Takstar SM20 Professional Recording Microphone

Preface

Dear Customer, Thanks for purchasing the Takstar SM20 professional recording microphone. We recommend reading this manual thoroughly for proper use. If you have any questions or suggestions, please contact our local sales service.

Product Features

• Capsule: Ø26mm gold-sputtered diaphragm for wide dynamic range and fast response.
• Frequency Response: Broad frequency response captures subtle sound nuances.
• Circuitry: Optimized circuitry provides an excellent signal-to-noise ratio for clearer audio.
• Sound Pressure Level: High sound pressure level handling, ideal for vocals and instruments.
• Body: Zinc alloy body with an elegant champagne gold finish, offering EMI shielding.
• Shock Mount: Features a rubber suspension design for enhanced stability and reduced vibration transmission.
• Pop Filter: Dual-layer metal pop filter minimizes plosive and air noise.

Applications

Suitable for vocal recording, professional recording, live streaming, and instrument recording.

Package Contents

• 1 x Microphone
• 1 x Shock Mount
• 1 x Pop Filter
• 1 x Windscreen
• 1 x 3m XLR Cable (Male to Female)
• 2 x Rubber Band
• 1 x User Manual

Technical Specifications

• Capsule: Ø26mm gold-sputtered diaphragm condenser
• Polar Pattern: Cardioid (Uni-directional)
• Frequency Response: 20Hz - 20kHz
• Sensitivity: -32dB ±3dB (0dB=1V/Pa at 1kHz)
• Equivalent Noise Level: ≤20dBA (IEC 581-5)
• Maximum SPL: 130dB (THD ≤1% at 1kHz)
• Output Impedance: 100Ω ±30% (at 1kHz)
• Operating Voltage: 48V Phantom Power
• Dimensions: 157mm * 55mm * 38mm
• Weight: Approx. 323g

Polar Pattern Diagram

The polar pattern diagram shows a polar plot illustrating the microphone's sensitivity at different angles around the capsule, indicating a cardioid (uni-directional) pickup pattern at 1kHz.

Frequency Response Curve

The frequency response curve is a graph plotting the microphone's output level in dB (y-axis) against frequency in Hz (x-axis), illustrating its sensitivity across the audible frequency range from 20Hz to 20kHz.

Operating Instructions

1. Attach the shock mount to a microphone stand or boom arm, securing it with the locking knob. Position the shock mount with the top facing up and the bottom nut down to prevent the microphone from falling.
2. Identify the front of the microphone, marked with "SM20" and a circular polar pattern symbol (○). Align this front side with the sound source, place the microphone into the shock mount, and securely tighten the bottom nut.
3. Install the included pop filter onto the shock mount. Note: The pop filter and windscreen are interchangeable; use only one at a time. The pop filter maintains sound fidelity, while the windscreen offers better saliva protection but may slightly affect microphone aesthetics and sound quality.
4. Connect the microphone's output to an audio device (e.g., audio interface, mixer, power amplifier) that provides 48V phantom power, using the included XLR cable. If the audio device does not have phantom power, a separate 48V phantom power supply must be purchased. Note: Required phantom power specifications: DC 48V ±4V / 2.8mA ±20%.
5. Secure the connecting cable to the stand or boom arm, leaving a loop near the microphone for shock isolation.
6. When operating, first set the audio device's volume low, then turn on the phantom power. Gradually increase the volume to a suitable level to avoid damaging speakers. Maintain a distance between the microphone and speakers, and avoid pointing them directly at each other to prevent feedback.
7. The microphone output uses a three-pin XLRM connector. The pin configuration is as follows: Pin 1 (ground), Pin 2 (positive), Pin 3 (negative).

Connection Diagrams

1. For devices with 48V supply:

This diagram illustrates connecting the microphone to a PC via a USB data cable to an audio interface. The microphone connects to the audio interface using a male/female XLR cable.

