Vention 10000mAh Power Bank (VWS-F138)

Introduction

The power bank is housed in a PC+ABS shell and is equipped with an LED digital display. It is powered by a rechargeable battery, providing versatile functionality and robust expansion capabilities. The three different-specified AC plugs are flexible enough to adapt to different power outlets worldwide. It supports both wired charging with built-in Lightning and USB-C cables and convenient 15W magnetic wireless charging, eliminating the need to carry extra cables when on the go.

Specifications

What's in the Box

• 10000mAh Power Bank x 1
• EU Converter x1
• UK Converter x 1
• User Manual x 1

Connect with Vention

For more interesting information and events, please follow Vention on social media platforms:

• [Facebook]
• [LinkedIn]
• [Instagram]

For warranty service or support, please contact the Vention team:

Website: www.ventiontech.com Email: vention@ventiontech.com

Below are QR codes linking to Vention's social media platforms:

[QR code for Vention social media]

[QR code for Vention social media]

[QR code for Vention social media]

Instructions for Use

Charge the Power Bank

1. Select the appropriate plug for the power bank, insert it into the socket, and start charging. (For the EU/UK converter, simply attach it without removing or replacing the original plug: For US/CN sockets, unfold the plug to fit accordingly and start charging.)
2. Use an external cable to connect the USB-A port for charging the power bank.

Charge Your Devices

1. Plug the built-in USB-C/Lightning cable into your phone or other device to begin charging.
2. Place your magnetic wireless charging-compatible device near the wireless charging area of the power bank. It will automatically align and snap into the correct charging position to start charging.
3. Use a suitable cable to connect your device to the USB-A port of the power bank for charging.

Notes

• Do not use the product in humid, high temperature or outdoor conditions.
• Do not pour water into the product and use the water-immersed one.
• Do not disassemble the product.
• Do not use the product if damaged surface founded.
• Keep the in-use product out of reach of children to prevent accidents.
• Stop using the product immediately if there is significant heating.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2A7Z4-FHX

Engineering and Production Information

Company: 宁波福茂通讯科技有限公司 (NINGBO FULMAN COMMUNICATION TECHNOLOGY CO.,LTD)

Product Name: FHX Series All-in-One Power Bank 10000mAh

Part Name: 22.5W Digital Display User Manual

Designer: Jacky

Model: VWS-F138

Unit: mm

Rev: AO

Page: 1/1

Update: 2024/11/22

ECN Record: 2024/08/14 Initial Release A, 2024/11/22 Added FCC ID A1

Folded Size: 70x90mm

Unfolded Size: 210x90mm

Material: 157g matte coated paper, 3-page accordion fold, double-sided printing

Printing: Blue ink: C100 M:0 Y:0 K:0 Reference: Pantone Process Cyan C