Assembly Instructions
43228645 OAK LOOK BEDSIDE TABLE
Important Information
⚠️ WARNING: DO NOT STAND, SIT OR LEAN ON THIS UNIT. DO NOT USE THIS UNIT AS A STEP LADDER OR AS A CHOPPING SURFACE. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS UNIT UNLESS ALL BOLTS AND SCREWS ARE FIRMLY SECURED. DO NOT PLACE HOT ITEMS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE ITEM.
CARE INSTRUCTIONS: TO BE ASSEMBLED ON A CLEAN, DRY AND SMOOTH SURFACE. WIPE CLEAN WITH A SOFT DAMP CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. CHECK AND TIGHTEN ALL PARTS REGULARLY. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT. STORE IN A DRY PLACE. FOR INDOOR USE ONLY.
MAXIMUM SAFE LOAD: 10KGS FOR TOP PANEL, 5KGS FOR DRAWER, 5KGS FOR SHELF.
Hardware List
| Part | Description | Quantity |
|---|---|---|
| A | Screw (M6x35mm) | 12pcs |
| B | Dowel (Ø15x9.5mm) | 12pcs |
| C | Dowel (Ø6x30mm) | 14pcs |
| D | Screw (M4x35mm) | 8pcs |
| E | Screw (M4x30mm) | 4pcs |
| F | Screw (M3.5x10mm) | 16pcs |
| G | Screw (M2x16mm) | 6pcs |
| H | Bracket | 1pc |
| I | Cam Lock | 2pcs |
| J | Cam Bolt | 4pcs |
| K | Handle | 1pc |
| L | Wall Anchor Fitting | 1pc |
| 1 | Side Panel | 1pc |
| 2 | Side Panel | 1pc |
| 3 | Base Panel | 1pc |
| 4 | Back Panel | 1pc |
| 5 | Base Panel | 1pc |
| 6 | Side Panel | 1pc |
| 7 | Drawer Front | 1pc |
| 8 | Drawer Side Panel | 1pc |
| 9 | Drawer Side Panel | 1pc |
| 10 | Drawer Back Panel | 1pc |
| 11 | Drawer Base Panel | 1pc |
| 12 | Leg | 4pcs |
Assembly Steps
-
Step 1: Attach Bracket
Attach part H (1pc) to panel 3 using the indicated holes.
Tool required: Philips Head Screw Driver (Not Provided)
-
Step 2: Assemble Main Frame Sides
Attach panels 3 and 4 to panel 5. Use 4x screw A, 4x dowel B, and 4x dowel C. Ensure the panels are aligned correctly.
Tool required: Philips Head Screw Driver (Not Provided)
-
Step 3: Attach Cam Bolts and Locks
Insert 2x cam lock I into the designated holes on panel 2. Insert 4x cam bolt J into the designated holes on panels 1 and 2.
Tool required: Philips Head Screw Driver (Not Provided)
-
Step 4: Connect Main Frame Panels
Connect panels 1 and 2 to the assembled frame (panel 5). Use 4x screw A, 4x dowel B, 8x dowel C, and 4x screw D. Ensure correct orientation for drawer slide alignment.
Tool required: Philips Head Screw Driver (Not Provided)
-
Step 5: Attach Drawer Runners and Side Panels
Attach 4x part E to the inside of panels 5 and 2. Attach 16x part F and 6x part G to the exterior of panels 5 and 2, likely for securing other components or drawer runners.
Tools required: Philips Head Screw Driver (Not Provided), Hammer (Not Provided)
-
Step 6: Attach Legs
Attach the 4x legs (part 12) to the underside of the base panel (part 3). Screw them in by hand, turning clockwise.
Tool required: None (Hand tighten)
-
Step 7: Assemble Drawer Box
Connect drawer side panels 8 and 9 to drawer back panel 10 using 4x screw D.
Tool required: Philips Head Screw Driver (Not Provided)
-
Step 8: Insert Drawer Base
Slide the drawer base panel 11 into the grooves of the assembled drawer frame (panels 8, 9, 10).
Tool required: None
-
Step 9: Attach Drawer Front and Runners
Attach the drawer front (part 7) to the drawer sides. Use 4x screw A, 4x dowel B, and 2x dowel C. Ensure the drawer runners are correctly positioned on the drawer sides.
Tool required: Philips Head Screw Driver (Not Provided)
-
Step 10: Insert Drawer
Slide the assembled drawer into the bedside table frame.
Tool required: None
-
Step 11: Attach Handle
Attach the handle (part K) to the drawer front (part 7) using the provided screw.
Tool required: Philips Head Screw Driver (Not Provided)
-
Step 12: Wall Anchoring
Attach the wall anchor fitting L (1pc) to the top rear of the bedside table. Secure the unit to the wall using appropriate wall fixings (not provided). This is strongly recommended for safety.
Tools required: Philips Head Screw Driver (Not Provided), Drill (Not Provided), Wall Fixings (Not Provided)
User Safety Instructions
It is strongly recommended that this product is permanently fixed to the wall.
- Please seek professional advice if you are in doubt of what fixing device to use.
- Regularly check that anchors are securely maintained.
- Stability of tall items may be affected by thick pile carpet or uneven floors.
- Do not place unanchored televisions on furniture.
CAUTION: For your safety when attaching the anchor fixings, please note the following:
- Check any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure, please seek professional advice from a qualified tradesperson).
WARNING: PLEASE SECURE YOUR FURNITURE WITH THE SUPPLIED WALL FIXING. SCAN THE CODE FOR MORE INFORMATION. [QR code excluded as per instructions]
Toppling Hazard.