2. For devices without 48V supply:

This diagram shows connecting the microphone to a 48V phantom power supply via a male/female XLR cable. The phantom power supply is then connected to an audio interface via a male/female XLR cable. The audio interface is connected to a PC.

Safety Instructions

To prevent electric shock, overheating, fire, radiation, explosion, mechanical hazards, injury, or property loss due to improper use, please read and follow these instructions:

1. Before operation, ensure the connected equipment's power matches this product. Adjust volume to a proper level during operation. Do not operate at over-power or high-volume levels for extended periods to prevent product malfunction.
2. If any abnormality occurs during use (e.g., smoke, strange odor), immediately switch off the power, unplug from the power source, and send the product to an authorized service center for repair.
3. If using an external power adapter, ensure it is CCC certified and meets required standards.
4. Store the product and accessories in a dry, ventilated area. Avoid humid or dusty environments for extended periods. Keep away from fire, rain, liquid, impact, dropping, or blocking ventilation openings to prevent malfunction.
5. Abide by safety rules during operation. Do not use the product in locations where it is prohibited by law or regulations to avoid accidents.
6. Do not disassemble or repair the product yourself to avoid injury. For questions or service, contact your local dealer.

Environmental Information

Hazardous Substances Table

○: Indicates that the content of the hazardous substance in all homogeneous materials of this component is below the limit requirement specified in GB/T 26572.

X: Indicates that the content of the hazardous substance in at least one homogeneous material of this component exceeds the limit requirement specified in GB/T 26572.

This table is compiled according to SJ/T 11364.

The symbol indicates the environmentally friendly use period of the product. This period is valid only under normal operating temperature and humidity conditions.

Label Meanings

CE Marking

This device is compliant with the limits of the European Council Directive on the approximation of the laws of the member states relating to electromagnetic compatibility (Directive 2004/108/EG) and the European Low Voltage Directive (Directive 2006/95/EG).

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.

WEEE Disposal Symbol

This symbol indicates that the product should not be disposed of with household waste, according to the WEEE directive (2012/19/EU) and national law. It should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling can negatively impact the environment and human health due to hazardous substances. Proper disposal contributes to the effective usage of natural resources. For more information, contact your local city office, waste authority, or household waste disposal service.

About This Manual

This manual contains up-to-date technical specifications as of printing. However, specifications may not conform to your specific product as Takstar continuously improves its products. Specifications, devices, or accessories may vary by region. For questions, contact your local sales outlet. For the latest version or more information, visit the Takstar website: https://www.takstar.com/.

Copyright ©2024 TAKSTAR. TAKSTAR, 得胜 (Desheng), and their respective logos are registered trademarks or trademarks of Guangdong Takstar Electronic Co., Ltd. in the PRC and/or other countries. All other trademarks are the property of their respective owners.

Product Service Warranty

Important Notes:

1. This document serves as the warranty certificate. Please keep it properly. Loss of this certificate means no warranty or replacement.
2. Warranty Period: Twelve months from the date of purchase.
3. Free repair service is provided by the company, except for damages caused by force majeure events.
4. For damages caused by improper storage or use, repair fees will be charged at the discretion of the service center.
5. Unauthorized disassembly or repair will void the warranty.
6. These warranty terms are applicable only within the Chinese market (excluding Hong Kong, Macau, and Taiwan regions).

Customer Name:

Product:

Phone:

Address:

Model:

Purchase Date: Year ____ Month ____ Day ____

Maintenance Record (to be filled by service personnel)

Guangdong Takstar Electronic Co., Ltd. | Phone: 400-6828-333 | Address: No.2 Fukang Yi Road, Longxi Street, Boluo County, Huizhou City, Guangdong Province, China.

Contact Information

Scan the QR code for more product information.

Designed & Manufactured by: Guangdong Takstar Electronic Co., Ltd.

Address: No.2 Fu Kang Yi Rd., Longxi Boluo, Huizhou, Guangdong 516121 China

Tel: 86 752 6383644 | Fax: 86 752 6383952

Email: sales@takstar.com

Website: www.takstar.com