instructions carefully before use and keep for future reference. Do not touch units with wet hands. Do not use liquid cleaners or aerosols. Do not block ventilation openings. Do not modify or remove protective parts. Avoid exposure to water drips or splashes. Do not install near heat/cold sources, harmful gases, or dust. Do not fix to unsuitable surfaces.

Electrical Safety: Danger of electrical shock. Switch off power before any system work. Connect power supply wires as indicated.

Installation Safety: Risk of devices falling due to surface collapse or improper installation. Ensure wall installation is correct per instructions and complies with current standards. Use only specified items for system expansions. Installation, configuration, and maintenance must be performed by qualified personnel.

Remote Operation: Remote operation may cause damage to people or property.

Declaration of Conformity

BTicino S.p.A. declares that the radio equipment type Wireless double light switch (art. YW/YG/YD4003DCW) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.legrand.com/ecatalogue.