COROS Quick Start Guide

Getting Started

1. Download the COROS App

   To begin, download the COROS app on your smartphone. You can do this by scanning the QR code provided or visiting app.coros.com.

   [QR code for app.coros.com]

2. Create Your COROS Account

   Open the COROS app and sign up using your email address. Please read and agree to the COROS Privacy Policy and Terms of Service.

   [Illustration of a smartphone screen showing the sign-up page]

3. Power On Your Watch

   Press the side button on your COROS watch to power it on.

   [Illustration of a COROS watch with the power button highlighted]

4. Pair with the COROS App

   In the COROS app, navigate to 'My Device' and select 'Add New Device'. Follow the on-screen prompts to pair your watch with your smartphone. This typically involves scanning a QR code displayed on the watch.

   [Illustration of a smartphone screen showing the 'Add New Device' option and a watch being scanned]

Product Safety and Compliance

This section provides important information regarding the safe use, charging, battery handling, and regulatory compliance of your COROS device.

Charging Specifications

Input: 5V-1A. Use only official COROS accessories for charging. To prevent battery damage, do not leave the device on the charger for extended periods. Avoid charging in wet conditions.

Battery Warnings

• Do not attempt unauthorized battery replacement.
• Avoid exposing the battery to extreme temperatures (hot or cold).
• Do not submerge the battery in water or other liquids.
• Keep the battery away from children to prevent accidental ingestion.
• Dispose of the product and battery as electronic waste according to local regulations.

Hazardous Substances Information

The following table indicates the presence of hazardous substances in the product's components, in compliance with GB/T 26572-2011 standards:

O: Indicates that the content of the hazardous substance in all homogeneous materials of this part is within the limit requirements specified in GB/T 26572-2011.

X: Indicates that the content of the hazardous substance in at least one homogeneous material of this part exceeds the limit requirements specified in GB/T 26572-2011, and there is currently no mature alternative solution in the industry, which complies with the EU RoHS directive environmental requirements.

The number in this label indicates the environmental protection use period of the product under normal use conditions, which is 10 years. Some components may also have an environmental protection use period label; the environmental protection use period for those components shall be subject to the number indicated on the label. Due to different models, the product may not include all the above components except the host. Please refer to the actual sales configuration of the product.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting or relocating the receiving antenna, increasing the separation between equipment and receiver, connecting the equipment to an outlet on a different circuit, or consulting a dealer or experienced technician.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For face up, 10mm was used for test; this equipment should be installed and operated with a minimum distance of 10m.

IC Warning

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

IC Radiation Exposure: This equipment complies with ISEDC RF radiation exposure limits for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For face up, 10mm was used for test; this equipment should be installed and operated with a minimum distance of 10m.

CE Statement

COROS declares that this product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://coros.com/declaration-of-conformity. The Bluetooth module operates on a 2.4 GHz frequency and may interfere with communication devices.

Bluetooth and WIFI Specifications:

• COROS PACE 2: Bluetooth: 2400MHz – 2483.5MHz, -6.53dBm
• COROS APEX 2: Bluetooth: 2400MHz – 2483.5MHz, 3.17dBm; WIFI: 2400MHz - 2483.5MHz, 14.76dBm
• COROS APEX 2 Pro: Bluetooth: 2400MHz – 2483.5MHz, 3.47dBm; WIFI: 2400MHz - 2483.5MHz, 6.93dBm
• COROS VERTIX 2: Bluetooth: 2400MHz – 2483.5MHz, 9.26dBm; WIFI: 2400MHz - 2483.5MHz, 14.44dBm
• COROS PACE 3: Bluetooth: 2400MHz – 2483.5MHz, 11.79dBm; WIFI: 2400MHz - 2483.5MHz, 13.68dBm

Regulatory Marks

The product bears the following compliance marks: UKCA, CE, RoHS.

Importer Information

China: Guangdong COROS Sports Technology Joint Stock Company, Room 601 & 701, Bld. 2, No. 2, Science and Technology 9 Rd, Songshan Lake Hi-Tech Zone, Dongguan, Guangdong 523808, China

USA: COROS Wearables, Inc., 3 Peters Canyon Road Suite 100, Irvine, CA 92606, United States

EU: COROS Netherlands B.V., De Oude Veiling 79M, 1689 AD Zwaag, Netherlands

UK: COROS Wearables UK Ltd., Office 4, Embsay Mills, Skipton, North Yorkshire, BD23 6QF, United Kingdom

Product Identification

FCC ID: 2BBGF-W331

IC: 29574-W331