Takstar SP-16P Wireless Headset Microphone
User Manual
Preface
Dear Customer, Thank you for purchasing the Takstar SP-16P Wireless Headset Microphone. To better understand and use the product, please read this manual thoroughly. If you have any questions or suggestions, please contact your local dealer.
Features
- Designed specifically for educational environments, ideal for classroom audio systems.
- UHF low-power wireless technology ensures interference-free transmission up to 30 meters.
- Infrared frequency sync for secure and reliable frequency adjustments using a synchronizer.
- Automatic or manual frequency sync options for effortless setup.
- Use flexibly with whichever synchronizer you need as you go.
- High-sensitivity electret condenser capsule with wide frequency response for clear and natural voice reproduction.
- Built-in lithium-ion battery, up to 8 hours of continuous usage.
Applications
- Suitable for teaching, conference rooms, and similar settings.
Specifications
- Transducer Type: Electret Condenser
- Polar Pattern: Uni-directional
- Frequency Response: 100Hz-16kHz
- Frequency Range: 640MHz-664.75MHz
- Operating Voltage: DC 2.4-5.5V
- Battery Specs: 400mAh Lithium Polymer
- Charging Voltage: DC 5V/500mA
- Charging Time: Approx. 1.5 hours
- Usage Time: Approx. 8 hours
- Sensitivity: -49 to -52dB
- Operating Range: Approx. 30m in open areas
- Mic Weight: Approx. 39g
Note: The above data are measured by Takstar laboratory, and Takstar has the final interpretation right!
Function Descriptions
The headset microphone features several components:
- Volume Lock Switch: Set to "OFF" position for adjusting mic volume using volume control buttons. Set to "ON" position to lock volume level.
- Charging Port: Insert charging cable into this port and connect to a 5V USB charger. A red light indicates charging; a green light indicates fully charged.
- [M] Button: Press briefly to power on, hold for 1 second to power off.
- Volume [+] Button: Press to increase volume incrementally.
- Volume [-] Button: Press to decrease volume incrementally.
- Indicator Light: When powered on, the device enters frequency sync mode. A blinking green light indicates sync in progress, and a solid green light indicates successful sync. The light is off when the device is powered off. The device automatically powers off after 5 minutes of inactivity. Low battery is indicated by a blinking red light.
Diagram Description: The headset microphone unit has the following labeled parts: 1. Volume Lock Switch, 2. Charging Port (Type-C), 3. [M] Button, 4. Volume [+] Button, 5. Volume [-] Button, 6. Indicator Light.
Safety Instructions
To avoid electric shock, over temperature, fire, explosion, mechanical risk, and personal injury or property loss caused by improper use, please read and follow these instructions carefully before operation:
- Please check if the power of the connected equipment matches that of this product before operation. Adjust the volume to a proper level during operation. Do not operate at over-power or high-volume levels for extended periods to avoid product malfunction.
- If any abnormality occurs during use (e.g., smoke, strange odor), immediately switch off the power and unplug from the power source, then send the product to the local after-sales service for repair.
- Keep this product and its accessories in a dry and ventilated area. Do not store in humid or dusty environments for extended periods. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or blocking any ventilation openings to prevent malfunction.
- Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accidents.
- Do not disassemble or repair the product yourself to avoid injury. If you have any questions or require services, please contact your local after-sales service.
- The suitable altitude and climatic conditions for this product are determined by the selected power supply equipment.
About This Manual
This manual contains up-to-date technical specifications as of printing. However, specifications herein may not conform to your particular product, as Takstar is constantly improving its products. Specifications, devices, or accessories may also vary by region. For any questions, please contact your local sales outlet. For the latest version or more information, please visit our website: https://www.takstar.com.
Copyright ©2024 TAKSTAR. TAKSTAR, 得胜 (Desheng), and their respective logos are registered trademarks or trademarks of Guangdong Takstar Electronic Co., Ltd. in the PRC and/or other countries. All other trademarks are the property of their respective owners.
Product Service Warranty
Important Notes:
- This document serves as the warranty certificate. Please keep it safe. Lost certificates will not be replaced or honored for warranty service.
- Warranty Period: Twelve (12) months from the date of purchase.
- The company will provide free repair service for manufacturing defects, excluding damage caused by force majeure events.
- Damage due to improper storage or usage will be subject to charges by the service center.
- Unauthorized disassembly or repair will void the warranty.
- These warranty terms are applicable only to the China market (excluding Hong Kong, Macau, and Taiwan regions).
Warranty Record (for service personnel):
| Name: | Phone: | Address: | Purchase Date: | Model: | Warranty Service Record (filled by technician) | Technician Signature: | Date: |
|---|---|---|---|---|---|---|---|
Manufacturer Information
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo, Huizhou, Guangdong 516121, China
Service Hotline: 400 6828 333
Fax: 86 752 6383952
Email: sales@takstar.com
Website: https://www.takstar.com
Scan the QR code for more product information.
