Welcome
Dear customer, Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user's manual. If you have any questions, please contact our customer care center. Our contact details are below:
Contact Information
| Country | Phone | |
|---|---|---|
| US | 001-877-644-9366 | customerservice@aosom.com |
| CA | 416-792-6088 | customerservice@aosom.ca |
| UK | 0044-800-240-4004 | enquiries@mhstar.co.uk |
| DE | 0049-0(40)-88307530 | service@aosom.de |
| FR | 0033-1-84166106 | aosom@mhfrance.fr |
| ES | 0034-931294512 | atencioncliente@aosom.es |
| PT | 0034-931294512 | info@aosom.pt |
| IT | 0039-0249471447 | clienti@aosom.it |
Important Notes Before Assembly
General Assembly Tips
- To keep the bed and cover flat, please adjust the fabric with some force to move into the right position when assembling.
- For steps 5-6, please align metal pipes with plastic parts first, then insert the pipes into the plastic parts.
- For step 5, the velcro may not be completely covered. As the cover is used for a period of time, it will become a little looser than before, then you could tighten the cover velcro completely.
- When the cover has been used for a while, you will be able to tighten the velcro.
Parts List
- Part A: Metal pipe (x2)
- Part B: Bed legs (x4)
- Part C: Metal pipes (x4)
- Part D: Centre plastic junctions (x2)
- Part E: Bed support leg (x1)
- Part F: Pet bed fabric/frame (x1)
Assembly Instructions
Step 1: Attach Pipe A to Fabric
Separate the velcro on the back of the cover and insert the metal pipe A into the fabric as illustrated.
Step 2: Insert Legs B into Pipe A
Insert 2 bed legs B into metal pipe A.
Step 3: Insert Pipes C into Legs B
Insert 2 metal pipes C into the bed legs B as illustrated.
Step 4: Connect Junctions D to Leg E and Pipes C
Connect the 2 centre plastic junctions D to the bed support leg E as illustrated. Then insert plastic junctions D into metal pipes C.
Step 5: Insert Remaining Pipes C
Insert the other 2 metal pipes C into plastic junctions D.
Step 6: Connect Pipe A with Legs B and Pipes C
Connect metal pipe A with 2 bed legs B, then insert B into pipes C.
Step 7: Secure Velcro
Pull hard over the metal pipe A, then stick the velcro. (See note 3 in general tips).
Step 8: Final Check
Turn the pet bed over.
Importer Information
US: Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. MADE IN CHINA.
CA: Imported by Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. MADE IN CHINA.
UK: IMPORTER ADDRESS: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH. MADE IN CHINA.
FR: ADRESSE D'IMPORTATION: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. FABRIQUÉ EN CHINE.
ES: IMPORTADOR: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. B66295775. WWW.AOSOM.ES. ATENCIONCLIENTE@AOSOM.ES. TEL: 931294512. HECHO EN CHINA.
PT: SPANISH AOSOM, S.L., C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ. TEL: 931294512 (SEG-SEX DAS 7:30H ÀS 16:30H). INFO@AOSOM.PT. WWW.AOSOM.PT.
DE: ADRESSE DES IMPORTEURE: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. IN CHINA HERGESTELLT.
IT: IMPORTATO DA: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). P.I.: 08567220960. FATTO IN CINA.
