Thermaltake V150 TG ARGB Breeze PC Case User Manual

Introduction

TT Premium: Thermaltake's TT Premium brand signifies a commitment to delivering perfect user experiences through supreme quality products and innovative design. It represents passion for DIY, Modding, and a desire to be a leading innovator in the PC hardware market, offering excellent quality, unique design, diverse combinations, and boundless creativity for high-performance PC products.

Tt LCS-Liquid Cooling Support Certification: This is an exclusive Thermaltake certification for products that meet rigorous design and enthusiast standards for Liquid Cooling System (LCS) chassis. It designates chassis tested for optimal compatibility with extreme liquid cooling configurations, ensuring the best performance and fitment.

Join Tt Community: Thermaltake values customer feedback and invites users to join their Community Forums. Benefits include quick support, advice for new builds, updates on new products, sharing builds, and participating in contests and giveaways.

Official Links:

• Brand Official Website: http://www.thermaltake.com/
• Global Facebook: https://www.facebook.com/ThermaltakeInc
• Taiwan Facebook: http://www.facebook.com/ThermaltakeTW
• Global Community Forums: http://community.thermaltake.com

Contents

Chapter 1. Product Introduction

• 1.0 Specification
• 1.1 Accessory
• 1.2 Warning and Notice

Chapter 2. Installation Guide

• 2.0 Side Panel Disassembly
• 2.1 Power Supply Unit (PSU) Installation
• 2.2 Motherboard Installation
• 2.3 3.5" & 2.5" HDD Installation
• 2.4 PCI Card Installation
• 2.5 Air Cooling Installation
• 2.6 AIO Liquid Cooling Installation
• 2.7 I/O Connection
• 2.8 ARGB Control Instruction

1.0 Specification

1.1 Accessory

For ARGB Version Only:

1.2 Warning and Notice

Chassis Dimensions

Diagram showing the external dimensions of the PC case: Height 440mm, Width 208mm, Depth 425.6mm (main body) / 398mm (front panel to rear panel).

CPU Cooler Maximum Height

Diagram illustrating the interior of the case with a CPU cooler installed, indicating a maximum cooler height clearance of 155mm.

Motherboard Compatibility

Diagram showing the motherboard mounting tray, highlighting support for Mini-ITX (ITX) and Micro-ATX (mATX) form factors, with a maximum width of 244mm for mATX.

VGA Length Maximum Length

Diagram showing the interior of the case with a graphics card installed, indicating a maximum VGA length clearance of 350mm (when the front fan is not installed).

PSU Maximum Length

Diagram showing the PSU mounting area, indicating a maximum PSU length clearance of 220mm.

Radiator Support

Diagram indicating radiator mounting locations and sizes: Front supports 240mm or 280mm radiators. Rear supports a 120mm radiator.

2.0 Side Panel Disassembly

Diagram showing the rear of the case. Arrows indicate that screws securing the side panel should be removed. The side panel is then shown sliding or swinging open.

To remove the side panel, locate and unscrew the retaining screws on the rear of the chassis. The side panel can then be carefully detached.

2.1 Power Supply Unit (PSU) Installation

Diagram showing the PSU being inserted into its designated bay at the bottom rear of the case. Screws are shown to secure the PSU.

Install the Power Supply Unit (PSU) into the PSU bay. Secure it using the appropriate screws (e.g., [Screw #6-32 x 6mm]).

2.2 Motherboard Installation

Diagram showing a motherboard being placed onto standoffs inside the case. Screws are shown to secure the motherboard. A CPU cooler is also depicted on the motherboard.

Install the motherboard standoffs into the case chassis. Carefully place the motherboard onto the standoffs, aligning the screw holes. Secure the motherboard with the appropriate screws (e.g., [Screw M3 x 5mm]).

2.3 3.5" & 2.5" HDD Installation

3.5" HDD Installation

Diagram showing a 3.5" HDD being mounted into a drive cage or bracket. Screws ([Screw #6-32 x 10mm]) and rubber mounts ([Rubber Mount]) are shown for securing the drive.

