White's Bullseye TRX Pinpointer

Introduction

The White's Bullseye TRX is a hand-held pinpointer designed to assist metal detectorists in precisely locating targets once they have been unearthed. It enhances the detection process by providing clear proximity feedback.

Key Features

• Audio Alert: ? The pinpointer emits a repeating beep. The frequency of the beeps increases as the probe tip moves closer to a metallic target, indicating proximity.
• Vibration Alert: ? In addition to audio, the TRX features a vibrator that produces short, repeating pulses. This is useful for silent operation or in noisy environments.
• Proximity Indication: Both audio and vibration alerts intensify with decreasing distance to the target.
• Ergonomic Design: The unit is designed for comfortable, one-handed operation.
• Sensitivity: Engineered for high sensitivity to small targets.
• Water Resistance: The TRX is often designed to be water-resistant, allowing for use in wet conditions or even shallow submersion.

Operation

To operate the White's Bullseye TRX:

1. Turn the unit on using its power control.
2. Gently sweep the pinpointer's tip over the area where a target is suspected.
3. Pay attention to the audio alerts (beeping) and vibration feedback.
4. As the pinpointer gets closer to the target, the rate of beeps and vibrations will increase.
5. Use this feedback to pinpoint the exact location of the target.
6. Turn the unit off when finished to conserve battery power.

Specifications

While specific details may vary slightly by revision, typical specifications include:

Maintenance and Care

Keep the pinpointer clean, especially the probe tip. Refer to the official manual for detailed cleaning and battery replacement instructions. Store in a dry place when not in use.