Vention Wireless HDMI Transmitter and Receiver

Specifications

• Model: ADP
• Interface: USB-C/HDMI
• Electroplating Process: Nickel-Plated
• Material: ABS
• Resolution: 1080P@60Hz
• Power Supply: 5V=2A
• Wireless Frequency: 2.4GHz + 5GHz
• Effective Range: 200M Max (1TX-1RX); 120M Max (1TX-2RX); 80M Max (1TX-3RX); 80M Max (1TX-4RX)

Product Overview

Transmitter-TX

The Transmitter-TX is a compact device with the following ports and controls:

• ① Function Button: Used for pairing and privacy mode operations.
• ② USB-C Power Supply: Port for connecting to a power source.
• ③ HDMI Port: Connects to the HDMI output of the source device.

Receiver-RX

The Receiver-RX is a compact device with the following ports and controls:

• ① Function Button: Used for pairing and resetting the device.
• ② USB-C Power Supply: Port for connecting to a power source.
• ③ HDMI Port: Connects to the HDMI input of the display device.

Screen Mirroring

Plug and Play

Transmitter-TX Setup: Connect the transmitter to a source device with an HDMI output.

Receiver-RX Setup:

1. Connect the HDMI port of the receiver to the display device (e.g., monitor or TV).
2. Connect the USB-C power port of the receiver to a charger or USB-C power port (5V=2A) and turn on the receiver.
3. Set the display device to the correct HDMI input. The startup screen will appear when the receiver is ready.
4. Connect the transmitter to a device with an HDMI output. Wait for the indicator light to flash to complete the connection.

What's in the Box

• Wireless HDMI Transmitter x 1 + Receiver x 4
• USB-C Charging Cable x 5
• HDMI Extension Cable x 4
• User Manual x 1

TX-RX Pairing

The two devices are pre-paired during manufacturing. If pairing fails due to improper handling or other issues, follow these steps to reset and re-pair them:

1. Press and hold the Receiver (RX) Function Button for 5s or more until "Pairing Timeout: 905" appears on the screen, indicating Pairing Mode.
2. Press and hold the Transmitter (TX) Function Button for 5s or more.

FAQs

Q1: How do I reset to default settings?

A1: If the product malfunctions, press and hold the Receiver (RX) Function Button for 15s. The screen will go black and restart, resetting to default settings.

Q2: How do I enter Privacy Mode?

A2: Simply press the Transmitter (TX) Function Button to disconnect or reconnect.

Q3: Can devices without a HDMI port be used?

A3: Yes, but please use a full-featured HDMI adapter with the device.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• -Reorient or relocate the receiving antenna.
• -Increase the separation between the equipment and receiver.
• -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• -Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC ID: 2A7Z4-ADP