SurpLife LED Controller User Instruction

I. Product Parameter

Category: LED Controller

Domination Principle: BLUETOOTH 5.2

APP: SurpLife

Operation Platform: Android 7.0/IOS 12.0 or later

Input Voltage: DC5V/DC(12-24)V

Supported Driver IC: SPI:WS2812B, SM16703, SM16704, WS2811, UCS1903, SK6812, INK1003, UCS2904B

Signal Output: Support one-wire driver IC, able to control up to 2048 pixels

Max Output Power: 30W/144W

Working Temperature: -20~+55°C

Control Distance: Visible distance 30M

Certification: CE, RoHS, FCC

Size: 55MM*27MM*11MM

1. About Settings

1) In the setting interface, you can set the IC model, color correction, number of points (Total number of points cannot exceed 300 in each segment and total LED chips quantity cannot exceed 2048).

2) The setting of IC number is applied to the smearing function.

Device Information Example:

(Screenshots show app interface for setting number of lights per segment and total lights, with options for IC type and color calibration.)

2. Detailed introduction of APP functions:

A) Multi color function

The color of the light can be adjusted by the whole and each segment. The app provides different columns for color selection or editing, and the brightness can also be adjusted. In the segmentation interface, users can freely smear or erase the color of each segment, and also set the gradient effect.

(Screenshots show the app interface for color selection and adjustment, with options for color, color card, slider, and recent colors.)

B) Scene settings

There are four built-in scenes: "Life", "Scenery", "Festivals", "Mood". Users can click "DIY" or "Collection" to create their favorite light effect.

(Screenshots show various pre-set lighting effects like Christmas Lights, Wreath, Fence, Trees, and DIY options.)

C) Playlist mode

Multiple light dynamic modes are built-in. Users can set the time of lighting effects and enter cycle mode. Select different scene modes, then set the duration of each scene respectively, and play it by combining the sequence of different lighting effects.

(Screenshots demonstrate creating a playlist by selecting scenes, setting durations, and combining effects.)

D) Smear function

Click "+" to DIY the lighting color and dynamic effects, then save it. Before DIY, please set the number of IC in "Settings" to ensure that the number of lights is consistent with the device. Otherwise, the lighting effect will be incorrect. Before customizing, please ensure that the IC number in the app setting is the same as the light device; otherwise, the lighting effect will be incorrect.

(Screenshots show the DIY interface for creating custom lighting effects, including static, flowing, twinkling, and direction/speed adjustments.)

E) Music Mode

1. Synchronization function of lighting and music rhythm.

Click "Add Music" > Import a music file or import it from the built-in music library.

(Screenshots show the music mode interface, allowing users to select music from their phone or the built-in library.)

2. MIC

The lights' color will change with the sound rhythm when your phone microphone catches the sound. The microphone sensitivity can be adjusted by the slider. There are two ways to input the audio signal on the controller: built-in APP microphone and external microphone (for sound control version).

(Screenshots show the music synchronization interface, with options for phone mic or device mic input.)

F) Light timer

Smart lights automatically come on and off at given times through the timer function. Choose your favorite effect and color, then save it.

(Screenshots illustrate setting schedules for the lights to turn on/off, with options for selecting effects, colors, and repeat days.)

G) Group Control

This mode allows you to create different groups to control more than one controller at the same time.

(Screenshots show the interface for creating and managing groups of controllers.)

H) Link

Setting a group for the strip lights allows you to enjoy the linkage lighting effect. Hold and drag the device on the list to change the order and the direction.

1. The grouped light strips synchronized linkage.
2. The grouped light strips change sequentially.

(Screenshots show the linked devices list, demonstrating sequential and synchronized lighting effects.)

Attentions

a) Please use the product in a dry environment.

b) For input voltage, please use the DC voltage within the specified range as instructed in the manual. Do not connect into 220V AC directly, as this may cause a malfunction.

c) The product requires a common anode connection. An incorrect connection will cause a malfunction.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.