Thermaltake CORE V21
Your Build. Our Core
This document is the user manual for the Thermaltake CORE V21 computer case.
Chapter 1. Product Introduction
- 1.1 Specification
- 1.2 Accessory
- 1.3 Warning and Notice
Chapter 2. Installation Guide
2.1 Side Panel Disassembly
Description: Remove the screws on the back of the chassis and open the side panel.
2.2 PSU Installation
Description: 1. Place the power supply in the proper location and secure it with screws. 2. Place the PSU rubber on the bracket. 3. Secure the bracket with the case by locking hook. 4. Install the bracket in the proper location and secure it with screws.
2.3 Motherboard Installation
Description: Install the motherboard in the proper location and secure it with screws.
2.4 3.5" & 2.5" HDD Installation
Description: 1. Pull the HDD tray out. 2. Place the 2.5" or 3.5" hard drive on the tray and secure it with screws. 3. Slide the HDD tray back into the HDD cage.
2.5 2.5" HDD Installation
Description: Place the 2.5" HDD in the proper location and secure it with screws.
2.6 PCI Slot Usage
Description: 1. Loosen the screws with a screwdriver. 2. Install the PCI card in the proper location and secure it with screws.
2.7 Air Cooling Installation
Description: This section details fan support for various locations (Front, Top, Rear, Bottom, Left/Right Side) and sizes (120mm, 140mm, 200mm). For example, the front supports 1x 120mm or 2x 120mm fans, or 1x 140mm or 2x 140mm fans, or 1x 200mm fan.
2.8 Liquid Cooling Installation
Description: This section details radiator support for various locations (Front, Top, Rear, Left/Right Side) and sizes (120mm, 140mm, 240mm, 280mm). For example, the front supports 1x 120mm or 1x 240mm radiator, or 1x 140mm radiator.
2.9 Bracket Installation
Description: Mount the fans and radiators on the bracket and secure them with screws. Then, secure the bracket by locking clip.
2.10 I/O Panel Placement Guide
Description: This section illustrates the placement of I/O panel components (labeled A, B, C) within the computer case.
2.11 Stacking Installation
Description: This section shows how to stack multiple CORE V21 cases together.
Chapter 3. Leads Installation
3.1 Case LED Connection
Description: Connect the case LEDs and switch leads to the motherboard's panel header. Refer to your motherboard manual for correct pin assignments.
3.2 USB 3.0 Connection
Description: Connect the USB 3.0 cable to the available USB 3.0 port on your motherboard.
3.3 Audio Connection
Description: Connect the audio connectors according to the illustration and your motherboard manual. Ensure your motherboard supports AC'97 or HD Audio (Azalia) to avoid damage.
HD AUDIO Function Table
| PORT1 L | PORT1 R | PORT2 R | PORT2 L | SENSE_SEND | SENSE1_RETURN | SENSE2_RETURN | AUD GND | PRESENCE# | |
| Color | BROWN | RED | YELLOW | PURPLE | BLUE | BLACK | ORANGE | BLACK | KEY |
USB Function Table
| VCC1 | VCC2 | D1- | D1+ | GND | NC | |||||
| Color | RED2 | RED1 | WHITE2 | WHITE1 | GREEN2 | GREEN1 | BLACK2 | BLACK1 | N.C | KEY |
USB 3.0 Connection Diagram: Shows the USB 3.0 connector and its pin assignments.
Chapter 4. Other
4.1 Thermaltake Power Supply Series (Optional)
Thermaltake offers optional power supply units designed for high performance and reliability. These units are built with quality components and undergo rigorous testing, including burn-in tests and Hipot tests, to ensure stability and safety. Thermaltake power supplies aim for high efficiency (at least 80%) and hold numerous 80 PLUS certifications, contributing to energy saving and reduced environmental impact. The company provides warranties ranging from 2 to 7 years as a commitment to quality and sustainability.
For more information on Thermaltake power supply product lines, please visit their official website or Facebook page:
- Brand official website: http://www.thermaltake.com/
- Global Facebook: https://www.facebook.com/ThermaltakeInc
- Taiwan Facebook: https://www.facebook.com/Thermaltake TW
Specifications
| Case Type | Micro Case |
| Dimension (H*W*D) | 336 x 320 x 424 mm (13.2 x 12.6 x 16.7 inch) |
| Side Panel | Transparent Window |
| Material | SPCC |
| Cooling System | Front (intake): 200 x 200 x 30 mm fan (800rpm, 13dBA) |
| Drive Bays | 3 x 3.5", 3 x 2.5" -Hidden |
| Expansion Slots | 5 |
| Motherboard | 6.7" x 6.7" (Mini ITX), 9.6" x 9.6" (Micro ATX) |
| I/O Port | USB 3.0 x 2, HD Audio x 1 |
| Clearance | CPU cooler height limitation: 185mm VGA length limitation: 350mm PSU length limitation: 200mm (Without bottom fan) |
Accessory
| Figure | Parts Name | Q'ty | Used for |
| [Screw] | Screw #6-32 x 6 mm | 4 | PSU |
| [Rubber Washer] | PSU Rubber | 2 | PSU (Bottom) |
| [Bracket] | PSU Bracket 1 | 1 | PSU |
| [Bracket] | PSU Bracket 2 | 1 | PSU |
| [Screw] | Screw #6-32 x 6 mm | 1 | PSU Bracket |
| [Stand-off] | Stand-off #6-32 x 6 mm | 2 | Motherboard |
| [Screw] | Screw #6-32 x 5 mm | 9 | Motherboard |
| [Screw] | Screw M3 x 6 mm | 18 | 2.5"HDD |
| [Screw] | Screw Ø 5 x 10 mm | 12 | Fan |
| [Cable Tie] | Cable Tie | 7 | Cable Management |
| [Screw] | Screw #6-32 x 15 mm | 2 | Stacking |
| [Nut] | Flange Nut # 6-32 | 2 | Stacking |
| [Gasket] | Stacking Gasket | 2 | Stacking |
Warning and Notice
CPU Cooler Height Limitation: The height limit for the CPU heatsink is 185 mm (7.3 inches).
VGA (Add-on card) Length Limitation: The length limit for the VGA (graphics card) is 350 mm (13.8 inches).
