Thermaltake View 270 TG ARGB
User's Manual
TT Premium
To continue achieving the corporate mission of delivering the perfect user experience, Thermaltake developed "TT Premium" with the essence of combining supreme quality products with a new logo design. TT Premium is far more than just a guarantee of quality. Behind the name, it represents the passion in DIY, Modding and Thermaltake's desire to be the most innovative brand in the PC hardware market. To satisfy the demand of the high-end PC users, TT Premium follows its core values of Excellent Quality, Unique Design, Diverse Combinations and Boundless Creativity to provide a high performance PC product for every enthusiast. Learn more at ttpremium.com.
Tt LCS-Liquid Cooling Support Certification
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure optimal performance from the best features and fitment.
Join Tt Community To Receive Benefits
Dear Valued Customer, Thank you for choosing Thermaltake. As a new user, Thermaltake values your thoughts and opinions, and your feedback is important. Thermaltake invites you to join its Community Forums. Register today to start enjoying the full benefits of the community.
Benefits of being a member:
- Quick and responsive user support
- Receive help and advice with new builds
- Keep up to date with new product releases
- Share your thoughts and builds with the community
- Enter monthly contests and giveaways
Brand official website: thermaltake.com
Global Facebook: facebook.com/ThermaltakeInc
Taiwan Facebook: facebook.com/ThermaltakeTW
Global community forums: community.thermaltake.com
Chapter 1. Product Introduction
1.0 Specification
| Feature | Detail |
|---|---|
| Case Type | Mid Tower |
| Dimension (H*W*D) | 456 x 230 x 454 mm (18 x 9.1 x 17.9 inch) |
| Panel | Tempered Glass x 2 |
| Material | SPCC |
| Cooling System | Right (intake): 120 x 120 x 25 mm ARGB Lite fan (1000rpm, 22.3 dBA) x 2 Rear (exhaust): 120 x 120 x 25 mm ARGB Lite fan (1000rpm, 22.3 dBA) x 1 |
| Drive Bays | 2 x 3.5", 1 x 2.5" or 2 x 2.5" |
| Expansion Slots | 7 |
| Motherboards | 6.7" x 6.7" (Mini ITX), 9.6" x 9.6" (Micro ATX), 12" x 9.6" (ATX), 12" x 13" (E-ATX) |
| I/O Port | USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support | Top: 3 x 120 mm, 2 x 120 mm, 1 x 120 mm, 2 x 140 mm, 1 x 140 mm Right (M/B Side): 2 x 120 mm, 1 x 120 mm Rear: 1 x 120 mm, 1 x 140 mm Power Cover: 3 x 120 mm, 2 x 120 mm, 1 x 120 mm |
| Radiator Support | Top: 1 x 360 mm, 1 x 240 mm, 1 x 120 mm Rear: 1 x 120 mm |
| Clearances | CPU cooler max height: 180 mm VGA max length: 420 mm PSU max length: 220 mm |
1.1 Accessory
| Parts Name | Quantity | Used for |
|---|---|---|
| Stand-off #6-32 x 6.5mm | 3 | Motherboard |
| Stand #6-32 x 6mm | 10 | Power Supply / VGA Card |
| Screw M3 x 5mm | 23 | Motherboard / 2.5" HDD / SSD |
| Screw #6-32 x 5mm | 8 | 3.5" HDD |
| Stand-off tool | 1 | Motherboard Stand-off Installation |
| Screw #6-32 x 28mm | 12 | Case Fan |
| Wipe cloth | 1 | Tempered glass |
| Zip Ties | 10 | Cable Management |
| Buzzer | 1 | Motherboard Alarm |
| Clip | 2 | Side Panel |
1.2 Warning and Notice
Chassis Dimension: The Thermaltake View 270 TG ARGB chassis measures 456mm (height) x 230mm (width) x 454mm (depth). A diagram illustrates these dimensions.
CPU Cooler Max Height: The maximum supported CPU cooler height is 180mm. A diagram shows the internal clearance for the CPU cooler.
Motherboard Compatibility: This chassis supports Mini ITX, Micro ATX, ATX, and E-ATX motherboards. E-ATX motherboards are supported up to 330.2mm wide without a side fan. A diagram illustrates the compatible motherboard sizes within the chassis.
VGA Max Length: The maximum supported VGA card length is 420mm. A diagram shows the internal clearance for the VGA card.
PSU Max Length: The maximum supported PSU length is 220mm. A diagram illustrates the PSU installation area and clearance.
Chapter 2. Installation Guide
2.0 Remove Panels
To remove the side panels: First, gently pull the top tempered glass panel upwards (1). Then, slide the rear tempered glass panel backward to detach it (2). Finally, open the metal side panel by swinging it outwards from the front (3).
2.1 Power Supply Unit (PSU) Installation
Install the PSU by sliding it into the designated compartment at the bottom rear of the chassis. Secure it with 4 screws (Stand #6-32 x 6mm).
2.2 Motherboard Installation
Place the motherboard into the chassis, aligning it with the stand-offs. Secure the motherboard using 9 screws (Screw M3 x 5mm). Use the provided stand-off tool for easier installation of motherboard stand-offs if needed.
2.3 3.5" & 2.5" HDD Installation
For 3.5" HDDs: Slide the 3.5" HDD into the drive bay tray (A) and secure it with 4 screws (Screw #6-32 x 5mm). Then, slide the tray back into the chassis.
For 2.5" SSDs/HDDs: Mount the 2.5" SSD/HDD onto the drive bay tray (A) or directly onto the chassis mounting points (B) and secure it with 4 screws (Screw M3 x 5mm). Then, slide the tray back into the chassis or secure the drive directly.
2.4 VGA Card Installation
Insert the VGA card into the appropriate PCIe slot on the motherboard. Secure the VGA card to the chassis with 2 screws.
2.5 Air Cooling Installation
The chassis supports various fan configurations:
- Top: Supports 2 x 140mm fans or 3 x 120mm fans.
- Rear: Supports 1 x 140mm fan or 1 x 120mm fan.
- M/B Side: Supports 2 x 120mm fans.
- Power Cover: Supports 3 x 120mm fans.
Install fans in the desired locations, securing them with appropriate screws (Screw #6-32 x 28mm).
2.6 AIO Liquid Cooling Installation
The chassis supports AIO liquid cooling radiators:
- Top: Supports up to a 360mm radiator.
- Rear: Supports up to a 120mm radiator.
Mount the radiator and fans to the designated areas, ensuring proper airflow and tube routing.
2.7 I/O Connection
Connect the front panel I/O cables to the corresponding headers on your motherboard. These include:
- USB 3.2 (Gen 2) Type-C connector
- USB 3.0 connectors (x2)
- HD Audio connector
- Front panel header for Power SW, Power LED, Reset SW, and HDD LED. Refer to your motherboard manual for specific pin assignments.
A diagram illustrates the I/O port types and the motherboard header pinout for power, reset, and LED indicators.
2.8 Remove Filters
The chassis features removable dust filters for easy cleaning. Filters are located at the Top, Front, and Bottom of the chassis. Gently pull or slide them out for maintenance.
2.9 ARGB Control Instruction - How to connect MB
To control the ARGB lighting, connect the ARGB cable from the chassis to the appropriate addressable RGB header on your motherboard. Common headers include:
- ASUS/ASRock/BIOSTAR: Aura Addressable Strip Header (+5V D G)
- MSI: JRGB-strip Header (+5V D G)
- GIGABYTE: AOURS RGB Fusion with Digital LEDs (VDG)
Ensure correct pin alignment to avoid damage. Refer to your motherboard manual for exact header locations and pin configurations.
Thermaltake Global