Mount your 3.5" HDD into the designated drive bay or bracket. Use the [Screw #6-32 x 10mm] and [Rubber Mount] for secure installation.

2.5" HDD Installation

Diagram showing a 2.5" SSD being mounted onto a specific mounting point or bracket. Screws ([Screw M3 x 5mm]) and rubber mounts ([Rubber Mount]) are shown for securing the drive.

Mount your 2.5" SSD onto the designated mounting point or bracket. Use the [Screw M3 x 5mm] and [Rubber Mount] for secure installation.

2.4 PCI Card Installation

Diagram showing the installation of a PCI-e expansion card (e.g., graphics card) into the motherboard's PCI-e slot. The card is then shown being secured to the case's rear expansion slot bracket.

Insert your PCI-e expansion card (e.g., graphics card) into the appropriate PCI-e slot on the motherboard. Secure the card's bracket to the case chassis using the provided screws.

2.5 Air Cooling Installation

Diagram illustrating fan mounting locations: Front supports two 120mm or two 140mm fans. Rear supports one 120mm fan. Top supports one 120mm or one 140mm fan.

Install fans in the following locations:

• Front: Up to two 120mm or two 140mm fans.
• Rear: One 120mm fan.
• Top: One 120mm or one 140mm fan.

Use the [Screw T5 x 10mm] for fan installation.

2.6 AIO Liquid Cooling Installation

Diagram showing radiator mounting options: Front supports 240mm or 280mm radiators. Rear supports a 120mm radiator.

Install an All-In-One (AIO) liquid cooler radiator in the following locations:

• Front: Supports 240mm or 280mm radiators.
• Rear: Supports a 120mm radiator.

2.7 I/O Connection

Diagram showing the front panel I/O ports and their corresponding motherboard headers. Ports include Power Switch (POWER SW), Reset Switch (Reset), Power LED, HDD LED, USB 3.0, USB 2.0, and HD Audio.

Connect the front panel I/O cables to the corresponding headers on the motherboard:

• Power Switch (POWER SW)
• Reset Switch (Reset)
• Power LED
• HDD LED
• USB 3.0
• USB 2.0
• HD Audio

2.8 ARGB Control Instruction

The V150 TG ARGB Breeze features ARGB lighting control. The lighting can be controlled via the case's buttons or synchronized with compatible motherboards.

Case Button Control Modes:

• Wave Mode: Mode 1
• Flow Mode: Mode 2
• RGB Lighting (Single Color): Mode 3
• Radar Mode: Mode 4-10 (Cycles through Red, Yellow, Green, Cyan, Blue, White, Purple)
• Breath Mode: Mode 11-18 (Cycles through RGB, Red, Yellow, Green, Cyan, Blue, White, Purple)
• Full Lighted Mode: Mode 19
• Single Color: Mode 20-26 (Cycles through Red, Yellow, Green, Cyan, Blue, White, Purple)
• Light Off: Mode 27

Note: Long pressing the RGB button for 3 seconds will switch control between the case buttons and motherboard software. The fan will blink twice to confirm the change.

Motherboard Synchronization:

To synchronize ARGB lighting with your motherboard, connect the provided MB Signal Bridge Cable ([ARGB Cable]) to the appropriate ARGB header on your motherboard and the case's ARGB controller.

Diagrams show how to connect the ARGB cable to headers on ASUS (Aura Addressable Strip Header(s)), MSI (JRGB-strip Header(S)), ASROCK (Addressable RGB LED Header(s)), and GIGABYTE (AORUS RGB Fusion with Digital LEDs) motherboards.

• ASUS: Connect to Aura Addressable Strip Header(s) (+5V D G ADDR.LED).
• MSI: Connect to JRGB-strip Header(S) (JRAINBOW).
• ASROCK: Connect to Addressable RGB LED Header(s) (+5V D G ADDR.LED).
• GIGABYTE: Connect to AORUS RGB Fusion with Digital LEDs (+5V D G ADDR.LED).